Search for: All records

Phosphorus (P) is essential for plant growth, but excessive and continuous application of P fertilizers and animal manure has led to the accumulation of legacy phosphorus (legacy-P) in soils. While legacy-P presents a potential resource to support future agricultural demands, limited understanding of its chemical forms across different soil types hinders its sustainable management. This study aimed to characterize the chemical nature and storage potential of legacy-P in three contrasting soil types: acidic, organic, and calcareous. Key soil properties—including pH, organic matter, total P, Mehlich-3 P, and concentrations of aluminum (Al), calcium (Ca), iron (Fe), and magnesium (Mg)—were evaluated alongside P fractionation using a modified Hedley method. Furthermore, the soil P saturation ratio (PSR) was calculated to evaluate the relative saturation of soil sorption sites with P. Results showed considerable variability in Mehlich-3 P across soil types, ranging from 7–62% of total P in acidic soils, 1–8% in organic soils, and 3–47% in calcareous soils. Acidic soils were dominated by humic/fulvic-bound P (> 42%), organic soils by recalcitrant residual P (> 62%), and calcareous soils by Ca/Mg-bound P (> 69%), highlighting the influence of soil chemistry on P stability. Despite considerable variation among soil types in P fractionations, PSR results suggested that Ca/Mg-associated minerals play a greater role in retaining legacy P in organic and calcareous soils than Al- and Fe-associated minerals. In acidic soils, both mineral groups contributed similarly to P retention. 

Abstract Consumption of fresh produce, such as leafy greens, is often encouraged as part of a healthy diet. Hence, indoor facilities for hydroponic production of leafy greens are increasingly being established. However, fresh produce entails a higher risk of microbial foodborne illnesses than processed foods.Listeria monocytogenesis a major source of fresh produce contamination and is among the leading causes of severe foodborne illnesses in the United States, with a 16% mortality rate. Tools for rapid monitoring are needed for pathogens such asL. monocytogenesto prevent outbreaks. In this manuscript, we have demonstrated the feasibility of a multi-aptamer approach for development of label-free aptasensors targetingL. monocytogenesin irrigation water for lettuce hydroponic production. We use screening studies with surface plasmon resonance to rationally develop mixtures of relevant aptamers for targetingL. monocytogenes. Based on this screening, multiple aptamers targeting extracellular structures on intactL. monocytogeneswere tethered to platinum-modified laser inscribed graphene electrodes. This is the first report of aL. monocytogenesbiosensor based on laser inscribed graphene. We show that mixing multiple aptamers with varying affinity improves the diagnostic performance over one aptamer alone in complex sample matrices (lettuce hydroponic water). Multi-aptamer biosensors showed high accuracy forL. monocytogenesand were at least three times more selective thanEscherichia coli(Crooks, K12, O157:H7) with an accuracy of 85%. The limit of detection (10 CFU/10 mL) is based on data which were significantly different after calibration towardL. monocytogenesorE. coli(Crooks) and validated against gold standard molecular analysis (polymerase chain reaction). Rapid screening of pathogens is a global need to meet food safety and water quality regulations. This study shows the importance of sensors targeting more than one bacterial surface structure in complex samples relevant to the food-water nexus. 

This review illuminates established knowledge of root–arbuscular mycorrhizal fungi (AMF)–plant mutualism to study the uptake of phosphorus (P) as a critical element for plant nutrition. We focus on P cycling, underscoring the role of AMF in enhancing P acquisition and plant resilience in the rhizosphere. The role(s) of plant roots, root exudates, and biomolecules in relevant soil processes is emphasized in this manuscript. Enhancing P uptake efficiency through AMF interaction presents a promising avenue for sustainable agriculture, with future research opportunities focusing on understanding underlying mechanisms and developing innovative technologies as a need to transition from the use of AMF as a biofertilizer or as an inoculation alternative for seeds to being an inspiration for the development of technology adapted to different crops. This is important to promote responsible agricultural practices and improve crop yields. We provide definitions of key terms and concepts for one of the best-known natural sustainable phosphorus systems. This manuscript illuminates and aims to inspire technology development to overcome the challenge of plant nutrition under P scarcity conditions. 

