skip to main content


Search for: All records

Creators/Authors contains: "Walter, Michael J."

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. Fe2O3produced in a deep magma ocean in equilibrium with core-destined alloy sets the early redox budget and atmospheric composition of terrestrial planets. Previous experiments (≤28 gigapascals) and first-principles calculations indicate that a deep terrestrial magma ocean produces appreciable Fe3+but predict Fe3+/ΣFe ratios that conflict by an order of magnitude. We present Fe3+/ΣFe of glasses quenched from melts equilibrated with Fe alloy at 38 to 71 gigapascals, 3600 to 4400 kelvin, analyzed by synchrotron Mössbauer spectroscopy. These indicate Fe3+/ΣFe of 0.056 to 0.112 in a terrestrial magma ocean with mean alloy-silicate equilibration pressures of 28 to 53 gigapascals, producing sufficient Fe2O3to account for the modern bulk silicate Earth redox budget and surficial conditions near or more oxidizing than the iron-wüstite buffer, which would stabilize a primitive CO- and H2O-rich atmosphere.

     
    more » « less
    Free, publicly-accessible full text available October 18, 2025
  2. In the current plate tectonic regime, thermal modeling, petrology, and seismology show that subsurface portions of cold slabs carry some of their volatiles into the deep upper mantle, mantle transition zone, and uppermost lower mantle avoiding the devolatilization occurring with normal arc and wedge subduction. Slab crustal remnants at these depths can melt by intersecting their carbonated solidus whereas slab mantle remnants can devolatilize by warming and metamorphosing to ‘dryer’ mineral assemblages. Since fluid release and earthquake production (“dehydration embrittlement”) operates down to ~300 km depths in all subduction zones, we propose, that deep-focus earthquakes trace the places of fluid release at deeper levels (350 to 750 km). Fluids in faults related to earthquake generation will become diamond-forming as they react with mantle rocks along the fault walls. Diamonds thus formed will record deformation produced by mantle convection and slab buckling during mantle storage. Lithospheric diamonds, stored in static ancient continental keels, lack the connection to this type of geodynamic regime that is evident for sublithospheric diamonds. However, a comparison between the two diamond types suggests a geologic model for lithospheric diamond formation in the ancient past. Lithospheric diamonds and sublithospheric diamonds both contain evidence for the recycling of sediments or surficial rocks that have equilibrated at low temperatures with seawater. The known way to inject these materials into diamond-forming regions is slab subduction. Hence both diamond types may have formed by variants of this same process that differ in depth and style over geologic time. Lithospheric diamonds are different from sublithospheric diamonds in critical ways: higher average N content, ages extending into the Paleoarchean, inclusion assemblages indicating formation at lower pressure, and lack of ubiquitous deformation features. Nitrogen content is the key to relating lithospheric diamonds to the subducting slab. Nitrogen occurs in clays and sediments at the slab surface or uppermost crust. Regardless of whether the slab is hot or cold during subduction, nitrogen will be removed into a mantle wedge if one exists. Additionally, diamonds will not survive in the melts/fluids generated in the wedge under oxidizing conditions. For sublithospheric diamonds, their low to non-existent nitrogen content occurs because they are derived from slab fluids/melts once nitrogen has been largely removed or from rocks deeper in the slab where nitrogen is scarce. The much higher nitrogen in lithospheric diamonds suggests that they formed from fluids/melts derived near the slab surface that contained N. In the Archean, such slabs must have subducted close to the nascent mantle keel with no mantle wedge so the fluids could be directly reduced by the mantle keel. We propose a gradual temporal change from shallow, keel-adjacent, mantle-wedge-poor subduction that produced lithospheric diamonds starting in the Paleoarchean to wedge-avoiding, cold and deep subduction that produced sublithospheric diamonds in the Paleozoic. This temporal change is consistent with many geologic features: an early stagnant lid and a buoyant Archean oceanic lithosphere; the slab-imbrication, advective thickening, and diamond-richness of portions of mantle keels; and anomalously diamond-rich ancient eclogites. 
    more » « less
    Free, publicly-accessible full text available July 1, 2025
  3. Abstract

