An official website of the United States government
Abstract Mini-magnetospheres are small ion-scale structures that are well suited to studying kinetic-scale physics of collisionless space plasmas. Such ion-scale magnetospheres can be found on local regions of the Moon, associated with the lunar crustal magnetic field. In this paper, we report on the laboratory experimental study of magnetic reconnection in laser-driven, lunar-like ion-scale magnetospheres on the Large Plasma Device at the University of California, Los Angeles. In the experiment, a high-repetition rate (1 Hz), nanosecond laser is used to drive a fast-moving, collisionless plasma that expands into the field generated by a pulsed magnetic dipole embedded into a background plasma and magnetic field. The high-repetition rate enables the acquisition of time-resolved volumetric data of the magnetic and electric fields to characterize magnetic reconnection and calculate the reconnection rate. We notably observe the formation of Hall fields associated with reconnection. Particle-in-cell simulations reproducing the experimental results were performed to study the microphysics of the interaction. By analyzing the generalized Ohm’s law terms, we find that the electron-only reconnection is driven by kinetic effects through the electron pressure anisotropy. These results are compared to recent satellite measurements that found evidence of magnetic reconnection near the lunar surface.
more »
« less
Encyclopedia of Lunar Science: Contribution of Surface Processes to the Lunar Exosphere
The lunar exosphere is generated by a variety of processes: photodesorption from solar UV radiation (PSD), solar wind ion sputtering, meteoritic bombardment, radioactive decay, and thermal desorption. While remote or orbital temporal measurements provide in situ clues to source mechanisms, individual ejection processes are more easily and deeply investigated in laboratory experiments on returned Apollo samples and analogs, allowing quantitative comparisons at lunar-like pressures and temperature. The importance of laboratory experiments cannot be overemphasized, providing measurements of ejection probabilities relevant to exospheric formation, as well as metrics such as surface charge, surface composition and phase, and meteoritic-impact plume characterization. These parameters can be convolved to describe telescopic observations as well as phenomena observed at the lunar surface by orbital / lander measurements, providing ground truth for models of spatial and temporal variations in the exosphere. The following discussion of laboratory work pertinent to the generation of the lunar atmosphere is a starting point for those interested in laboratory simulations and is by no means an exhaustive review.
more »
« less
- Award ID(s):
- 1413380
- PAR ID:
- 10030121
- Date Published:
- Journal Name:
- Encyclopedia of Lunar Science
- Page Range / eLocation ID:
- 1-7
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Determining the presence or absence of a past long-lived lunar magnetic field is crucial for understanding how the Moon’s interior and surface evolved. Here, we show that Apollo impact glass associated with a young 2 million–year–old crater records a strong Earth-like magnetization, providing evidence that impacts can impart intense signals to samples recovered from the Moon and other planetary bodies. Moreover, we show that silicate crystals bearing magnetic inclusions from Apollo samples formed at ∼3.9, 3.6, 3.3, and 3.2 billion years ago are capable of recording strong core dynamo–like fields but do not. Together, these data indicate that the Moon did not have a long-lived core dynamo. As a result, the Moon was not sheltered by a sustained paleomagnetosphere, and the lunar regolith should hold buried 3 He, water, and other volatile resources acquired from solar winds and Earth’s magnetosphere over some 4 billion years.more » « less
-
This paper presents fully kinetic particle simulations of plasma charging at lunar craters with the presence of lunar lander modules using the recently developed Parallel Immersed-Finite-Element Particle-in-Cell (PIFE-PIC) code. The computation model explicitly includes the lunar regolith layer on top of the lunar bedrock, taking into account the regolith layer thickness and permittivity as well as the lunar lander module in the simulation domain, resolving a nontrivial surface terrain or lunar lander configuration. Simulations were carried out to study the lunar surface and lunar lander module charging near craters at the lunar terminator region under mean and severe plasma environments. The lunar module’s position is also investigated to see its effect on the plasma charging relative to the craters. Differential surface charging was clearly resolved by the simulations. For the charging of a lunar lander module made of conducting materials, the results show a near-uniform potential close to that of its surrounding environment and moderate levels of local electric fields. Additionally, the risks associated with charging and discharging increase significantly under a more severe plasma charging environment as shown in the severe plasma environment cases.more » « less
-
This paper presents a modeling and uncertainty quantification (UQ) study of the photoelectron sheath near the lunar surface. A fully kinetic 3-D finite-difference (FD) particle-in-cell (PIC) code is utilized to simulate the plasma interaction near the lunar surface and the resulting photoelectron sheath. For the uncertainty quantification analysis, this FD-PIC code is treated as a black box providing high-fidelity quantities of interest, which are also used to construct efficient reduced-order models to perform UQ analysis. 1-D configuration is chosen to present the analytic sheath solution as well as to demonstrate the procedure and capability of the UQ analysis.more » « less
-
Abstract Crewed missions to the Moon may resume as early as 2026 with NASA's Artemis III mission, and lunar dust exposure/inhalation is a potentially serious health hazard that requires detailed study. Current dust exposure limits are based on Apollo‐era samples that spent decades in long‐term storage on Earth; their diminished reactivity may lead to underestimation of potential harm that could be caused by lunar dust exposure. In particular, lunar dust contains nanophase metallic iron grains, produced by “space weathering”; the reactivity of this unique component of lunar dust is not well understood. Herein, we employ a chemical reduction technique that exposes lunar simulants to heat and hydrogen gas to produce metallic iron particles on grain surfaces. We assess the capacity of these reduced lunar simulants to generate hydroxyl radical (OH*) when immersed in deionized (DI) water, simulated lung fluid (SLF), and artificial lysosomal fluid (ALF). Lunar simulant reduction produces surface‐adhered metallic iron “blebs” that resemble nanophase metallic iron particles found in lunar dust grains. Reduced samples generate ~5–100× greater concentrations of the oxidative OH* in DI water versus non‐reduced simulants, which we attribute to metallic iron. SLF and ALF appear to reduce measured OH*. The increase in observed OH* generation for reduced simulants implies high oxidative damage upon exposure to lunar dust. Low levels of OH* measured in SLF and ALF imply potential damage to proteins or quenching of OH* generation, respectively. Reduction of lunar dust simulants provides a quick cost‐effective approach to study dusty materials analogous to authentic lunar dust.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1007/978-3-319-05546-6