Abstract In this work, we demonstrate the development of a rapid and label-free electrochemical biosensor to detect Listeria monocytogenes using a novel stimulus–response thiomer nanobrush material. Nanobrushes were developed via one-step simultaneous co-deposition of nanoplatinum (Pt) and alginate thiomers (ALG-thiomer). ALG-thiomer/Pt nanobrush platform significantly increased the average electroactive surface area of electrodes by 7 folds and maintained the actuation properties (pH-stimulated osmotic swelling) of the alginate. Dielectric behavior during brush actuation was characterized with positively, neutral, and negatively charged redox probes above and below the isoelectric point of alginate, indicating ALG-thiomer surface charge plays an important role in signal acquisition. The ALG-thiomer platform was biofunctionalized with an aptamer selective for the internalin A protein on Listeria for biosensing applications. Aptamer loading was optimized and various cell capture strategies were investigated (brush extended versus collapsed). Maximum cell capture occurs when the ALG-thiomer/aptamer is in the extended conformation (pH > 3.5), followed by impedance measurement in the collapsed conformation (pH < 3.5). Low concentrations of bacteria (5 CFU mL −1 ) were sensed from a complex food matrix (chicken broth) and selectivity testing against other Gram-positive bacteria ( Staphylococcus aureus ) indicate the aptamer affinity is maintained, even at these pH values. The new hybrid soft material is among the most efficient and fastest (17 min) for L. monocytogenes biosensing to date, and does not require sample pretreatment, constituting a promising new material platform for sensing small molecules or cells. 

Molecularly imprinted plasmonic nanosensors are robust devices capable of selective target interaction, and in some cases reaction catalysis. Recent advances in control of nanoscale structure have opened the door for development of a wide range of chemosensors for environmental monitoring. The soaring rate of environmental pollution through human activities and its negative impact on the ecosystem demands an urgent interest in developing rapid and efficient techniques that can easily be deployed for in-field assessment and environmental monitoring purposes. Organophosphate pesticides (OPPs) play a significant role for agricultural use; however, they also present environmental threats to human health due to their chemical toxicity. Plasmonic sensors are thus vital analytical detection tools that have been explored for many environmental applications and OPP detection due to their excellent properties such as high sensitivity, selectivity, and rapid recognition capability. Molecularly imprinted polymers (MIPs) have also significantly been recognized as a highly efficient, low-cost, and sensitive synthetic sensing technique that has been adopted for environmental monitoring of a wide array of environmental contaminants, specifically for very small molecule detection. In this review, the general concept of MIPs and their synthesis, a summary of OPPs and environmental pollution, plasmonic sensing with MIPs, surface plasmon resonance (SPR), surface-enhanced Raman spectroscopy (SERS) MIP sensors, and nanomaterial-based sensors for environmental monitoring applications and OPP detection have been elucidated according to the recent literature. In addition, a conclusion and future perspectives section at the end summarizes the scope of molecularly imprinted plasmonic sensors for environmental applications. 

Bacterial contamination in food-processing facilities is a critical issue that leads to outbreaks compromising the integrity of the food supply and public health. We developed a label-free and rapid electrochemical biosensor for Listeria monocytogenes detection using a new one-step simultaneous sonoelectrodeposition of platinum and chitosan (CHI/Pt) to create a biomimetic nanostructure that actuates under pH changes. The XPS analysis shows the effective co-deposition of chitosan and platinum on the electrode surface. This deposition was optimized to enhance the electroactive surface area by 11 times compared with a bare platinum–iridium electrode (p < 0.05). Electrochemical behavior during chitosan actuation (pH-stimulated osmotic swelling) was characterized with three different redox probes (positive, neutral, and negative charge) above and below the isoelectric point of chitosan. These results showed that using a negatively charged redox probe led to the highest electroactive surface area, corroborating previous studies of stimulus–response polymers on metal electrodes. Following this material characterization, CHI/Pt brushes were functionalized with aptamers selective for L. monocytogenes capture. These aptasensors were functional at concentrations up to 106 CFU/mL with no preconcentration nor extraneous reagent addition. Selectivity was assessed in the presence of other Gram-positive bacteria (Staphylococcus aureus) and with a food product (chicken broth). Actuation led to improved L. monocytogenes detection with a low limit of detection (33 CFU/10 mL in chicken broth). The aptasensor developed herein offers a simple fabrication procedure with only one-step deposition followed by functionalization and rapid L. monocytogenes detection, with 15 min bacteria capture and 2 min sensing.