Search for: All records

A<sc>bstract</sc> Differential cross sections for top quark pair ($$ \textrm{t}\overline{\textrm{t}} $$ $t\overline{t}$) production are measured in proton-proton collisions at a center-of-mass energy of 13 TeV using a sample of events containing two oppositely charged leptons. The data were recorded with the CMS detector at the CERN Large Hadron Collider and correspond to an integrated luminosity of 138 fb⁻¹. The differential cross sections are measured as functions of kinematic observables of the$$ \textrm{t}\overline{\textrm{t}} $$ $t\overline{t}$system, the top quark and antiquark and their decay products, as well as of the number of additional jets in the event. The results are presented as functions of up to three variables and are corrected to the parton and particle levels. When compared to standard model predictions based on quantum chromodynamics at different levels of accuracy, it is found that the calculations do not always describe the observed data. The deviations are found to be largest for the multi-differential cross sections. 

Abstract The Large Hadron Collider at CERN will undergo an upgrade in order to increase its luminosity to 7.5 × 10³⁴cm^-2s^-1. The increased luminosity during this High-Luminosity running phase, starting around 2029, means a higher rate of proton-proton interactions, hence a larger ionizing dose and particle fluence for the detectors. The current tracking system of the CMS experiment will be fully replaced in order to cope with the new operating conditions. Prototype planar pixel sensors for the CMS Inner Tracker with square 50 μm × 50 μm and rectangular 100 μm × 25 μm pixels read out by the RD53A chip were characterized in the lab and at the DESY-II testbeam facility in order to identify designs that meet the requirements of CMS during the High-Luminosity running phase. A spatial resolution of approximately 3.4 μm (2 μm) is obtained using the modules with 50 μm × 50 μm (100 μm × 25 μm) pixels at the optimal angle of incidence before irradiation. After irradiation to a 1 MeV neutron equivalent fluence of Φ_eq = 5.3 × 10¹⁵ cm^-2, a resolution of 9.4 μm is achieved at a bias voltage of 800 V using a module with 50 μm × 50 μm pixel size. All modules retain a hit efficiency in excess of 99% after irradiation to fluences up to 2.1 × 10¹⁶ cm^-2. Further studies of the electrical properties of the modules, especially crosstalk, are also presented in this paper. 

Differential cross sections are measured for the standard model Higgs boson produced in association with vector bosons ( $W$, $Z$) and decaying to a pair of $b$quarks. Measurements are performed within the framework of the simplified template cross sections. The analysis relies on the leptonic decays of the $W$and $Z$bosons, resulting in final states with 0, 1, or 2 electrons or muons. The Higgs boson candidates are either reconstructed from pairs of resolved $b$-tagged jets, or from single large-radius jets containing the particles arising from two $b$quarks. Proton-proton collision data at $\sqrt{s}=13\mathrm{TeV}$, collected by the CMS experiment in 2016–2018 and corresponding to a total integrated luminosity of $138{\mathrm{fb}}^{-1}$, are analyzed. The inclusive signal strength, defined as the product of the observed production cross section and branching fraction relative to the standard model expectation, combining all analysis categories, is found to be $\mu =1.15_{-0.20}^{+0.22}$. This corresponds to an observed (expected) significance of 6.3 (5.6) standard deviations. © 2024 CERN, for the CMS Collaboration2024CERN 

Abstract The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5–7.5×10 34 cm -2 s -1 . This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000–4000 fb -1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV. To cope with these challenging environmental conditions, the strip tracker of the CMS experiment will be upgraded using modules with two closely-spaced silicon sensors to provide information to include tracking in the Level-1 trigger selection. This paper describes the performance, in a test beam experiment, of the first prototype module based on the final version of the CMS Binary Chip front-end ASIC before and after the module was irradiated with neutrons. Results demonstrate that the prototype module satisfies the requirements, providing efficient tracking information, after being irradiated with a total fluence comparable to the one expected through the lifetime of the experiment. 

Abstract A description is presented of the algorithms used to reconstruct energy deposited in the CMS hadron calorimeter during Run 2 (2015–2018) of the LHC. During Run 2, the characteristic bunch-crossing spacing for proton-proton collisions was 25 ns, which resulted in overlapping signals from adjacent crossings. The energy corresponding to a particular bunch crossing of interest is estimated using the known pulse shapes of energy depositions in the calorimeter, which are measured as functions of both energy and time. A variety of algorithms were developed to mitigate the effects of adjacent bunch crossings on local energy reconstruction in the hadron calorimeter in Run 2, and their performance is compared. 

