skip to main content

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, February 13 until 2:00 AM ET on Friday, February 14 due to maintenance. We apologize for the inconvenience.


Search for: All records

Creators/Authors contains: "Lipke, Elizabeth A."

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. For drug discovery, new in vitro cancer models are needed to obtain more translatable study outcomes in a low-cost and high-throughput manner. For this purpose, 3D cancer spheroids have been established as more effective than 2D models. Current commercial techniques, however, rely heavily on self-aggregation of dissociated cells and cannot replicate key features of the native tumor microenvironment, particularly due to a lack of control over extracellular matrix components and heterogeneity in size and aggregate-forming tendencies. Also, current spheroidal techniques are typically limited to one spheroid per well, therefore providing a narrow range of cell numbers per well, disadvantageous for assay development in drug screening. Here, we overcome these challenges by coupling tissue engineering toolsets with microfluidic technologies to create engineered cancer microspheres and sorting desired numbers of microspheres into assay-ready well-plate format. To form the engineered cancer microspheres, MCF7 (non-metastatic) and MDA-MB-231 (metastatic) breast cancer cells were encapsulated within poly(ethylene glycol)-fibrinogen hydrogels using our previously developed microfluidic platform. Highly uniform cancer microspheres (intra and inter-batch coefficient of variation ≤ 5%) with high cell densities (over 20 × 106 cells/ml) were produced rapidly, which is critical for use in drug testing. The microspheres supported the 3D culture of both breast cancer cell lines over at least 14 days in culture. Encapsulated cells displayed cell type-specific differences in morphology, proliferation, metabolic activity, ultrastructure, and overall microsphere size distribution and bulk stiffness. To prepare assay-ready pre-plated microspheres, a COPAS FP flow cytometer was used for its ability to analyze and sort large sample particles such as tumor spheroids and hydrogel cancer microspheres generated in this study. When using a 96-well plate, the sorting rate varied from 2.5 - 6 microspheres per second, depending on the sample concentration. When sorting a desired number of microspheres per well, the accuracy was greater than 95% as verified visually by microscopy. Viability of sorted microspheres was verified 24 hours post-sort. Shipping conditions were established that maintained cell viability for remote use in drug testing. Methods for compound addition by pinning and imaging were tested and optimized. Using these approaches, the microsphere system was shown to be compatible with an automated liquid handling system for administration of drug compounds; MDA-MB-231 microspheres were distributed in 384 well plates and treated with chemotherapeutic drugs. Expected responses were quantitated using CellTiter-Glo® 3D and detected using automated imaging. Overall, our results demonstrate initial applicability for the tissue-engineered cancer microspheres for drug screening. 
    more » « less
  2. Colorectal cancer (CRC) is the third-most leading cause of cancer-related deaths in the United States. To advance the understanding of CRC tumor progression, models which mimic the tumor microenvironment (TME) and have translatable study outcomes are urgently needed. CRC patient-derived xenografts (PDXs) are promising tools for their ability to recapitulate tumor heterogeneity and key patient tumor characteristics, such as molecular characteristics. However, as in vivo models, CRC PDXs are costly and low-throughput, which leads to a need for equivalent in vitro models. To address this need, we previously established an in vitro model using a tissue engineering toolset with CRC PDX cells. However, it is unclear whether tissue engineering has the capacity to maintain patient- and/or cancer stage-specific tumor heterogeneity. To address this gap, we employed three PDX tumor lines, originated from stage II, III-B, and IV CRC tumors, in the formation of 3D engineered CRC PDX (3D-eCRC-PDX) tissues and performed an in-depth comparison between the 3D-eCRC-PDX tissues and the original CRC-PDX tumors. To form the tissues, CRC-PDX tumors were expanded in vivo and dissociated. The isolated cells were encapsulated within poly(ethylene glycol)-fibrinogen hydrogels and remained viable and proliferative post encapsulation over the course of 29 days in culture. To gain molecular insight into the maintenance of PDX line stage heterogeneity, we performed a transcriptomic analysis using RNA seq to determine the extent to which there were similarities and differences between the CRC-PDX tumors and the 3D-eCRC-PDX tissues. We observed the greatest correspondence in overlapping differentially expressed human genes, gene ontology, and Hallmark gene set enrichment between the 3D-eCRC-PDX tissues and CRC-PDX tumors in the stage II PDX line, while the least correspondence was observed in the stage IV PDX line. The Hallmark gene set enrichment from murine mapped RNA seq transcripts was PDX line-specific which suggested that the stromal component of the 3D-eCRC-PDX tissues was maintained in a PDX line-dependent manner. Consistent with our transcriptomic analysis, we observed that tumor cell subpopulations, including human proliferative (B2M+Ki67+) and CK20+ cells, remained constant for up to 15 days in culture even though the number of cells in the 3D-eCRC-PDX tissues from all three CRC stages increased over time. Yet, tumor cell subpopulation differences in the stage IV 3D-eCRC-PDX tissues were observed starting at 22 days in culture. Overall, our results demonstrate a strong correlation between our in vitro 3D-eCRC-PDX models and the originating in vivo CRC-PDX tumors, providing evidence that these engineered tissues may be capable of mimicking patient- and/or cancer stage-specific heterogeneity. 
    more » « less
  3. Abstract There is a need for new in vitro systems that enable pharmaceutical companies to collect more physiologically-relevant information on drug response in a low-cost and high-throughput manner. For this purpose, three-dimensional (3D) spheroidal models have been established as more effective than two-dimensional models. Current commercial techniques, however, rely heavily on self-aggregation of dissociated cells and are unable to replicate key features of the native tumor microenvironment, particularly due to a lack of control over extracellular matrix components and heterogeneity in shape, size, and aggregate forming tendencies. In this study, we overcome these challenges by coupling tissue engineering toolsets with microfluidics technologies to create engineered cancer microspheres. Specifically, we employ biosynthetic hydrogels composed of conjugated poly(ethylene glycol) (PEG) and fibrinogen protein (PEG-Fb) to create engineered breast and colorectal cancer tissue microspheres for 3D culture, tumorigenic characterization, and examination of potential for high-throughput screening (HTS). MCF7 and MDA-MB-231 cell lines were used to create breast cancer microspheres and the HT29 cell line and cells from a stage II patient-derived xenograft (PDX) were encapsulated to produce colorectal cancer (CRC) microspheres. Using our previously developed microfluidic system, highly uniform cancer microspheres (intra-batch coefficient of variation (CV) ≤ 5%, inter-batch CV < 2%) with high cell densities (>20×106 cells/ml) were produced rapidly, which is critical for use in drug testing. Encapsulated cells maintained high viability and displayed cell type-specific differences in morphology, proliferation, metabolic activity, ultrastructure, and overall microsphere size distribution and bulk stiffness. For PDX CRC microspheres, the percentage of human (70%) and CRC (30%) cells was maintained over time and similar to the original PDX tumor, and the mechanical stiffness also exhibited a similar order of magnitude (103 Pa) to the original tumor. The cancer microsphere system was shown to be compatible with an automated liquid handling system for administration of drug compounds; MDA-MB-231 microspheres were distributed in 384 well plates and treated with staurosporine (1 μM) and doxorubicin (10 μM). Expected responses were quantified using CellTiter-Glo® 3D, demonstrating initial applicability to HTS drug discovery. PDX CRC microspheres were treated with Fluorouracil (5FU) (10 to 500 μM) and displayed a decreasing trend in metabolic activity with increasing drug concentration. Providing a more physiologically relevant tumor microenvironment in a high-throughput and low-cost manner, the PF hydrogel-based cancer microspheres could potentially improve the translational success of drug candidates by providing more accurate in vitro prediction of in vivo drug efficacy. Citation Format: Elizabeth A. Lipke, Wen J. Seeto, Yuan Tian, Mohammadjafar Hashemi, Iman Hassani, Benjamin Anbiah, Nicole L. Habbit, Michael W. Greene, Dmitriy Minond, Shantanu Pradhan. Production of cancer tissue-engineered microspheres for high-throughput screening [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 175. 
    more » « less
  4. null (Ed.)
  5. Abstract

