Search for: All records

Mountain block systems are critical to water resources and have been heavily studied and modeled in recent decades. However, due to lack of field data, there is little consistency in how models represent the mountain block subsurface. While there is a large body of research on subsurface heterogeneity, few studies have evaluated the effect that common conceptual choices modelers make in mountainous systems have on simulated hydrology. Here we simulate the hydrology of a semi‐idealized headwater catchment using six common conceptual models of the mountain block subsurface. These scenarios include multiple representations of hydraulic conductivity decaying with depth, changes in soil depth with topography, and anisotropy. We evaluate flow paths, discharge, and water tables to quantify the impact of subsurface conceptualization on hydrologic behavior in three dimensions. Our results show that adding higher conductivity layers in the shallow subsurface concentrates flow paths near the surface and increases average saturated flow path velocities. Increasing heterogeneity by adding additional layers or introducing anisotropy increases the variance in the relationship between the age and length of saturated flow paths. Discharge behavior is most sensitive to heterogeneity in the shallow subsurface layers. Water tables are less sensitive to layering than they are to the overall conductivity in the domain. Anisotropy restricts flow path depths and controls discharge from storage but has little effect on governing runoff. Differences in the response of discharge, water table depth, and residence time distribution to subsurface representation highlight the need to consider model applications when determining the level of complexity that is needed.

Mountain‐front recharge (MFR), or all inflow to a basin‐fill aquifer with its source in the mountain block, is an important component of recharge to basin‐fill aquifer systems. Distinguishing and quantifying the surface from subsurface components of MFR is necessary for water resource planning and management, particularly as climate change may impact these components in distinct ways. This study tests the hypothesis that MFR components can be distinguished in long‐screened, basin‐fill production wells by (1) groundwater age and (2) the median elevation of recharge. We developed an MFR characterization approach by combining age distributions in six wells using tritium, krypton‐85, argon‐39, and radiocarbon, and median recharge elevations from noble gas thermometry combined with numerical experiments to determine recharge temperature lapse rates using flow and energy transport modeling. We found that groundwater age distributions provided valuable information for characterizing the dominant flow system behavior captured by the basin‐fill production wells. Tracers indicated the presence of old (i.e., no detectable tritium) water in a well completed in weathered bedrock located close to the mountain front. Two production wells exhibited age distributions of binary mixing between modern and a small fraction of old water, whereas the remaining wells captured predominantly modern flow paths. Noble gas thermometry provided important complementary information to the age distributions; however, assuming constant recharge temperature lapse rates produced improbable recharge elevations. Numerical experiments suggest that surface MFR, if derived from snowmelt, can locally suppress water table temperatures in the basin‐fill aquifer, with implications for recharge elevations estimated from noble gas thermometry.

Mountain‐block recharge (MBR) is the subsurface inflow of groundwater to lowland aquifers from adjacent mountains. MBR can be a major component of recharge but remains difficult to characterize and quantify due to limited hydrogeologic, climatic, and other data in the mountain block and at the mountain front. The number of MBR‐related studies has increased dramatically in the 15 years since the last review of the topic was conducted by Wilson and Guan (2004), generating important advancements. We review this recent body of literature, summarize current understanding of factors controlling MBR, and provide recommendations for future research priorities. Prior to 2004, most MBR studies were performed in the southwestern United States. Since then, numerous studies have detected and quantified MBR in basins around the world, typically estimating MBR to be 5–50% of basin‐fill aquifer recharge. Theoretical studies using generic numerical modeling domains have revealed fundamental hydrogeologic and topographic controls on the amount of MBR and where it originates within the mountain block. Several mountain‐focused hydrogeologic studies have confirmed the widespread existence of mountain bedrock aquifers hosting considerable groundwater flow and, in some cases, identified the occurrence of interbasin flow leaving headwater catchments in the subsurface—both of which are required for MBR to occur. Future MBR research should focus on the collection of high‐priority data (e.g., subsurface data near the mountain front and within the mountain block) and the development of sophisticated coupled models calibrated to multiple data types to best constrain MBR and predict how it may change in response to climate warming.