skip to main content


Search for: All records

Creators/Authors contains: "Robinson, Zachary R."

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. The stabilization of the threshold switching characteristics of memristive NbOx is examined as a function of sample growth and device characteristics. Sub-stoichiometric Nb2O5 was deposited via magnetron sputtering and patterned in nanoscale (50×50–170×170nm2) W/Ir/NbOx/TiN devices and microscale (2×2–15×15μm2) crossbar Au/Ru/NbOx/Pt devices. Annealing the nanoscale devices at 700 °C removed the need for electroforming the devices. The smallest nanoscale devices showed a large asymmetry in the IV curves for positive and negative bias that switched to symmetric behavior for the larger and microscale devices. Electroforming the microscale crossbar devices created conducting NbO2 filaments with symmetric IV curves whose behavior did not change as the device area increased. The smallest devices showed the largest threshold voltages and most stable threshold switching. As the nanoscale device area increased, the resistance of the devices scaled with the area as R∝A−1, indicating a crystallized bulk NbO2 device. When the nanoscale device size was comparable to the size of the filaments, the annealed nanoscale devices showed similar electrical responses as the electroformed microscale crossbar devices, indicating filament-like behavior in even annealed devices without electroforming. Finally, the addition of up to 1.8% Ti dopant into the films did not improve or stabilize the threshold switching in the microscale crossbar devices.

     
    more » « less
  2. Plasma-enhanced atomic layer deposition (PEALD) enables the epitaxial growth of ultrathin indium nitride (InN) films at significantly reduced process temperatures and with greater control of layer thickness compared to other growth methods. However, the reliance on plasma-surface interactions increases the complexity of the growth process. A detailed understanding of the relationship between the plasma properties and the growth kinetics is therefore required to guide the tuning of growth parameters. We present an in situ investigation of the early-stage PEALD growth kinetics of epitaxial InN within three different plasma regimes using grazing incidence small-angle x-ray scattering (GISAXS). The GISAXS data are supported by diagnostic studies of the plasma species generation in the inductively coupled plasma source as a function of the relative concentrations of the nitrogen/argon gas mixture used in the growth process. The growth mode is found to be correlated to the production of nitrogen species in the plasma, with high concentrations of the atomic N species promoting Volmer–Weber growth (i.e., island growth) and low concentrations promoting Stranski–Krastanov growth (i.e., layer-plus-island growth). The critical thickness for island formation, island center-to-center distance, and island radius are found to increase with ion flux. Furthermore, the island center-to-center distance and areal density are observed to change only during plasma exposure and to continue changing with exposure even after the methylindium adlayer is believed to have fully reacted with the plasma. Our results demonstrate the potential to control the growth kinetics during PEALD of epitaxial films by intentionally accessing specific regimes of plasma species generation.

     
    more » « less