Search for: All records

Blistering is a phenomenon sometimes observed in sputtered-deposited thin films but seldom investigated in detail. Here, we consider the case of titania-doped germania (TGO)/silica multi-layers deposited by ion beam sputtering. TGO is a candidate as high refractive index material in the Bragg mirrors for the next iteration of gravitational waves detectors. It needs to be annealed at 600°C for 100h in order to reach the desired relaxation state. However under some growth conditions, in 52-layer TGO/silica stacks, blistering occurs upon annealing at a temperature near 500°C, which corresponds to the temperature where Ar desorbs from TGO. In order to better understand the blistering phenomenon, we measure the Ar transport in single layers of TGO and silica. In the case of <1 μm-thick TGO layers, the Ar desorption is mainly limited by detrapping. The transport model also correctly predicts the evolution of the total amount of Ar in a 8.5 μm stack of TGO and silica layers annealed at 450°C, but in that case, the process is mainly limited by diffusion. Since Ar diffusion is an order of magnitude slower in TGO compared to silica, we observe a correspondingly strong accumulation of Ar in TGO. The Ar transport model is used to explain some regimes of the blisters growth, and we find indications that Ar accumulation is a driver for their growth in general, but the blisters nucleation remains a complex phenomenon influenced by several other factors including stress, substrate roughness, and impurities.

 

Glasses are nonequilibrium solids with properties highly dependent on their method of preparation. In vapor-deposited molecular glasses, structural organization could be readily tuned with deposition rate and substrate temperature. Here, we show that the atomic arrangement of strong network-forming GeO 2 glass is modified at medium range (<2 nm) through vapor deposition at elevated temperatures. Raman spectral signatures distinctively show that the population of six-membered GeO 4 rings increases at elevated substrate temperatures. Deposition near the glass transition temperature is more efficient than postgrowth annealing in modifying atomic structure at medium range. The enhanced medium-range organization correlates with reduction of the room temperature internal friction. Identifying the microscopic origin of room temperature internal friction in amorphous oxides is paramount to design the next-generation interference coatings for mirrors of the end test masses of gravitational wave interferometers, in which the room temperature internal friction is a main source of noise limiting their sensitivity. 

The exceptional stability required from high finesse optical cavities and high precision interferometers is fundamentally limited by Brownian motion noise in the interference coatings of the cavity mirrors. In amorphous oxide coatings these thermally driven fluctuations are dominant in the high index layer compared to those in the low index SiO₂layer in the stack. We present a systematic study of the evolution of the structural and optical properties of ion beam sputtered TiO₂-doped Ta₂O₅films with annealing temperature. We show that low mechanical loss in TiO₂-doped Ta₂O₅with a Ti cation ratio = 0.27 is associated with a material that consists of a homogeneous titanium-tantalum-oxygen mixture containing a low density of nanometer sized Ar-filled voids. When the Ti cation ratio is 0.53, phase separation occurs leading to increased mechanical loss. These results suggest that amorphous mixed oxides with low mechanical loss could be identified by considering the thermodynamics of ternary phase formation.

 

We present the optical and structural characterization of films of${\mathrm{T}\mathrm{a}}_2{\mathrm{O}}_5$,${\mathrm{S}\mathrm{c}}_2{\mathrm{O}}_3$, and${\mathrm{S}\mathrm{c}}_2{\mathrm{O}}_3$doped${\mathrm{T}\mathrm{a}}_2{\mathrm{O}}_5$with a cation ratio around 0.1 grown by reactive sputtering. The addition of${\mathrm{S}\mathrm{c}}_2{\mathrm{O}}_3$as a dopant induces the formation of tantalum suboxide due to the “oxygen getter” property of scandium. The presence of tantalum suboxide greatly affects the optical properties of the coating, resulting in higher absorption loss at$\mathrm{\lambda <\#comment/>}=1064\mathrm{n}\mathrm{m}$. The refractive index and optical band gap of the mixed film do not correspond to those of a mixture of${\mathrm{T}\mathrm{a}}_2{\mathrm{O}}_5$and${\mathrm{S}\mathrm{c}}_2{\mathrm{O}}_3$, given the profound structural modifications induced by the dopant.