A<sc>bstract</sc> The second-order (v₂) and third-order (v₃) Fourier coefficients describing the azimuthal anisotropy of prompt and nonprompt (from b-hadron decays) J/ψ, as well as prompt ψ(2S) mesons are measured in lead-lead collisions at a center-of-mass energy per nucleon pair of$$ \sqrt{s_{\textrm{NN}}} $$ $\sqrt{s_{\mathrm{NN}}}$= 5.02 TeV. The analysis uses a data set corresponding to an integrated luminosity of 1.61 nb⁻¹recorded with the CMS detector. The J/ψ and ψ(2S) mesons are reconstructed using their dimuon decay channel. Thev₂andv₃coefficients are extracted using the scalar product method and studied as functions of meson transverse momentum and collision centrality. The measuredv₂values for prompt J/ψ mesons are found to be larger than those for nonprompt J/ψ mesons. The prompt J/ψv₂values at highp_Tare found to be underpredicted by a model incorporating only parton energy loss effects in a quark-gluon plasma medium. Prompt and nonprompt J/ψ mesonv₃and prompt ψ(2S)v₂andv₃values are also reported for the first time, providing new information about heavy quark interactions in the hot and dense medium created in heavy ion collisions. 

A bstract The path-length dependent parton energy loss within the dense partonic medium created in lead-lead collisions at a nucleon-nucleon center-of-mass energy of $$ \sqrt{s_{\textrm{NN}}} $$ s NN = 5 . 02 TeV is studied by determining the azimuthal anisotropies for dijets with high transverse momentum. The data were collected by the CMS experiment in 2018 and correspond to an integrated luminosity of 1.69 nb − 1 . For events containing back-to-back jets, correlations in relative azimuthal angle and pseudorapidity ( η ) between jets and hadrons, and between two hadrons, are constructed. The anisotropies are expressed as the Fourier expansion coefficients v n , n = 2–4 of these azimuthal distributions. The dijet v n values are extracted from long-range (1 . 5 < |∆ η | < 2 . 5) components of these correlations, which suppresses the background contributions from jet fragmentation processes. Positive dijet v 2 values are observed which increase from central to more peripheral events, while the v 3 and v 4 values are consistent with zero within experimental uncertainties. 

Abstract The Short Strip ASIC (SSA) is one of the four front-end chips designed for the upgrade of the CMS Outer Tracker for the High Luminosity LHC. Together with the Macro-Pixel ASIC (MPA) it will instrument modules containing a strip and a macro-pixel sensor stacked on top of each other. The SSA provides both full readout of the strip hit information when triggered, and, together with the MPA, correlated clusters called stubs from the two sensors for use by the CMS Level-1 (L1) trigger system. Results from the first prototype module consisting of a sensor and two SSA chips are presented. The prototype module has been characterized at the Fermilab Test Beam Facility using a 120 GeV proton beam. 

A bstract A search for the pair production of the lightest supersymmetric partner of the top quark, the top squark ( $$ {\overset{\sim }{\textrm{t}}}_1 $$ t ~ 1 ), is presented. The search targets the four-body decay of the $$ {\overset{\sim }{\textrm{t}}}_1 $$ t ~ 1 , which is preferred when the mass difference between the top squark and the lightest supersymmetric particle is smaller than the mass of the W boson. This decay mode consists of a bottom quark, two other fermions, and the lightest neutralino ( $$ {\overset{\sim }{\chi}}_1^0 $$ χ ~ 1 0 ), which is assumed to be the lightest supersymmetric particle. The data correspond to an integrated luminosity of 138 fb − 1 of proton-proton collisions at a center-of-mass energy of 13 TeV collected by the CMS experiment at the CERN LHC. Events are selected using the presence of a high-momentum jet, an electron or muon with low transverse momentum, and a significant missing transverse momentum. The signal is selected based on a multivariate approach that is optimized for the difference between m ( $$ {\overset{\sim }{\textrm{t}}}_1 $$ t ~ 1 ) and m ( $$ {\overset{\sim }{\chi}}_1^0 $$ χ ~ 1 0 ). The contribution from leading background processes is estimated from data. No significant excess is observed above the expectation from standard model processes. The results of this search exclude top squarks at 95% confidence level for masses up to 480 and 700 GeV for m ( $$ {\overset{\sim }{\textrm{t}}}_1 $$ t ~ 1 ) − m ( $$ {\overset{\sim }{\chi}}_1^0 $$ χ ~ 1 0 ) = 10 and 80 GeV, respectively.