Search for: All records

A<sc>bstract</sc> Measurements of fiducial and total inclusive cross sections for W and Z boson production are presented in proton-proton collisions at$$ \sqrt{s} $$ $\sqrt{s}$= 5.02 and 13 TeV. Electron and muon decay modes (ℓ= e orμ) are studied in the data collected with the CMS detector in 2017, in dedicated runs with reduced instantaneous luminosity. The data sets correspond to integrated luminosities of 298 ± 6 pb⁻¹at 5.02 TeV and 206 ± 5 pb⁻¹at 13 TeV. Measured values of the products of the total inclusive cross sections and the branching fractions at 5.02 TeV areσ(pp→W + X)$$ \mathcal{B} $$ $B$(W→ ℓν) = 7300±10 (stat)±60 (syst)±140 (lumi) pb, andσ(pp→Z+X)$$ \mathcal{B} $$ $B$(Z→ ℓ⁺ℓ⁻) = 669±2 (stat)±6 (syst)±13 (lumi) pb for the dilepton invariant mass in the range of 60–120 GeV. The corresponding results at 13 TeV are 20480±10 (stat)±170 (syst)±470 (lumi) pb and 1952±4 (stat)±18 (syst)±45 (lumi) pb. The measured values agree with cross section calculations at next-to-next-to-leading-order in perturbative quantum chromodynamics. Fiducial and total inclusive cross sections, ratios of cross sections of W⁺and W⁻production as well as inclusive W and Z boson production, and ratios of these measurements at 5.02 and 13 TeV are reported. 

Abstract A search is presented for the pair production of new heavy resonances, each decaying into a top quark (t) or antiquark and a gluon (g). The analysis uses data recorded with the CMS detector from proton–proton collisions at a center-of-mass energy of 13$$\,\text {Te}\hspace{-.08em}\text {V}$$ $\text{Te}\text{V}$at the LHC, corresponding to an integrated luminosity of 138$$\,\text {fb}^{-1}$$ ${\text{fb}}^{-1}$. Events with one muon or electron, multiple jets, and missing transverse momentum are selected. After using a deep neural network to enrich the data sample with signal-like events, distributions in the scalar sum of the transverse momenta of all reconstructed objects are analyzed in the search for a signal. No significant deviations from the standard model prediction are found. Upper limits at 95% confidence level are set on the product of cross section and branching fraction squared for the pair production of excited top quarks in the$$\text {t}^{*} \rightarrow {\text {t}} {\text {g}} $$ $\text{t}_{}^{\ast }\to \text{tg}$decay channel. The upper limits range from 120 to 0.8$$\,\text {fb}$$ $\text{fb}$for a$$\text {t}^{*} $$ $\text{t}_{}^{\ast }$with spin-1/2 and from 15 to 1.0$$\,\text {fb}$$ $\text{fb}$for a$$\text {t}^{*} $$ $\text{t}_{}^{\ast }$with spin-3/2. These correspond to mass exclusion limits up to 1050 and 1700$$\,\text {Ge}\hspace{-.08em}\text {V}$$ $\text{Ge}\text{V}$for spin-1/2 and spin-3/2$$\text {t}^{*} $$ $\text{t}_{}^{\ast }$particles, respectively. These are the most stringent limits to date on the existence of$$\text {t}^{*} \rightarrow {\text {t}} {\text {g}} $$ $\text{t}_{}^{\ast }\to \text{tg}$resonances. 

Abstract The Large Hadron Collider at CERN will undergo an upgrade in order to increase its luminosity to 7.5 × 10³⁴cm^-2s^-1. The increased luminosity during this High-Luminosity running phase, starting around 2029, means a higher rate of proton-proton interactions, hence a larger ionizing dose and particle fluence for the detectors. The current tracking system of the CMS experiment will be fully replaced in order to cope with the new operating conditions. Prototype planar pixel sensors for the CMS Inner Tracker with square 50 μm × 50 μm and rectangular 100 μm × 25 μm pixels read out by the RD53A chip were characterized in the lab and at the DESY-II testbeam facility in order to identify designs that meet the requirements of CMS during the High-Luminosity running phase. A spatial resolution of approximately 3.4 μm (2 μm) is obtained using the modules with 50 μm × 50 μm (100 μm × 25 μm) pixels at the optimal angle of incidence before irradiation. After irradiation to a 1 MeV neutron equivalent fluence of Φ_eq = 5.3 × 10¹⁵ cm^-2, a resolution of 9.4 μm is achieved at a bias voltage of 800 V using a module with 50 μm × 50 μm pixel size. All modules retain a hit efficiency in excess of 99% after irradiation to fluences up to 2.1 × 10¹⁶ cm^-2. Further studies of the electrical properties of the modules, especially crosstalk, are also presented in this paper. 

A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. The topic generated a lot of excitement in Snowmass meetings and continues to attract a large number of supporters, including many from the early career community. In light of this very strong interest within the US particle physics community, Snowmass Energy, Theory and Accelerator Frontiers created a cross-frontier Muon Collider Forum in November of 2020. The Forum has been meeting on a monthly basis and organized several topical workshops dedicated to physics, accelerator technology, and detector R&D. Findings of the Forum are summarized in this report. 

Abstract The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5–7.5×10 34 cm -2 s -1 . This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000–4000 fb -1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV. To cope with these challenging environmental conditions, the strip tracker of the CMS experiment will be upgraded using modules with two closely-spaced silicon sensors to provide information to include tracking in the Level-1 trigger selection. This paper describes the performance, in a test beam experiment, of the first prototype module based on the final version of the CMS Binary Chip front-end ASIC before and after the module was irradiated with neutrons. Results demonstrate that the prototype module satisfies the requirements, providing efficient tracking information, after being irradiated with a total fluence comparable to the one expected through the lifetime of the experiment. 

Abstract The Short Strip ASIC (SSA) is one of the four front-end chips designed for the upgrade of the CMS Outer Tracker for the High Luminosity LHC. Together with the Macro-Pixel ASIC (MPA) it will instrument modules containing a strip and a macro-pixel sensor stacked on top of each other. The SSA provides both full readout of the strip hit information when triggered, and, together with the MPA, correlated clusters called stubs from the two sensors for use by the CMS Level-1 (L1) trigger system. Results from the first prototype module consisting of a sensor and two SSA chips are presented. The prototype module has been characterized at the Fermilab Test Beam Facility using a 120 GeV proton beam.