Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Economic models and watershed models provide useful results, but when seeking to integrate these systems, the temporal units typically utilized by these models must be reconciled. A hydrologic-economic modeling framework is built to couple the Hydrological Simulation Program-Fortran (HSPF), representing the watershed system, with the Rectangular Choice-of-Technology (RCOT) model, an extension of the basic input-output (I-O) model. This framework is implemented at different sub-annual timesteps to gain insight in selecting temporal units best suited for addressing questions of interest to both economists and hydrologists. Scenarios are designed to examine seasonal increases in nitrogen concentration that occur because of agricultural intensification in Cedar Run Watershed, located in Fauquier County, northern Virginia. These scenarios also evaluate the selection among surface water, groundwater, or a mix of (conjunctive use) practices for irrigation within the crop farming sector in response to these seasonal impacts. When agricultural intensification occurs in Cedar Run Watershed, implementing conjunctive use in irrigation reduces the seasonal increases in nitrogen concentration to specified limits. The most efficient of the conjunctive use strategies explicitly considered varies depending on which timestep is utilized in the scenario: a bi-annual timestep (wet and dry season) vs. a seasonal timestep. This modeling framework captures the interactions between watershed and economic systems at a temporal resolution that expands the range of questions one can address beyond those that can be analyzed using the individual models linked in this framework.more » « less
Economic input-output and watershed models provide useful results, but these kinds of models do not use the same spatial units, which typically limits their integration. A modular hydrologic-economic modeling framework is designed to couple the Rectangular Choice-of-Technology (RCOT) model, a physically constrained, input-output (I-O) model, with the Hydrological Simulation Program-Fortran (HSPF). Integrating these two models can address questions relevant to both economists and hydrologists, beyond addressing only administrative or watershed concerns. This framework is utilized to evaluate alternative future development prospects within Fauquier County, northern Virginia, specifically residential build-up, and agricultural intensification in the upstream location of the local watershed. Scenarios are designed to evaluate the downstream impacts on watershed health caused by upstream development and changes made within the economic sectors in response to these impacts. In the first case, an alternative residential water technology is more efficient than the standard for ensuring adequate water supply downstream. For scenarios involving upstream agricultural intensification, a crop shift from grains to fruits and vegetables is the most efficient of the alternatives considered. This framework captures two-way feedback between watershed and economic systems that expands the types of questions one can address beyond those that can be analyzed using these models individually.more » « less
We quantify the lake dynamics, near‐bottom turbulence, flux of dissolved oxygen (DO) across the sediment‐water interface (SWI) and their interactions during oxygenation in two lakes. Field observations show that the lake dynamics were modified by the bubble plumes, showing enhanced mixing in the near‐field of the plumes. The interaction of the bubble‐induced flow with the internal density structure resulted in downwelling of warm water into the hypolimnion in the far‐field of the plumes. Within the bottom boundary layer (BBL), both lakes show weak oscillating flows primarily induced by seiching. The vertical profile of mean velocity within 0.4 m above the bed follows a logarithmic scaling. One lake shows a larger drag coefficient than those in stationary BBLs, where the classic law‐of‐the‐wall is valid. The injection of oxygen elevated the water column DO and hence, altered the DO flux across the SWI. The gas transfer velocity is driven by turbulence and is correlated with the bottom shear velocity. The thickness of the diffusive boundary layer was found to be consistent with the Batchelor length scale. The dynamics of the surface renewal time follow a log‐normal distribution, and the turbulent integral time scale is comparable to the surface renewal time. The analyses suggest that the effect of bubble plumes on the BBL turbulence is limited and that the canonical scales of turbulence emerge for the time‐average statistics, validating the turbulence scaling of gas transfer velocity in low‐energy lakes.
The use of systems science methodologies to understand complex environmental and human health relationships is increasing. Requirements for advanced datasets, models, and expertise limit current application of these approaches by many environmental and public health practitioners.
A conceptual system-of-systems model was applied for children in North Carolina counties that includes example indicators of children’s physical environment (home age, Brownfield sites, Superfund sites), social environment (caregiver’s income, education, insurance), and health (low birthweight, asthma, blood lead levels). The web-based Toxicological Prioritization Index (ToxPi) tool was used to normalize the data, rank the resulting vulnerability index, and visualize impacts from each indicator in a county. Hierarchical clustering was used to sort the 100 North Carolina counties into groups based on similar ToxPi model results. The ToxPi charts for each county were also superimposed over a map of percentage county population under age 5 to visualize spatial distribution of vulnerability clusters across the state.
