Throughout her career, Professor Sharon Mosher has been a pioneer in the structural analysis of polydeformed rocks and regions. Her work on the evolution of superposed rock fabrics in complexly deformed areas, for example, has greatly improved our ability to determine how faults, shear zones, and orogens evolve over time. Traditionally, sequences of foliations, mineral lineations, folds, and other structural elements have been interpreted in terms of discrete, multiphase deformation events. However, alternative interpretations where structural sequences result from a single, progressive event also are common, especially where changes in stress fields or flow parameters result in non-steady deformation. Here, in honor of Professor Mosher, we present examples of three different types of structural sequences that formed in large seismogenic faults and shear zones in SW New Zealand and southern California. These examples illustrate the different ways in which multiple generations and styles of rock fabrics develop and become preserved in zones of localized deformation. The first example is from a large fault zone located inboard of the Puysegur subduction zone in Fiordland, New Zealand. This zone displays several generations of superposed fabrics that record a history of repeated reactivations over a few tens of millions of years. A second set of examples, from both Fiordland and southern California, illustrates how non-steady deformation can result in parallel ductile and brittle fabrics, including veins of pseudotachylyte, that formed during a single, progressive shearing event. The third example, also from Fiordland, shows how parallel rock fabrics in a large, lower crustal shear zone formed diachronously across a large region as the inboard and outboard belts of the Mesozoic Median batholith converged. Each of these examples displays different structural relationships among rock fabrics in the field. To decipher their
histories, we combined structural data with 40Ar/39Ar and U-Pb (zircon, titanite) geochronology. The examples illustrate the utility of combining field observations with both direct and indirect isotopic
more »
« less
Unraveling fault reactivations and their tectonic significance using integrated structural data and 40Ar/39Ar geochronology, examples from NW Vermont and SW New Zealand
Many large fault zones record multiple reactivations that can be difficult to resolve and interpret in the field. Here, we use examples from Vermont and New Zealand to illustrate how structural data combined with 40Ar/39Ar geochronology can be used to reconstruct fault reactivation histories and interpret their possible origins. In SW New Zealand, the Spey-Mica Burn fault zone parallels a transpressive boundary between the Pacific and Australian plates. Integrated structural and 40Ar/39Ar data obtained from pseudotachylyte, mylonite, and other fault rocks allow us to distinguish successive phases of faulting (i.e., reactivations) from cases where different styles of brittle and ductile deformation occurred simultaneously (or nearly so) in the fault zone. Apparent age spectra from multiple minerals show age gradients that reveal four reactivations spanning ~20 Ma. The style and timing of these events correlate well to times of increased convergence rate and collisions between oceanic ridge segments and a nearby trench. Fault zones in NW Vermont also record different styles of reactivation. The Hinesburg Thrust (HT), which juxtaposes Late Proterozoic-Early Cambrian rift clastic rocks against Ordovician carbonate rocks of the Champlain Valley belt, includes a ~30 m thick zone of mylonite that is cut by a cataclastic fault and deformed by folds. 40Ar/39Ar data suggest the mylonite formed during the Ordovician Taconic orogeny and later was folded into a series of domes and basins during the Late Silurian-Devonian Acadian orogeny. Farther west, the Champlain thrust fault (CT) juxtaposes Cambrian dolostones against Ordovician calcareous shales. Superposed faults within the foot wall of the CT show a progressive change in movement direction from W-directed thrusting, to NW-directed thrusting, to N-S slip, and NE-SW slip. These changing slip directions appear to reflect wholly Taconic motion along a north-dipping lateral ramp between Burlington and Shelburne where the CT cuts up section to the south. Acadian reactivation of the CT appears restricted to late folding similar to the HT. These examples highlight the utility of combining structural data with 40Ar/39Ar geochronology to unravel slip histories in continental fault zones and to distinguish among the different styles and origins of fault reactivation.
