Search for: All records

Abstract This work systematically investigates the thermodynamic stability of Si_aO_b(M)_cC_dstructures derived from polymeric precursors incorporating metal fillers: Ta, Nb, and Hf, at 1200 and 1500°C. Structural characterization of the polymer derived ceramics (PDCs) employs X‐ray diffraction, Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy. Enthalpies of formation relative to crystalline components (metal oxide, silica, silicon carbide, and graphite) are obtained from thermodynamic measurements by high temperature oxide melt solution calorimetry. The enthalpies of formation (∆H°_{f, comp}) of Ta‐1200, Hf‐1200, Nb‐1200, Ta‐1500, Hf‐1500, and Nb‐1500 specimens are −137.82 ± 9.72, −256.31 ± 8.97, −82.80 ± 9.82, −182.80 ± 7.85, −292.54 ± 9.38, −224.98 ± 9.60 kJ/mol, respectively. Overall incorporation of Hf results in most thermodynamically stable structures at all synthesis temperatures. Si_aO_b(M)_cC_dspecimens employing Nb fillers undergo the most stable structural evolution in this temperature range. The results indicate strong thermodynamic drive for carbothermal reduction of metal oxide domains. Incorporation of Ta provides the greatest stabilization of SiO₃C mixed bonding environments. Ultimately, the choice of metal filler influences composition, structural evolution, and thermodynamic stability in PDCs. 

Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH_1.96N_0.02(LHN) from LuH₂and LuN to be −28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism. 

Abstract This study presents new experimental data on the thermodynamic stability of SiC(O) and SCN(O) ceramics derived from the pyrolysis of polymeric precursors: SMP‐10 (polycarbosilane), PSZ‐20 (polysilazane), and Durazane‐1800 (polysilazane) at 1200°C. There are close similarities in the structure of the polysilazanes, but they differ in crosslinking temperature. High‐resolution X‐ray photoelectron spectroscopy shows notable differences in the microstructure of all polymer‐derived ceramics (PDCs). The enthalpies of formation (∆H°_{f, elem}) of SiC(O) (from SMP‐10), SCN(O) (from PSZ‐20), and SCN(O) (from Durazane‐1800) are −20 ± 4.63, −78.55 ± 2.32, and −85.09 ± 2.18 kJ/mol, respectively. The PDC derived from Durazane‐1800 displays greatest thermodynamic stability. The results point to increased thermodynamic stabilization with addition of nitrogen to the microstructure of PDCs. Thermodynamic analysis suggests increased thermodynamic drive for forming SiCN(O) microstructures with an increase in the relative amount of SiN_xC_4−xmixed bonds and a decrease in silica. Overall, enthalpies of formation suggest superior stabilizing effect of SiN_xC_4−xcompared to SiO_xC_4−xmixed bonds. The results indicate systematic stabilization of SiCN(O) structures with decrease in silicon and oxygen content. The destabilization of PDCs resulting from higher silicon content may reach a plateau at higher concentrations. 

Accurate chemical analysis of small samples of fine powders in the Si–O–C–H system is challenging. We present a comparison of analysis by X-ray photoelectron spectroscopy (XPS) and combustion analysis, validating XPS as an accurate and simple methodology for Si, C, and O analysis to give bulk and not just surface compositions. The XPS analyses are supported by showing consistency in thermochemical calculations of heats of formation based on high temperature oxide melt solution calorimetry. However, because XPS is not suitable for quantitation of hydrogen, it must be combined with other techniques for samples with substantial H content.