Search for: All records

This paper presents alternate pairs of InGaN/GaN prestrained layers with varying indium compositions, which are inserted between the GaN/InGaN MQW active region and the n-GaN layer in a light-emitting diode (LED) nanostructure in order to obtain enhanced optical characteristics. The device is mounted on a silicon substrate followed by a GaN buffer layer that promotes charge injection by minimizing the energy barrier between the electrode and active layers. The designed device attains more than 2.897% enhancement in efficiency when compared with the conventional LED, which is attributed to the reduction of a polarization field within the MQW region. The proposed device with 15% indium composition in the prestrained layer attains a maximum efficiency of 85.21% and a minimized efficiency droop of 3.848% at an injection current of 40 mA, with high luminous power in the output spectral range. The device also shows a minimum blueshift in the spectral range, indicating a decrease in the piezoelectric polarization. 

We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results using APSYS software and compared with simulated AlGaN nanowire DUV LEDs. From the simulation results, significant efficiency droop was observed in AlGaN based devices, attributed to the significant electron leakage. However, compared to AlGaN nanowire DUV LEDs at similar emission wavelength, the proposed single quantum well (SQW) AlInN based light-emitters offer higher internal quantum efficiency without droop up to current density of 1500 A/cm²and high output optical power. Moreover, we find that transverse magnetic polarized emission is ∼ 5 orders stronger than transverse electric polarized emission at 238 nm wavelength. Further research shows that the performance of the AlInN DUV nanowire LEDs decreases with multiple QWs in the active region due to the presence of the non-uniform carrier distribution in the active region. This study provides important insights on the design of new type of high performance AlInN nanowire DUV LEDs, by replacing currently used AlGaN semiconductors. 

This paper reports the illustration of electron blocking layer (EBL)-free AlGaN light-emitting diodes (LEDs) operating in the deep-ultraviolet (DUV) wavelength at $\sim <\#comment/>270\mathrm{n}\mathrm{m}$. In this work, we demonstrated that the integration of an optimized thin undoped AlGaN strip layer in the middle of the last quantum barrier (LQB) could generate enough conduction band barrier height for the effectively reduced electron overflow into the $p\text{-}\mathrm{G}\mathrm{a}\mathrm{N}$region. Moreover, the hole injection into the multi-quantum-well active region is significantly increased due to a large hole accumulation at the interface of the AlGaN strip and the LQB. As a result, the internal quantum efficiency and output power of the proposed LED structure has been enhanced tremendously compared to that of the conventional $p\text{-}\mathrm{t}\mathrm{y}\mathrm{p}\mathrm{e}$EBL-based LED structure.