More Like this

1. Chemoenzymatic Synthesis of Homogeneous Heparan Sulfate and Chondroitin Sulfate Chimeras

   https://doi.org/10.1021/acschembio.2c00146  

   Stancanelli, Eduardo; Liu, Wei; Wander, Rylee; Li, Jine; Wang, Zhangjie; Arnold, Katelyn; Su, Guowei; Kanack, Adam; Pham, Truong Quang; Pagadala, Vijayakanth; et al (May 2022, ACS Chemical Biology)
2. Elucidating Consequences of Selenium Crystallinity on Its Electrochemical Reduction in Aluminum–Selenium Batteries

   https://doi.org/10.1021/acsmaterialslett.4c00531  

   Gordon, Leo_W; Jay, Rahul; Jadhav, Ankur_L; Bhalekar, Snehal_S; Messinger, Robert_J (May 2024, ACS Materials Letters)
3. Three-Dimensional Imaging of Selenium and Chlorine Distributions in Highly Efficient Selenium-Graded Cadmium Telluride Solar Cells

   https://doi.org/10.1109/JPHOTOV.2019.2955313  

   Fiducia, Thomas A.; Li, Kexue; Munshi, Amit H.; Barth, Kurt; Sampath, Walajabad S.; Grovenor, Chris R.; Walls, John Michael (March 2020, IEEE Journal of Photovoltaics)
4. Desorption characteristics of selenium and tellurium thin films

   https://doi.org/10.1116/6.0002013  

   Liu, Derrick S. H.; Hilse, Maria; Engel-Herbert, Roman (September 2022, Journal of Vacuum Science & Technology A)

   The temperature-dependent desorption behavior of selenium and tellurium is investigated using a heated quartz crystal microbalance. Prior to heating the quartz crystal microbalance, selenium and tellurium films with varying thickness were deposited using thermal effusion cells in a molecular beam epitaxy system for subsequent determination of temperature-dependent mass loss of the deposited films. The desorption rate for tellurium was found to exhibit one sharp peak around 190 °C, indicating the loss of the entire film irrespective of film thickness within a temperature window of 20 °C, which was completely evaporated at 200 °C. Similar experiments for selenium revealed that the thermal desorption took place via a two-stage process with a smaller portion of the material desorbing within an even narrower temperature window of 5 °C at a much lower peak temperature of 65 °C, while most selenium desorbed within a temperature range of 10 °C around 90 °C. This two-stage behavior indicated the presence of at least two chemically distinct selenium species or binding states. The direct and quantitative determination of the chalcogen desorption process provides important insights into the kinetics of chalcogenide-based film growth and is in addition of applied benefit to the research community in the area of Se/Te capping and decapping of air sensitive materials as it provides temperature ranges and rates at which full desorption is achieved. Our work furthermore points toward the need for a more detailed understanding of the chemical composition state of atomic and molecular beams supplied from thermal evaporation sources during growth. 

   more » « less
5. Triaxiality in selenium-76

   https://doi.org/10.1103/PhysRevC.99.054313  

   Henderson, J.; Wu, C. Y.; Ash, J.; Brown, B. A.; Bender, P. C.; Elder, R.; Elman, B.; Gade, A.; Grinder, M.; Iwasaki, H.; et al (May 2019, Physical Review C)