Abstract This work reports the fabrication and characterization of multifunctional, nanostructured passivation layers formed using a self-assembly process that provide both surface passivation and improved light trapping in crystalline silicon photovoltaic (PV) cells. Scalable block copolymer self-assembly and vapor phase infiltration processes are used to form arrays of aluminum oxide nanostructures (Al 2 O 3 ) on crystalline silicon without substrate etching. The Al 2 O 3 nanostructures are characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and spectroscopic ellipsometry. Injection-level dependent photoconductance measurements are used to determine the effective carrier lifetime of the samples to confirm the nanostructures successfully passivate the Si surface. Finite element method simulations and reflectance measurement show that the nanostructures increase the internal rear reflectance of the PV cell by suppressing the parasitic optical losses in the metal contact. An optimized morphology of the structures is identified for their potential use in PV cells as multifunctional materials providing surface passivation, photon management, and carrier transport pathways.
more »
« less
Photon Management through Virus‐Programmed Supramolecular Arrays
Photon extraction and capture efficiency is a complex function of the material's composition, its molecular structure at the nanoscale, and the overall organization spanning multiple length scales. The architecture of the material defines the performance; nanostructured features within the materials enhance the energy efficiency. Photon capturing materials are largely produced through lithographic, top‐down, manufacturing schemes; however, there are limits to the smallest dimension achievable using this technology. To overcome these technological barriers, a bottom‐up nanomanufacturing is pursued. Inspired by the self‐programmed assembly of virus arrays in host cells resulting in iridescence of infected organisms, virus‐programmed, nanostructured arrays are studied to pave the way for new design principles in photon management and biology‐inspired materials science. Using the nanoparticles formed by plant viruses in combination with charged polymers (dendrimers), a bottom‐up approach is illustrated to prepare a family of broadband, low‐angular dependent antireflection mesoscale layered materials for potential application as photon management coatings. Measurement and theory demonstrate antireflectance and phototrapping properties of the virus‐programmed assembly. This opens up new bioengineering principles for the nanomanufacture of coatings and films for use in LED lighting and photovoltaics.
more » « less- NSF-PAR ID:
- 10038262
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Biosystems
- Volume:
- 1
- Issue:
- 10
- ISSN:
- 2366-7478
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Despite advances in directing the assembly of biomacromolecules into well-defined nanostructures, leveraging pathway complexity of molecular disorder to order transition while bridging materials fabrication from nano- to macroscale remains a challenge. Here, we present templated crystallization of structural proteins to nanofabricate hierarchically structured materials up to centimeter scale, using silk fibroin as an example. The process involves the use of ordered peptide supramolecular assemblies as templates to direct the folding and assembly of silk fibroin into nanofibrillar structures. Silk polymorphs can be engineered by varying the peptide seeds used. Modulation of the relative concentration between silk fibroin and peptide seeds, silk fibroin molecular weight and pH allows control over nanofibrils morphologies and mechanical properties. Finally, facile integration of the bottom-up templated crystallization with emerging top-down techniques enables the generation of macroscopic nanostructured materials with potential applications in information storage/encryption, surface functionalization, and printable three-dimensional constructs of customized architecture and controlled anisotropy.
-
more » « less
Abstract Supramolecular assembly is a promising bottom‐up approach for producing materials that behave as charge transporting components in electronic devices. Although extensive advances have been made during the past two decades, formidable challenges exist in controlling the local randomness present in supramolecular assemblies. Here, a temperature‐triggered supramolecular assembly strategy using heat to heal defects and disorders is reported. The central concept of the molecular design—named the Tetris strategy in this research—is to: i) increase the rotational freedom of the molecules through thermal perturbation, ii) induce conformation‐fitting of adjacent molecules through two different kinds of intermolecular [π···π] interactions, and finally iii) lock the nearby molecules in inactive co‐conformations. Experimentally, upon heating to 57 °C, amorphous solid‐state films undergo spontaneous assembly, leading to the growth of uniform and highly ordered microwire arrays. Temperature‐triggered supramolecular assembly provides an approach closer to the precision control of assembled structures and presents with a broad canvas to work on in approaching a new generation of supramolecular electronics. Tetris is a registered trademark of Tetris Holding, LLC, used with permission.
-
more » « less
Abstract Transparent materials do not absorb light but have profound influence on the phase evolution of transmitted radiation. One consequence is chromatic dispersion, i.e., light of different frequencies travels at different velocities, causing ultrashort laser pulses to elongate in time while propagating. Here we experimentally demonstrate ultrathin nanostructured coatings that resolve this challenge: we tailor the dispersion of silicon nanopillar arrays such that they temporally reshape pulses upon transmission using slow light effects and act as ultrashort laser pulse compressors. The coatings induce anomalous group delay dispersion in the visible to near-infrared spectral region around 800 nm wavelength over an 80 nm bandwidth. We characterize the arrays’ performance in the spectral domain via white light interferometry and directly demonstrate the temporal compression of femtosecond laser pulses. Applying these coatings to conventional optics renders them ultrashort pulse compatible and suitable for a wide range of applications.
-
more » « less
Abstract Living cells have the capability to synthesize molecular components and precisely assemble them from the nanoscale to build macroscopic living functional architectures under ambient conditions. The emerging field of living materials has leveraged microbial engineering to produce materials for various applications but building 3D structures in arbitrary patterns and shapes has been a major challenge. Here we set out to develop a bioink, termed as “microbial ink” that is produced entirely from genetically engineered microbial cells, programmed to perform a bottom-up, hierarchical self-assembly of protein monomers into nanofibers, and further into nanofiber networks that comprise extrudable hydrogels. We further demonstrate the 3D printing of functional living materials by embedding programmed
Escherichia coli (E. coli ) cells and nanofibers into microbial ink, which can sequester toxic moieties, release biologics, and regulate its own cell growth through the chemical induction of rationally designed genetic circuits. In this work, we present the advanced capabilities of nanobiotechnology and living materials technology to 3D-print functional living architectures.