more »
« less
- Award ID(s):
- 1650183
- NSF-PAR ID:
- 10055517
- Date Published:
- Journal Name:
- Abstracts with programs - Geological Society of America
- Volume:
- 50
- Issue:
- 2
- ISSN:
- 0016-7592
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Throughout her career, Professor Sharon Mosher has been a pioneer in the structural analysis of polydeformed rocks and regions. Her work on the evolution of superposed rock fabrics in complexly deformed areas, for example, has greatly improved our ability to determine how faults, shear zones, and orogens evolve over time. Traditionally, sequences of foliations, mineral lineations, folds, and other structural elements have been interpreted in terms of discrete, multiphase deformation events. However, alternative interpretations where structural sequences result from a single, progressive event also are common, especially where changes in stress fields or flow parameters result in non-steady deformation. Here, in honor of Professor Mosher, we present examples of three different types of structural sequences that formed in large seismogenic faults and shear zones in SW New Zealand and southern California. These examples illustrate the different ways in which multiple generations and styles of rock fabrics develop and become preserved in zones of localized deformation. The first example is from a large fault zone located inboard of the Puysegur subduction zone in Fiordland, New Zealand. This zone displays several generations of superposed fabrics that record a history of repeated reactivations over a few tens of millions of years. A second set of examples, from both Fiordland and southern California, illustrates how non-steady deformation can result in parallel ductile and brittle fabrics, including veins of pseudotachylyte, that formed during a single, progressive shearing event. The third example, also from Fiordland, shows how parallel rock fabrics in a large, lower crustal shear zone formed diachronously across a large region as the inboard and outboard belts of the Mesozoic Median batholith converged. Each of these examples displays different structural relationships among rock fabrics in the field. To decipher their histories, we combined structural data with 40Ar/39Ar and U-Pb (zircon, titanite) geochronology. The examples illustrate the utility of combining field observations with both direct and indirect isotopic dating techniques to distinguish between superposed rock fabrics that formed during progressive deformation and those that represent distinct tectonic events.more » « less
-
The Alaska Range suture zone exposes Cretaceous to Quaternary marine and nonmarine sedimentary and volcanic rocks sandwiched between oceanic rocks of the accreted Wrangellia composite terrane to the south and older continental terranes to the north. New U-Pb zircon ages, 40Ar/39Ar, ZHe, and AFT cooling ages, geochemical compositions, and geological field observations from these rocks provide improved constraints on the timing of Cretaceous to Miocene magmatism, sedimentation, and deformation within the collisional suture zone. Our results bear on the unclear displacement history of the seismically active Denali fault, which bisects the suture zone. Newly identified tuffs north of the Denali fault in sedimentary strata of the Cantwell Formation yield ca. 72 to ca. 68 Ma U-Pb zircon ages. Lavas sampled south of the Denali fault yield ca. 69 Ma 40Ar/39Ar ages and geochemical compositions typical of arc assemblages, ranging from basalt-andesite-trachyte, relatively high-K, and high concentrations of incompatible elements attributed to slab contribution (e.g., high Cs, Ba, and Th). The Late Cretaceous lavas and bentonites, together with regionally extensive coeval calc-alkaline plutons, record arc magmatism during contractional deformation and metamorphism within the suture zone. Latest Cretaceous volcanic and sedimentary strata are locally overlain by Eocene Teklanika Formation volcanic rocks with geochemical compositions transitional between arc and intraplate affinity. New detrital-zircon data from the modern Teklanika River indicate peak Teklanika volcanism at ca. 57 Ma, which is also reflected in zircon Pb loss in Cantwell Formation bentonites. Teklanika Formation volcanism may reflect hypothesized slab break-off and a Paleocene–Eocene period of a transform margin configuration. Mafic dike swarms were emplaced along the Denali fault from ca. 38 to ca. 25 Ma based on new 40Ar/39Ar ages. Diking along the Denali fault may have been localized by strike-slip extension following a change in direction of the subducting oceanic plate beneath southern Alaska from N-NE to NW at ca. 46–40 Ma. Diking represents the last recorded episode of significant magmatism in the central and eastern Alaska Range, including along the Denali fault. Two tectonic models may explain emplacement of more primitive and less extensive Eocene–Oligocene magmas: delamination of the Late Cretaceous–Paleocene arc root and/or thickened suture zone lithosphere, or a slab window created during possible Paleocene slab break-off. Fluvial strata exposed just