    The relative roles of protoplanetary differentiation versus late accretion in establishing Earth’s life-essential volatile element inventory are being hotly debated. To address this issue, we employ first-principles calculations to investigate nitrogen (N) isotope fractionation during Earth’s accretion and differentiation. We find that segregation of an iron core would enrich heavy N isotopes in the residual silicate, while evaporation within a H2-dominated nebular gas produces an enrichment of light N isotope in the planetesimals. The combined effect of early planetesimal evaporation followed by core formation enriches the bulk silicate Earth in light N isotopes. If Earth is comprised primarily of enstatite-chondrite-like material, as indicated by other isotope systems, then late accretion of carbonaceous-chondrite-like material must contribute ~ 30–100% of the N budget in present-day bulk silicate Earth. However, mass balance using N isotope constraints shows that the late veneer contributes only a limited amount of other volatile elements (e.g., H, S, and C) to Earth.

     
    more » « less
    Free, publicly-accessible full text available May 16, 2025
  4. Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. To extend such measurements to hundreds of GPa pressure, pulsed heating methods have recently been integrated with diamond anvil cells. The recent design used a low-side switch and active electrical sensing equipment that was prone to damage and measurement error. Here, we report the design and characterization of new electronics that use a high-side switch and robust, passive electrical sensing equipment. The new pulse amplifier can heat ∼5 to 50 μm diameter metal wires to thousands of kelvin at tens to hundreds of GPa using diamond anvil cells. Pulse durations and peak currents can each be varied over three orders of magnitude, from 5 µs to 10 ms and from 0.2 to 200 A. The pulse amplifier is integrated with a current probe. Two voltage probes attached to the body of a diamond anvil cell are used to measure voltage in a four-point probe geometry. The accuracy of four-point probe resistance measurements for a dummy sample with 0.1 Ω resistance is typically better than 5% at all times from 2 µs to 10 ms after the beginning of the pulse. 
    more » « less
    Free, publicly-accessible full text available May 1, 2025
  5. When diamond anvil cell (DAC) sample chambers are outfitted with both thermal insulation and electrodes, two cutting-edge experimental methods are enabled: Joule heating with spectroradiometric temperature measurement and electrical resistance measurements of samples heated to thousands of kelvin. The accuracy of temperature and resistance measurements, however, often suffers from poor control of the shape and location of the sample, electrodes, and thermal insulation. Here, we present a recipe for the reproducible and precise fabrication of DAC sample, electrodes, and thermal insulation using a three-layer microassembly. The microassembly contains two potassium chloride thermal insulation layers, four electrical leads, a sample, and a buttressing layer made of polycrystalline alumina. The sample, innermost electrodes, and buttress layer are fabricated by focused-ion-beam milling. Three iron samples are presented as proof of concept. Each is successfully compressed and pulsed Joule heated while maintaining a four-point probe configuration. The highest pressure-temperature condition achieved is ∼150 GPa and 4000 K.

     
    more » « less
    Free, publicly-accessible full text available March 7, 2025
  6. Accurate and precise measurements of spectroradiometric temperature are crucial for many high pressure experiments that use diamond anvil cells or shock waves. In experiments with sub-millisecond timescales, specialized detectors such as streak cameras or photomultiplier tubes are required to measure temperature. High accuracy and precision are difficult to attain, especially at temperatures below 3000 K. Here, we present a new spectroradiometry system based on multianode photomultiplier tube technology and passive readout circuitry that yields a 0.24 µs rise-time for each channel. Temperature is measured using five color spectroradiometry. During high pressure pulsed Joule heating experiments in a diamond anvil cell, we document measurement precision to be ±30 K at temperatures as low as 2000 K during single-shot heating experiments with 0.6 µs time-resolution. Ambient pressure melting tests using pulsed Joule heating indicate that the accuracy is ±80 K in the temperature range 1800–2700 K. 
    more » « less
    Free, publicly-accessible full text available February 1, 2025
  7. Holden Thorp, Ali Shilatifard (Ed.)