Data driven clustering for this systems model suggests 5 groups of counties. One group includes 6 counties with the highest vulnerability scores showing strong influences from all three categories of indicators (social environment, physical environment, and health). A second group contains 15 counties with high vulnerability scores driven by strong influences from home age in the physical environment and poverty in the social environment. A third group is driven by data on Superfund sites in the physical environment.
This analysis demonstrated how systems science principles can be used to synthesize holistic insights for decision making using publicly available data and computational tools, focusing on a children’s environmental health example. Where more traditional reductionist approaches can elucidate individual relationships between environmental variables and health, the study of collective, system-wide interactions can enable insights into the factors that contribute to regional vulnerabilities and interventions that better address complex real-world conditions.
null (Ed.)To capture the interactions between hydrologic and economic systems necessary for modeling water quality at a sufficient level of spatial detail, we have designed a modular framework that couples an economic model with a watershed model. To represent the economic system, the Rectangular Choice-of-Technology (RCOT) model was used because it represents both the physical and monetary aspects of economic activities and, unlike traditional input-output or general equilibrium models, it can optimize choices among operational technologies in addition to the amount and location of production. For the first implementation of this modeling framework, RCOT is coupled with a watershed model, Hydrological Simulation Program-Fortran (HSPF), which was calibrated to represent Cedar Run Watershed in northern Virginia. This framework was used to analyze eight scenarios related to the expansion of agricultural activity in Fauquier County. The database for RCOT used county-level input-output data representative of the region in 2012. Thus, when crop farming was expanded to fully utilize the farmland available in the watershed, the nitrogen concentration at the outflow of the watershed increased from 0.6 to 4.3 mg/L. However, when RCOT could select between a standard and a more nitrogen-efficient management practice, the outflow nitrogen concentration only increased to 2.6 mg/L because RCOT selected the more resource-efficient practice. Building on this modular framework, future work will involve designing more realistic scenarios that can test policy options and regional planning decisions in a wide range of watersheds.more » « less
null (Ed.)Many researchers use one-dimensional (1-D) and three-dimensional (3-D) coupled hydrodynamic and water-quality models to simulate water quality dynamics, but direct comparison of their relative performance is rare. Such comparisons may quantify their relative advantages, which can inform best practices. In this study, we compare two 1-year simulations in a shallow, eutrophic, managed reservoir using a community-developed 1-D model and a 3-D model coupled with the same water-quality model library based on multiple evaluation criteria. In addition, a verified bubble plume model is coupled with the 1-D and 3-D models to simulate the water temperature in four epilimnion mixing periods to further quantify the relative performance of the 1-D and 3-D models. Based on the present investigation, adopting a 1-D water-quality model to calibrate a 3-D model is time-efficient and can produce reasonable results; 3-D models are recommended for simulating thermal stratification and management interventions, whereas 1-D models may be more appropriate for simpler model setups, especially if field data needed for 3-D modeling are lacking.more » « less
null (Ed.)The pathways taken throughout any model-based process are undoubtedly influenced by the modeling team involved and the decision choices they make. For interconnected socioenvironmental systems (SES), such teams are increasingly interdisciplinary to enable a more expansive and holistic treatment that captures the purpose, the relevant disciplines and sectors, and other contextual settings. In practice, such interdisciplinarity increases the scope of what is considered, thereby increasing choices around model complexity and their effects on uncertainty. Nonetheless, the consideration of scale issues is one critical lens through which to view and question decision choices in the modeling cycle. But separation between team members, both geographically and by discipline, can make the scales involved more arduous to conceptualize, discuss, and treat. In this article, the practices, decisions, and workflow that influence the consideration of scale in SESs modeling are explored through reflexive accounts of two case studies. Through this process and an appreciation of past literature, we draw out several lessons under the following themes: (1) the fostering of collaborative learning and reflection, (2) documenting and justifying the rationale for modeling scale choices, some of which can be equally plausible (a perfect model is not possible), (3) acknowledging that causality is defined subjectively, (4) embracing change and reflection throughout the iterative modeling cycle, and (5) regularly testing the model integration to draw out issues that would otherwise be unnoticeable.more » « less
null (Ed.)Increasing numbers of chemicals are on the market and present in consumer products. Emerging evidence on the relationship between environmental contributions and prevalent diseases suggests associations between early-life exposure to manufactured chemicals and a wide range of children’s health outcomes. Using current assessment methodologies, public health and chemical management decisionmakers face challenges in evaluating and anticipating the potential impacts of exposure to chemicals on children’s health in the broader context of their physical (built and natural) and social environments. Here, we consider a systems approach to address the complexity of children’s environmental health and the role of exposure to chemicals during early life, in the context of nonchemical stressors, on health outcomes. By advancing the tools for integrating this more complex information, the scope of considerations that support chemical management decisions can be extended to include holistic impacts on children’s health.more » « less