Search for: All records

Low temperature synthesis of high quality two-dimensional (2D) materials directly on flexible substrates remains a fundamental limitation towards scalable realization of robust flexible electronics possessing the unique physical properties of atomically thin structures. Herein, we describe room temperature sputtering of uniform, stoichiometric amorphous MoS 2 and subsequent large area (>6.25 cm 2 ) photonic crystallization of 5 nm 2H-MoS 2 films in air to enable direct, scalable fabrication of ultrathin 2D photodetectors on stretchable polydimethylsiloxane (PDMS) substrates. The lateral photodetector devices demonstrate an average responsivity of 2.52 μW A −1 and a minimum response time of 120 ms under 515.6 nm illumination. Additionally, the surface wrinkled, or buckled, PDMS substrate with conformal MoS 2 retained the photoconductive behavior at tensile strains as high as 5.72% and over 1000 stretching cycles. The results indicate that the photonic crystallization method provides a significant advancement in incorporating high quality semiconducting 2D materials applied directly on polymer substrates for wearable and flexible electronic systems. 

Chemical sensors based on solution‐processed 2D nanomaterials represent an extremely attractive approach toward scalable and low‐cost devices. Through the implementation of real‐time impedance spectroscopy and development of a three‐element circuit model, redox exfoliated MoS₂nanoflakes demonstrate an ultrasensitive empirical detection limit of NO₂gas at 1 ppb, with an extrapolated ultimate detection limit approaching 63 ppt. This sensor construct reveals a more than three orders of magnitude improvement from conventional direct current sensing approaches as the traditionally dominant interflake interactions are bypassed in favor of selectively extracting intraflake doping effects. This same approach allows for an all solution‐processed, flexible 2D sensor to be fabricated on a polyimide substrate using a combination of graphene contacts and drop‐casted MoS₂nanoflakes, exhibiting similar sensitivity limits. Finally, a thermal annealing strategy is used to explore the tunability of the nanoflake interactions and subsequent circuit model fit, with a demonstrated sensitivity improvement of 2× with thermal annealing at 200 °C.