In this study, a novel fabrication process, to the best of our knowledge, was developed to fabricate a glass harmonic diffractive lens. In this process, a polymethylmethacrylate master of the diffractive lens was machined using single-point diamond turning. Then an electrolytic plating process was conducted to grow a reverse nickel (Ni) mold. Precision compression molding was performed using the Ni mold to replicate the diffractive lens structures onto a glass surface. Surface measurements and optical testing show that the replicated diffractive lenses by the proposed method have high tolerances and require optical performance, demonstrating a high-volume, high-precision, and cost-effective process. The proposed method will be critical for consumer products where glass optics are increasingly used in lens assemblies.
Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
-
-
Fresnel lens arrays are widely employed in concentrator photovoltaics, photonic devices, and integral imaging systems. In this study, a rapid non-isothermal imprinting process for Fresnel lens arrays was proposed. In this process, a heated mold with microstructures was momentarily pressed onto a thermoplastic polymer surface that was initially kept at room temperature. The microstructures of the mold can be copied completely to the polymer substrate by imprinting consecutively until a continuous surface Fresnel lens array is obtained. Different from more traditional molding processes, the substrate does not need to be heated and cooled repeatedly in the replicating process. In addition, the imprinting process is carried out at room temperature, which can greatly reduce the thermal cycle time and energy consumption. Generally speaking, the material flow and stress distribution of the substrate need to be monitored so that the microlenses with a high precision surface finish can be produced in the non-isothermal imprinting process. To verify this, the finite element method (FEM) model for the non-isothermal process was established, and the feasibility of this process was analyzed. A hexagonal continuous surface Fresnel lens array was then fabricated, and its geometrical contour and imaging performance were tested. The experimental results showed this new process could be an effective and low-cost optical fabrication technology for high-quality production of Fresnel lens arrays.
-
The majority of optical lenses have spherical surface profiles because they are convenient to fabricate. Replacing spherical optics with aspheric optics leads to smaller size, lighter weight, and less complicated optical systems with a superior imaging quality. However, fabrication of aspheric lenses is expensive and time-consuming. Here, we introduce a straightforward and low-cost casting method to fabricate polymeric aspheric lenses. An elastomeric ferrogel was formed into an aspherical profile by using a designed magnetic field and then was used as a mold. Different types of aspherical profiles from parabola to hyperbola can be formed with this method by tuning the magnetic field. A home-built Shack–Hartmann sensor was employed to characterize the cast polymeric lenses. The effects of magnetic field intensity, gradient of the magnetic field, and magnetic susceptibility of the ferrogel on the lens profiles were investigated. This technique can be used for rapid-forming polymeric aspherical lenses with different sizes and shapes.