    The origin of Earth’s volatile elements is highly debated. Comparing the chalcogen isotope ratios in the bulk silicate Earth (BSE) to those of its possible building blocks, chondritic meteorites, allows constraints on the origin of Earth’s volatiles; however, these comparisons are complicated by potential isotopic fractionation during protoplanetary differentiation, which largely remains poorly understood. Using first-principles calculations, we find that core-mantle differentiation does not notably fractionate selenium and tellurium isotopes, while equilibrium evaporation from early planetesimals would enrich selenium and tellurium in heavy isotopes in the BSE. The sulfur, selenium, and tellurium isotopic signatures of the BSE reveal that protoplanetary differentiation plays a key role in establishing most of Earth’s volatile elements, and a late veneer does not substantially contribute to the BSE’s volatile inventory.

     
    more » « less
  8. Abstract

    Characterizing compositional heterogeneity in Earth’s lower mantle is critical to understanding its dynamics. Three low-nitrogen diamonds from Koffiefontein (South Africa), containing inclusion assemblages of ferropericlase ± orthopyroxene ± magnesite, constrain diamond formation in an Mg-rich lower-mantle environment. Ferropericlase inclusions have Mg# 82.7–88.5 and orthopyroxene inclusions (retrogressed bridgmanite) have Mg# 95.0–95.1 and mantle-like δ18O of +5.6‰ ± 0.2‰. Magnesite included in one diamond implicates carbonated fluids in diamond formation. High Mg# and low Ca, Al, and Na of the assemblage indicate a melt-depleted meta-harzburgitic environment, in contrast to more fertile compositions expected for primitive lower mantle. Extremely low Ca in orthopyroxene inclusions may reflect a combination of melt depletion and low equilibration temperatures at the time of trapping. Inclusion compositions implicate subducted oceanic slab meta-harzburgite as the host for diamond growth. Mantle-like δ18O of the orthopyroxene inclusions indicates unaltered oceanic lithosphere. Similar melt-depleted characteristics in lower-mantle inclusion assemblages worldwide support that meta-harzburgite is the dominant host of lower-mantle diamonds.

     
    more » « less
  9. Abstract

    Minerals are information-rich materials that offer researchers a glimpse into the evolution of planetary bodies. Thus, it is important to extract, analyze, and interpret this abundance of information to improve our understanding of the planetary bodies in our solar system and the role our planet’s geosphere played in the origin and evolution of life. Over the past several decades, data-driven efforts in mineralogy have seen a gradual increase. The development and application of data science and analytics methods to mineralogy, while extremely promising, has also been somewhat ad hoc in nature. To systematize and synthesize the direction of these efforts, we introduce the concept of “Mineral Informatics,” which is the next frontier for researchers working with mineral data. In this paper, we present our vision for Mineral Informatics and the X-Informatics underpinnings that led to its conception, as well as the needs, challenges, opportunities, and future directions of the field. The intention of this paper is not to create a new specific field or a sub-field as a separate silo, but to document the needs of researchers studying minerals in various contexts and fields of study, to demonstrate how the systemization and enhanced access to mineralogical data will increase cross- and interdisciplinary studies, and how data science and informatics methods are a key next step in integrative mineralogical studies.

     
    more » « less
  10. Abstract

    Subduction related to the ancient supercontinent cycle is poorly constrained by mantle samples. Sublithospheric diamond crystallization records the release of melts from subducting oceanic lithosphere at 300–700 km depths1,2and is especially suited to tracking the timing and effects of deep mantle processes on supercontinents. Here we show that four isotope systems (Rb–Sr, Sm–Nd, U–Pb and Re–Os) applied to Fe-sulfide and CaSiO3inclusions within 13 sublithospheric diamonds from Juína (Brazil) and Kankan (Guinea) give broadly overlapping crystallization ages from around 450 to 650 million years ago. The intracratonic location of the diamond deposits on Gondwana and the ages, initial isotopic ratios, and trace element content of the inclusions indicate formation from a peri-Gondwanan subduction system. Preservation of these Neoproterozoic–Palaeozoic sublithospheric diamonds beneath Gondwana until its Cretaceous breakup, coupled with majorite geobarometry3,4, suggests that they accreted to and were retained in the lithospheric keel for more than 300 Myr during supercontinent migration. We propose that this process of lithosphere growth—with diamonds attached to the supercontinent keel by the diapiric uprise of depleted buoyant material and pieces of slab crust—could have enhanced supercontinent stability.

     
    more » « less