skip to main content
Explore Scholarly Publications and Datasets in the NSF-PAR

  • Home
  • Search Results
  • Page 1 of 9

Search for: All records

Creators/Authors contains: "Rauch, M."

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. ; ; ; ; ; ; ; ; ; ; et al ( , Monthly Notices of the Royal Astronomical Society)
    Full Text Available 
  2. ; ; ; ; ; ; ; ; ; ; et al ( , Journal of Instrumentation)
    Abstract The CMS Inner Tracker, made of silicon pixel modules, will be entirely replaced prior to the start of the High Luminosity LHC period. One of the crucial components of the new Inner Tracker system is the readout chip, being developed by the RD53 Collaboration, and in particular its analogue front-end, which receives the signal from the sensor and digitizes it. Three different analogue front-ends (Synchronous, Linear, and Differential) were designed and implemented in the RD53A demonstrator chip. A dedicated evaluation program was carried out to select the most suitable design to build a radiation tolerant pixel detector able tomore »sustain high particle rates with high efficiency and a small fraction of spurious pixel hits. The test results showed that all three analogue front-ends presented strong points, but also limitations. The Differential front-end demonstrated very low noise, but the threshold tuning became problematic after irradiation. Moreover, a saturation in the preamplifier feedback loop affected the return of the signal to baseline and thus increased the dead time. The Synchronous front-end showed very good timing performance, but also higher noise. For the Linear front-end all of the parameters were within specification, although this design had the largest time walk. This limitation was addressed and mitigated in an improved design. The analysis of the advantages and disadvantages of the three front-ends in the context of the CMS Inner Tracker operation requirements led to the selection of the improved design Linear front-end for integration in the final CMS readout chip.« less
    Free, publicly-accessible full text available December 1, 2022
  3. ; ; ; ; ; ; ; ; ; ; et al ( , Journal of High Energy Physics)
    A bstract The top quark pair production cross section is measured in proton-proton collisions at a center-of-mass energy of 5.02 TeV. The data were collected in a special LHC low-energy and low-intensity run in 2017, and correspond to an integrated luminosity of 302 pb − 1 . The measurement is performed using events with one electron and one muon of opposite charge, and at least two jets. The measured cross section is 60 . 7 ± 5 . 0 (stat) ± 2 . 8 (syst) ± 1 . 1 (lumi) pb. A combination with the result in the single leptonmore »+ jets channel, based on data collected in 2015 at the same center-of-mass energy and corresponding to an integrated luminosity of 27.4 pb − 1 , is then performed. The resulting measured value is 63 . 0 ± 4 . 1 (stat) ± 3 . 0 (syst+lumi) pb, in agreement with the standard model prediction of $$ {66.8}_{-3.1}^{+2.9} $$ 66.8 − 3.1 + 2.9 pb.« less
    Free, publicly-accessible full text available April 1, 2023
  4. ; ; ; ; ; ; ; ; ; ; et al ( , Journal of Instrumentation)
    Abstract During the operation of the CMS experiment at the High-Luminosity LHC the silicon sensors of the Phase-2 Outer Tracker will be exposed to radiation levels that could potentially deteriorate their performance. Previous studies had determined that planar float zone silicon with n-doped strips on a p-doped substrate was preferred over p-doped strips on an n-doped substrate. The last step in evaluating the optimal design for the mass production of about 200 m 2 of silicon sensors was to compare sensors of baseline thickness (about 300 μm) to thinned sensors (about 240 μm), which promised several benefits at high radiationmore »levels because of the higher electric fields at the same bias voltage. This study provides a direct comparison of these two thicknesses in terms of sensor characteristics as well as charge collection and hit efficiency for fluences up to 1.5 × 10 15 n eq /cm 2 . The measurement results demonstrate that sensors with about 300 μm thickness will ensure excellent tracking performance even at the highest considered fluence levels expected for the Phase-2 Outer Tracker.« less
    Free, publicly-accessible full text available November 1, 2022
  5. ; ; ; ; ; ; ; ; ; ; et al ( , Physical Review Letters)
    Free, publicly-accessible full text available March 1, 2023
  6. ; ; ; ; ; ; ; ; ; ; et al ( , Physical Review Letters)
    Free, publicly-accessible full text available January 1, 2023
  7. ; ; ; ; ; ; ; ; ; ; et al ( , Journal of High Energy Physics)
    A bstract A search for a heavy resonance decaying to a top quark and a W boson in the fully hadronic final state is presented. The analysis is performed using data from proton-proton collisions at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 137 fb − 1 recorded by the CMS experiment at the LHC. The search is focused on heavy resonances, where the decay products of each top quark or W boson are expected to be reconstructed as a single, large-radius jet with a distinct substructure. The production of an excited bottom quark, b *more », is used as a benchmark when setting limits on the cross section for a heavy resonance decaying to a top quark and a W boson. The hypotheses of b * quarks with left-handed, right-handed, and vector-like chiralities are excluded at 95% confidence level for masses below 2.6, 2.8, and 3.1 TeV, respectively. These are the most stringent limits on the b * quark mass to date, extending the previous best limits by almost a factor of two.« less
    Free, publicly-accessible full text available December 1, 2022
  8. ; ; ; ; ; ; ; ; ; ; et al ( , The European Physical Journal C)
    Abstract A combination of searches for top squark pair production using proton–proton collision data at a center-of-mass energy of 13 $$\,\text {Te}\text {V}$$ Te at the CERN LHC, corresponding to an integrated luminosity of 137 $$\,\text {fb}^{-1}$$ fb - 1 collected by the CMS experiment, is presented. Signatures with at least 2 jets and large missing transverse momentum are categorized into events with 0, 1, or 2 leptons. New results for regions of parameter space where the kinematical properties of top squark pair production and top quark pair production are very similar are presented. Depending on the model, the combinedmore »result excludes a top squark mass up to 1325 $$\,\text {Ge}\text {V}$$ Ge for a massless neutralino, and a neutralino mass up to 700 $$\,\text {Ge}\text {V}$$ Ge for a top squark mass of 1150 $$\,\text {Ge}\text {V}$$ Ge . Top squarks with masses from 145 to 295 $$\,\text {Ge}\text {V}$$ Ge , for neutralino masses from 0 to 100 $$\,\text {Ge}\text {V}$$ Ge , with a mass difference between the top squark and the neutralino in a window of 30 $$\,\text {Ge}\text {V}$$ Ge around the mass of the top quark, are excluded for the first time with CMS data. The results of theses searches are also interpreted in an alternative signal model of dark matter production via a spin-0 mediator in association with a top quark pair. Upper limits are set on the cross section for mediator particle masses of up to 420 $$\,\text {Ge}\text {V}$$ Ge .« less
    Free, publicly-accessible full text available November 1, 2022
  9. ; ; ; ; ; ; ; ; ; ; et al ( , Physical Review Letters)
    Free, publicly-accessible full text available September 1, 2022
  10. ; ; ; ; ; ; ; ; ; ; et al ( , Physical Review D)
    Free, publicly-accessible full text available September 1, 2022