Search for: All records

The placement of SMD components is usually performed with Cartesian type robots, a task known as pick-and-place (P&P). Small Selective Compliance Articulated Robot Arm (SCARA) robots are also growing in popularity for this use because of their quick and accurate performance. This paper describes the use of the Lean Robotic Micromanufacturing (LRM) framework applied on a large, 10kg payload, industrial SCARA robot for PCB assembly. The LRM framework guided the precision evaluation of the PCB assembly process and provided a prediction of the placement precision and yield. We experimentally evaluated the repeatability of the system, as well as the resulting collective errors during the assembly. Results confirm that the P&P task can achieve the required assembly tolerance of 200 microns without employing closed-loop visual servoing, therefore considerably decreasing the system complexity and assembly time.

 

Enhancing physical human-robot interaction requires the improvement in the tactile perception of physical touch. Robot skin sensors exhibiting piezoresistive behavior can be used in conjunction with collaborative robots. In past work, fabrication of these tactile arrays was done using cleanroom techniques such as spin coating, photolithography, sputtering, wet and dry etching onto flexible polymers. In this paper, we present an addictive, non-cleanroom improved process of depositing PEDOT: PSS, which is the organic polymer responsible for the piezoresistive phenomenon of the robot skin sensor arrays. This publication details the patterning of the robot skin sensor structures and the adaptation of the inkjet printing technology to the fabrication process. This increases the possibility of scaling the production output while reducing the cleanroom fabrication cost and time from an approximately five-hour PEDOT: PSS deposition process to five minutes. Furthermore, the testing of these skin sensor arrays is carried out on a testing station equipped with a force plunger and an integrated circuit designed to provide perception feedback on various force load profiles controlled in an automated process. The results show uniform deposition of the PEDOT: PSS, consistent resistance measurement, and appropriate tactile response across an array of 16 sensors.

 

The sAFAM is a novel mm-size microrobot built using MicroElectroMechanical Systems (MEMS) technology. It consists of a monolithically fabricated microrobotic arm assembled onto four in-plane actuators, capable of moving along four degrees of freedom, including translational movement in X and Y axes as well as pitch and yaw. In this paper, several design modifications were proposed to increase movement precision, stability, and controllability to the sAFAM tip. An interface is developed to assist a human operator accurately position the microrobot tip during nano-object handling. A Python-based graphical user interface (GUI) was programmed to make it intuitive for an operator to use and obtain required tip precision under a microscope. Experimental results demonstrate the functionality of the proposed control solution, and the tip motion resolution using microscope images of the microrobot tip under 20x magnification during operation. The hardware and software requirements for the proposed experimental setup and control platform are discussed in detail. 

Industrial robots, as mature and high-efficient equipment, have been applied to various fields, such as vehicle manufacturing, product packaging, painting, welding, and medical surgery. Most industrial robots are only operating in their own workspace, in other words, they are floor-mounted at the fixed locations. Just some industrial robots are wall-mounted on one linear rail based on the applications. Sometimes, industrial robots are ceiling-mounted on an X-Y gantry to perform upside-down manipulation tasks. The main objective of this paper is to describe the NeXus, a custom robotic system that has been designed for precision microsystem integration tasks with such a gantry. The system tasks include assembly, bonding, and 3D printing of sensor arrays, solar cells, and microrobotic prototypes. The NeXus consists of a custom designed frame, providing structural rigidity, a large overhead X-Y gantry carrying a 6 degrees of freedom industrial robot, and several other precision positioners and processes. We focus here on the design and precision evaluation of the overhead ceiling-mounted industrial robot of NeXus and its supporting frame. We first simulated the behavior of the frame using Finite Element Analysis (FEA), then experimentally evaluated the pose repeatability of the robot end-effector using three different types of sensors. Results verify that the performance objectives of the design are achieved. 

In this paper, we propose a method for tracking a microrobot’s three-dimensional position using microscope machine vision. The microrobot, theSolid Articulated Four Axis Microrobot (sAFAM), is being developed to enable the assembly and manipulation of micro and nanoscale objects. In the future, arrays of sAFAMS working together can be integrated into a wafer-scale nanofactory, Prior to use, microrobots in this microfactory need calibration, which can be achieved using the proposed measurement technique. Our approach enables faster and more accurate mapping of microrobot translations and rotations, and orders of magnitude larger datasets can be created by automation. Cameras feeds on a custom microscopy system is fed into a data processing pipeline that enables tracking of the microrobot in real-time. This particular machine vision method was implemented with a help of OpenCV and Python and can be used to track the movement of other micrometer-sized features. Additionally, a script was created to enable automated repeatability tests for each of the six trajectories traversable by the robot. A more precise microrobot workable area was also determined thanks to the significantly larger datasets enabled by the combined automation and machine vision approaches. Keywords: Micro robotics, machine vision, nano microscale manufacturing.