Search for: All records

The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos. 

ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and$7\mathrm{GeV}/c$beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be$380\pm 26\mathrm{mbarns}$for the$6\mathrm{GeV}/c$setting and$379\pm 35\mathrm{mbarns}$for the$7\mathrm{GeV}/c$setting.

Published by the American Physical Society2024 

A comprehensive study of the local and nonlocal amplitudes contributing to the decayB⁰→K^*0(→K⁺π⁻)μ⁺μ⁻is performed by analysing the phase-space distribution of the decay products. The analysis is based onppcollision data corresponding to an integrated luminosity of 8.4 fb⁻¹collected by the LHCb experiment. This measurement employs for the first time a model of both one-particle and two-particle nonlocal amplitudes, and utilises the complete dimuon mass spectrum without any veto regions around the narrow charmonium resonances. In this way it is possible to explicitly isolate the local and nonlocal contributions and capture the interference between them. The results show that interference with nonlocal contributions, although larger than predicted, only has a minor impact on the Wilson Coefficients determined from the fit to the data. For the local contributions, the Wilson Coefficient$$ {\mathcal{C}}_9 $$$C_9$, responsible for vector dimuon currents, exhibits a 2.1σdeviation from the Standard Model expectation. The Wilson Coefficients$$ {\mathcal{C}}_{10} $$$C_{10}$,$$ {\mathcal{C}}_9^{\prime } $$$C_9^{\prime }$and$$ {\mathcal{C}}_{10}^{\prime } $$$C_{10}^{\prime }$are all in better agreement than$$ {\mathcal{C}}_9 $$$C_9$with the Standard Model and the global significance is at the level of 1.5σ. The model used also accounts for nonlocal contributions fromB⁰→ K^*0[τ⁺τ⁻→ μ⁺μ⁻] rescattering, resulting in the first direct measurement of thebsττvector effective-coupling$$ {\mathcal{C}}_{9\tau } $$$C_{9\tau }$.

 

The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements and provide comparisons to detector simulations. 

A search for hidden-charm pentaquark states decaying to a range of${\mathrm{\Sigma }}_c\overline{D}$and${\mathrm{\Lambda }}_c^{+}\overline{D}$final states, as well as doubly charmed pentaquark states to${\mathrm{\Sigma }}_{c}D$and${\mathrm{\Lambda }}_c^{+}D$, is made using samples of proton-proton collision data corresponding to an integrated luminosity of$5.7{\mathrm{fb}}^{-1}$recorded by the LHCb detector at$\sqrt{s}=13\mathrm{TeV}$. Since no significant signals are found, upper limits are set on the pentaquark yields relative to that of the${\mathrm{\Lambda }}_c^{+}$baryon in the${\mathrm{\Lambda }}_c^{+}\to p{K}^{-}{\pi }^{+}$decay mode. The known pentaquark states are also investigated, and their signal yields are found to be consistent with zero in all cases.

© 2024 CERN, for the LHCb Collaboration2024CERN 

Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen.

 

A search for the fully reconstructed$$ {B}_s^0 $$$B_s^0$→ μ⁺μ⁻γdecay is performed at the LHCb experiment using proton-proton collisions at$$ \sqrt{s} $$$\sqrt{s}$= 13 TeV corresponding to an integrated luminosity of 5.4 fb⁻¹. No significant signal is found and upper limits on the branching fraction in intervals of the dimuon mass are set$$ {\displaystyle \begin{array}{cc}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu}^{+}{\mu}^{-}\right)\in \left[2{m}_{\mu },1.70\right]\textrm{GeV}/{c}^2,\\ {}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<7.7\times {10}^{-8},&\ m\left({\mu}^{+}{\mu}^{-}\right)\in \left[\textrm{1.70,2.88}\right]\textrm{GeV}/{c}^2,\\ {}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu}^{+}{\mu}^{-}\right)\in \left[3.92,{m}_{B_s^0}\right]\textrm{GeV}/{c}^2,\end{array}} $$$\begin{array}{cc}B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(2m_{\mu },1.70\right)\mathrm{GeV}/c^2,\\ B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<7.7\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(\mathrm{1.70,\; 2.88}\right)\mathrm{GeV}/c^2,\\ B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(3.92,m_{B_s^0}\right)\mathrm{GeV}/c^2,\end{array}$

at 95% confidence level. Additionally, upper limits are set on the branching fraction in the [2m_μ,1.70] GeV/c²dimuon mass region excluding the contribution from the intermediateϕ(1020) meson, and in the region combining all dimuon-mass intervals.

 

The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. 

Abstract This article describes the setup and performance of the near and far detectors in the Double Chooz experiment. The electron antineutrinos of the Chooz nuclear power plant were measured in two identically designed detectors with different average baselines of about 400 m and 1050 m from the two reactor cores. Over many years of data taking the neutrino signals were extracted from interactions in the detectors with the goal of measuring a fundamental parameter in the context of neutrino oscillation, the mixing angle $$\theta _{13}$$ θ 13 . The central part of the Double Chooz detectors was a main detector comprising four cylindrical volumes filled with organic liquids. From the inside towards the outside there were volumes containing gadolinium-loaded scintillator, gadolinium-free scintillator, a buffer oil and, optically separated, another liquid scintillator acting as veto system. Above this main detector an additional outer veto system using plastic scintillator strips was installed. The technologies developed in Double Chooz were inspiration for several other antineutrino detectors in the field. The detector design allowed implementation of efficient background rejection techniques including use of pulse shape information provided by the data acquisition system. The Double Chooz detectors featured remarkable stability, in particular for the detected photons, as well as high radiopurity of the detector components. 

The production of 𝜂 and 𝜂′ mesons is studied in proton-proton and proton-lead collisions collected with the LHCb detector. Proton-proton collisions are studied at center-of-mass energies of 5.02 and 13TeV and proton-lead collisions are studied at a center-of-mass energy per nucleon of 8.16TeV. The studies are performed in center-of-mass (c.m.) rapidity regions 2.5<𝑦c.m.<3.5 (forward rapidity) and −4.0<𝑦c.m.<−3.0 (backward rapidity) defined relative to the proton beam direction. The 𝜂 and 𝜂′ production cross sections are measured differentially as a function of transverse momentum for 1.5<𝑝T<10GeV and 3<𝑝T<10GeV, respectively. The differential cross sections are used to calculate nuclear modification factors. The nuclear modification factors for 𝜂 and 𝜂′ mesons agree at both forward and backward rapidity, showing no significant evidence of mass dependence. The differential cross sections of 𝜂 mesons are also used to calculate 𝜂/𝜋0 cross-section ratios, which show evidence of a deviation from the world average. These studies offer new constraints on mass-dependent nuclear effects in heavy-ion collisions, as well as 𝜂 and 𝜂′ meson fragmentation.