Search for: All records

Aquaporins are water channel proteins in cell membrane, highly specific for water molecules while restricting the passage of contaminants and small molecules, such as urea and boric acid. Cysteine functional groups were installed on aquaporin Z for covalent attachment to the polymer membrane matrix so that the proteins could be immobilized to the membranes and aligned in the direction of the flow. Depth profiling using x-ray photoelectron spectrometer (XPS) analysis showed the presence of functional groups corresponding to aquaporin Z modified with cysteine (Aqp-SH). Aqp-SH modified membranes showed a higher salt rejection as compared to unmodified membranes. For 2 M NaCl and CaCl2 solutions, the rejection obtained from Aqp-SH membranes was 49.3 ± 7.5% and 59.1 ± 5.1%. On the other hand, the rejections obtained for 2 M NaCl and CaCl2 solutions from unmodified membranes were 0.8 ± 0.4% and 1.3 ± 0.2% respectively. Furthermore, Aqp-SH membranes did not show a significant decrease in salt rejection with increasing feed concentrations, as was observed with other membranes. Through simulation studies, it was determined that there was approximately 24% capping of membrane pores by dispersed aquaporins. 

Various types of channel proteins, broadly named porins, present in the cell membrane of gram‐negative bacteria have specific functionalities depending on their selectivity toward different nutrients or toward water. The high selectivity of porins has led to their incorporation into synthetic systems, in a field called biomimetics. An example is the addition of water channel proteins, or aquaporins, to polymeric separations membranes in order to enhance their performance in terms of selectivity and permeability. The concept of incorporating aquaporins into synthetic membranes has been studied for the last 10 years; however, there are still limitations such as costs, alignment into the membrane assembly, and scalability of membrane fabrication. Therefore, in recent years, there has been an increase in the study of synthesizing molecules with similar structure–function relationships of porins. These artificial channels attempt to mimic the biological porins, while being synthesized using simpler chemistry, being solvent compatible, and requiring less space on the membrane surface which helps to incorporate more channels into the membrane assembly. In summary, the future of biomimetic and bioinspired membranes depends on the design strategies, level of nature imitation, and the performance of these systems on a commercial scale. © 2019 American Institute of Chemical Engineers Environ Prog, 38:e13215, 2019

 

Functional polymers or copolymers have been added to separations membranes by incorporating them in the membrane dope prior to casting, byin situpolymerization, and by postsynthesis surface modification of existing membranes. Here, a postsynthesis membrane functionalization that targeted decreasing the molecular weight cutoff (MWCO) and increasing the hydrophilicity without significantly decreasing the operating flux was studied. Hybrid bisamide molecules with added amine and carboxylic acid functionalities as end groups were synthesized to form a selective layer on membrane surface via covalent attachment to the membrane. Fourier transform infrared spectroscopy analysis showed the functional groups corresponding to bisamide molecules were present on modified membranes. Furthermore, modified membranes displayed MWCO of 400 Da as compared to 1000 Da MWCO of unmodified membranes, along with an increase in the hydrophilicity of modified membranes. Modified membranes showed an improvement in divalent salt rejection and percent flux recovered after reverse‐flow filtration as compared to unmodified membranes. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2020,137, 48327.