skip to main content

Search for: All records

Creators/Authors contains: "Taylor, W."

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. This work presents a power amplifier (PA) linearization approach based on baseband feedback. The modulated signal envelope is fed back from the transistor's drain to its gate with an applied amplitude and phase shift selected to reduce the intermodulation distortion (IMD3) product at the output. The design targets IMD3 improvement near the PA's 1-dB compression point (P1dB), enabling linear operation at a higher output power level and therefore improved device periphery utilization and efficiency. This approach offers a potential linearization alternative to digital pre-distortion, which cannot be applied in some systems, without affecting the RF performance. The 850-MHz proof-of-concept prototype based on a 15-W GaN device is characterized with a two-tone measurement with 5-MHz spacing, and demonstrates 9-dB improvement of the lower IMD3 tone near the P1dB point.
  2. Over the last decade, the vector-apodizing phase plate (vAPP) coronagraph has been developed from concept to on-sky application in many high-contrast imaging systems on 8 m class telescopes. The vAPP is a geometric-phase patterned coronagraph that is inherently broadband, and its manufacturing is enabled only by direct-write technology for liquid-crystal patterns. The vAPP generates two coronagraphic point spread functions (PSFs) that cancel starlight on opposite sides of the PSF and have opposite circular polarization states. The efficiency, that is, the amount of light in these PSFs, depends on the retardance offset from a half-wave of the liquid-crystal retarder. Using different liquid-crystal recipes to tune the retardance, different vAPPs operate with high efficiencies (><#comment/>96%<#comment/>) in the visible and thermal infrared (0.55 µm to 5 µm). Since 2015, seven vAPPs have been installed in a total of six different instruments, including Magellan/MagAO, Magellan/MagAO-X, Subaru/SCExAO, and LBT/LMIRcam. Using two integral field spectrographs installed on the latter two instruments, these vAPPs can provide low-resolution spectra (R∼<#comment/>30) between 1 µm and 5 µm. We review the design process, development, commissioning, on-sky performance, and first scientific results of all commissioned vAPPs. We report on the lessons learned and conclude with perspectives for future developmentsmore »and applications.

    « less
  3. Abstract The accurate simulation of additional interactions at the ATLAS experiment for the analysis of proton–proton collisions delivered by the Large Hadron Collider presents a significant challenge to the computing resources. During the LHC Run 2 (2015–2018), there were up to 70 inelastic interactions per bunch crossing, which need to be accounted for in Monte Carlo (MC) production. In this document, a new method to account for these additional interactions in the simulation chain is described. Instead of sampling the inelastic interactions and adding their energy deposits to a hard-scatter interaction one-by-one, the inelastic interactions are presampled, independent of the hard scatter, and stored as combined events. Consequently, for each hard-scatter interaction, only one such presampled event needs to be added as part of the simulation chain. For the Run 2 simulation chain, with an average of 35 interactions per bunch crossing, this new method provides a substantial reduction in MC production CPU needs of around 20%, while reproducing the properties of the reconstructed quantities relevant for physics analyses with good accuracy.
    Free, publicly-accessible full text available December 1, 2023
  4. Abstract The ATLAS experiment at the Large Hadron Collider has a broad physics programme ranging from precision measurements to direct searches for new particles and new interactions, requiring ever larger and ever more accurate datasets of simulated Monte Carlo events. Detector simulation with Geant4 is accurate but requires significant CPU resources. Over the past decade, ATLAS has developed and utilized tools that replace the most CPU-intensive component of the simulation—the calorimeter shower simulation—with faster simulation methods. Here, AtlFast3, the next generation of high-accuracy fast simulation in ATLAS, is introduced. AtlFast3 combines parameterized approaches with machine-learning techniques and is deployed to meet current and future computing challenges, and simulation needs of the ATLAS experiment. With highly accurate performance and significantly improved modelling of substructure within jets, AtlFast3 can simulate large numbers of events for a wide range of physics processes.
    Free, publicly-accessible full text available December 1, 2023
  5. A bstract Measurements of the production cross-sections of the Standard Model (SM) Higgs boson ( H ) decaying into a pair of τ -leptons are presented. The measurements use data collected with the ATLAS detector from pp collisions produced at the Large Hadron Collider at a centre-of-mass energy of $$ \sqrt{s} $$ s = 13 TeV, corresponding to an integrated luminosity of 139 fb − 1 . Leptonic ( τ → ℓν ℓ ν τ ) and hadronic ( τ → hadrons ν τ ) decays of the τ -lepton are considered. All measurements account for the branching ratio of H → ττ and are performed with a requirement |y H | < 2 . 5, where y H is the true Higgs boson rapidity. The cross-section of the pp → H → ττ process is measured to be 2 . 94 ± $$ 0.21{\left(\mathrm{stat}\right)}_{-0.32}^{+0.37} $$ 0.21 stat − 0.32 + 0.37 (syst) pb, in agreement with the SM prediction of 3 . 17 ± 0 . 09 pb. Inclusive cross-sections are determined separately for the four dominant production modes: 2 . 65 ± $$ 0.41{\left(\mathrm{stat}\right)}_{-0.67}^{+0.91} $$ 0.41 stat − 0.67 + 0.91 (syst) pb for gluon-gluon fusion, 0 .more »197 ± $$ 0.028{\left(\mathrm{stat}\right)}_{-0.026}^{+0.032} $$ 0.028 stat − 0.026 + 0.032 (syst) pb for vector-boson fusion, 0 . 115 ± $$ 0.058{\left(\mathrm{stat}\right)}_{-0.040}^{+0.042} $$ 0.058 stat − 0.040 + 0.042 (syst) pb for vector-boson associated production, and 0 . 033 ± $$ 0.031{\left(\mathrm{stat}\right)}_{-0.017}^{+0.022} $$ 0.031 stat − 0.017 + 0.022 (syst) pb for top-quark pair associated production. Measurements in exclusive regions of the phase space, using the simplified template cross-section framework, are also performed. All results are in agreement with the SM predictions.« less
    Free, publicly-accessible full text available August 1, 2023