    This study establishes a novel microfluidic platform for rapid encapsulation of cells at high densities in photocrosslinkable microspherical hydrogels including poly(ethylene glycol)‐diacrylate, poly(ethylene glycol)‐fibrinogen, and gelatin methacrylate. Cell‐laden hydrogel microspheres are advantageous for many applications from drug screening to regenerative medicine. Employing microfluidic systems is considered the most efficient method for scale‐up production of uniform microspheres. However, existing platforms have been constrained by traditional microfabrication techniques for device fabrication, restricting microsphere diameter to below 200 µm and making iterative design changes time‐consuming and costly. Using a new molding technique, the microfluidic device employs a modified T‐junction design with readily adjustable channel sizes, enabling production of highly uniform microspheres with cell densities (10–60 million cells mL−1) and a wide range of diameters (300–1100 µm), which are critical for realizing downstream applications, through rapid photocrosslinking (≈1 s per microsphere). Multiple cell types are encapsulated at rates of up to 1 million cells per min, are evenly distributed throughout the microspheres, and maintain high viability and appropriate cellular activities in long‐term culture. This microfluidic encapsulation platform is a valuable and readily adoptable tool for numerous applications, including supporting injectable cell therapy, bioreactor‐based cell expansion and differentiation, and high throughput tissue sphere‐based drug testing assays.

     
    more » « less