Search for: All records

ABSTRACT Dynamically crosslinked polymer networks, characterized by non‐permanent bonds, offer unique viscoelastic properties that can be used for various applications such as self‐healing coatings and reusable adhesives. This study investigates the spreading behavior of a silicone polymer network with dynamic imine bonds, focusing on the relationship between material properties and spreading dynamics. We prepare polydimethylsiloxane (PDMS) networks with varied rheological properties by adjusting the ratio of amine and aldehyde groups and curing conditions. The spreading of PDMS spherical drops is investigated on surfaces with different surface energies, with the process quantified by measuring the contact length and height over time. Our findings reveal that higher modulus spheres spread more slowly, and that the spreading length increases more on high energy surfaces. This research could provide insights for developing coatings and adhesives with tunable properties by studying the interaction between transiently‐crosslinked polymers and substrates during spreading. 

Phase separation dynamics of oil from swollen elastomers in a wetting ridge depends on oil viscosity and swelling ratio, which changes for early and late stages of wetting. 

In this review, we discuss the structural properties of the three most common types of silicone surfaces and their static and dynamic wetting properties. We review experimental and theoretical approaches for soft wetting. 

Abstract Utilizing colloidal probe, lateral force microscopy and simultaneous confocal microscopy, combined with finite element analysis, we investigate how a microparticle starts moving laterally on a soft, adhesive surface. We find that the surface can form a self-contacting crease at the leading front, which results from a buildup of compressive stress. Experimentally, creases are observed on substrates that exhibit either high or low adhesion when measured in the normal direction, motivating the use of simulations to consider the role of adhesion energy and interfacial strength. Our simulations illustrate that the interfacial strength plays a dominating role in the nucleation of a crease. After the crease forms, it progresses through the contact zone in a Schallamach wave-like fashion. Interestingly, our results suggest that this Schallamach wave-like motion is facilitated by free slip at the adhesive, self-contacting interface within the crease. 

Abstract Metal‐coordinated hydrogels can form a percolated network with transient bonds due to metal ions‐functional group coordination. Each metal ion can link with more than one ligand, leading to intricate speciation of bonding modes. While the mechanics of transient gels made with four‐arm polymers are often studied, less is known about how increasing the number of arms affects the modulus. Using shear rheology, the modulus of hydrogels prepared from four‐, six‐, and eight‐armed poly(ethylene glycols), functionalized with histidine ligands that complex with nickel (II) ions is measured. These gels have matched polymer wt.% and varied pH to compare their moduli. It is considered whether the modulus can be described by established polymer network models by calculating the speciation of metal‐coordinated cross‐links and then incorporating it into a phantom network prediction. This study finds that 1) increasing the number of polymer arms increases the modulus, 2) the phantom network allows reasonable modulus approximation for four‐arm and six‐arm gels, and 3) the modulus of eight‐arm gels exceeds the phantom network prediction. Since polymer cores act as chemical cross‐links and metal‐coordinated cross‐links form network strands, it is possible that increasing the number of metal‐coordinated linkages per molecule reinforces the chemical cross‐link at the polymer core. 

Abstract Network formation in elastomers with grafted side chains is investigated to understand the entanglement‐free nature of the bottlebrush architecture. Competition between elastically effective cross‐linkers and dangling side chains creates a unique environment where reaction kinetics and steric effects dictate network percolation. The evolving viscoelasticity of linear and bottlebrush networks with an equivalent number of cross‐linkers to backbones is measured during a catalytic curing reaction using time‐resolved rheology. The impact of reaction kinetics on network formation is addressed through the sol−gel transition by tuning catalyst concentration. Solidification falls into a rate‐limited regime where the modulus growth rate increases with increasing catalyst. The network formation process remains independent of the cure rate in the bottlebrush and linear systems. Side chains significantly decrease the fractal dimension of the critical gel cluster despite a comparable number of cross‐links. Time‐cure superposition is applied to quantify dynamics in the pre‐ and post‐gel states. The divergence of the shift factors around the gel point is independent of cure kinetics. The collapse of shift factors in the post‐gel region further suggests the universality of the network formation process. The approach to understanding internal structure development during processing will be critical as bottlebrush elastomers are utilized among a wide range of applications. 

Variable-pressure electron-beam lithography (VP-EBL) employs an ambient gas at subatmospheric pressures to reduce charging during electron-beam lithography. VP-EBL has been previously shown to eliminate pattern distortion and provide improved resolution when patterning poly(methyl methacrylate) (PMMA) on insulating substrates. However, it remains unknown how water vapor affects the contrast and clearing dose nor has the effect of water vapor on the negative-tone behavior of PMMA been studied. In addition, water vapor has recently been shown to alter the radiation chemistry of the VP-EBL process for Teflon AF. Such changes in radiation chemistry have not been explored for PMMA. In this work, VP-EBL was conducted on conductive substrates to study the effect of water vapor on PMMA patterning separately from the effects of charge dissipation. In addition, both positive and negative-tone processes were studied to determine the effect of water vapor on both chain scission and cross-linking. The contrast of PMMA was found to improve significantly with increasing water vapor pressure for both positive and negative-tone patterning. The clearing dose for positive-tone patterning increases moderately with vapor pressure as would be expected for electron scattering in a gas. However, the onset set dose for negative-tone patterning increased dramatically with pressure revealing a more significant change in the exposure mechanism. X-ray photoelectron spectra and infrared transmission spectra indicate that water vapor only slightly alters the composition of exposed PMMA. Also, electron scattering in water vapor yielded a much larger clear region around negative-tone patterns. This effect could be useful for increasing the range of the developed region around cross-linked PMMA beyond the backscattered electron range. Thus, VP-EBL for PMMA introduces a new means of tuning clearing/onset dose and contrast, while allowing additional control over the size of the cleared region around negative-tone patterns.