south of the Denali fault in the central Alaska Range record synorogenic sedimentation coeval with diking and inferred strike-slip displacement. Deposition occurred ca. 29 Ma based on palynomorphs and the youngest detrital zircons. U-Pb detrital-zircon geochronology and clast compositional data indicate the fluvial strata were derived from sedimentary and igneous bedrock presently exposed within the Alaska Range, including Cretaceous sources presently exposed on the opposite (north) side of the fault. The provenance data may indicate ~150 km or more of dextral offset of the ca. 29 Ma strata from inferred sediment sources, but different amounts of slip are feasible. Together, the dike swarms and fluvial strata are interpreted to record Oligocene strike-slip movement along the Denali fault system, coeval with strike-slip basin development along other segments of the fault. Diking and sedimentation occurred just prior to the onset of rapid and persistent exhumation ca. 25 Ma across the Alaska Range. This phase of reactivation of the suture zone is interpreted to reflect the translation along and convergence of southern Alaska across the Denali fault driven by highly coupled flat-slab subduction of the Yakutat microplate, which continues to accrete to the southern margin of Alaska. Furthermore, a change in Pacific plate direction and velocity at ca. 25 Ma created a more convergent regime along the apex of the Denali fault curve, likely contributing to the shutting off of near-fault extension- facilitated arc magmatism along this section of the fault system and increased exhumation rates.more » « less
-
The southern Appalachians record three Paleozoic collisional events, including the Taconic (Ordovician), Neoacadian (Devonian-Mississippian), and Alleghanian (Carboniferous-Permian) orogenies. The complex nature of thermal and structural overprinting related to these events, coupled with a lack of widespread modern geo-, thermo-, and petrochronologic studies here has limited our ability to unravel the precise timing, spatial extent, and conditions of Paleozoic deformation and metamorphism. In the Blue Ridge (BR) and Inner Piedmont (IP) of Tennessee, North Carolina, and Georgia, which represents the orogenic core of the composite southern Appalachians, new monazite laser ablation split stream (LASS) analyses, amphibole 40Ar/39Ar dates, and metamorphic phase equilibria models are integrated with pre-existing geo- and thermochronology data to test holistic models of Paleozoic orogenesis. In the BR west of the Brevard fault zone (BFZ), monazite U-Pb dates are 459-441 Ma and are related to a pronounced Taconic metamorphic peak (to upper amphibolite facies) during development of an eastern Laurentian subduction-accretionary complex, followed by exhumation and cooling during later Neoacadian and Alleghanian thrust stacking, indicated by thermochronologic data. In the BFZ and the IP to the east, monazite U-Pb dates range from 373-356 Ma and delimit the timing of peak Neoacadian kyanite-sillimanite II metamorphism in the IP driven by accretion and partial subduction of Laurentian and mixed-affinity IP rocks beneath the overriding Carolina superterrane. The relatively clear separation of Taconic and Neoacadian monazite dates across the BFZ indicate that this shear zone acted as a Neoacadian thermal-rheologic transition zone that partitioned SW-directed crustal “escape” channel flow of melt-weakened material, as proposed by earlier studies. Late Paleozoic monazite U-Pb dates derived from within the BFZ (~335 Ma) and in the southeasternmost parts of the IP (~324 Ma) reflect Alleghanian reactivation of the BFZ and the northwesternmost extent of Alleghanian Barrovian metamorphism, respectively, but the majority of the BR and the IP in the study area reveal no evidence of post-Neoacadian metamorphic overprinting.more » « less
-
The Late Cretaceous arc flare-up event from 90 to 70 in the Transverse Ranges of the Southern California Batholith was temporally and spatially associated with the development of a large contractional shear system that includes discontinuous segments of the Tumamait shear zone (Mt. Pinos), the Alamo Mountain-Piru Creek shear zone, the Black Belt shear zone (Cucamonga terrane), and the Eastern Peninsular Ranges shear zone. The age and kinematics of these shear zones inform the tectonic setting of the continental arc in Southern California during the beginning of the Laramide orogeny and during postulated large-magnitude dextral translations along the margin (the Baja-BC hypothesis). The Mt. Pinos sector of the Southern California Batholith preserves the intra-arc, transpressional Tumamait shear zone and the ductile-to-brittle Sawmill thrust, both of which record Late Cretaceous deformation. The batholith and shear zone are hosted by Mesoproterozoic biotite gneisses and migmatites (1750-1760 Ma), Neoproterozoic biotite granites (660 Ma), Permo-Triassic granitic gneisses and amphibolite (260-250 Ma), and Late Jurassic granites and gneisses (160-140 Ma). Late Cretaceous rocks are variably deformed and include porphyritic granodiorite gneisses and peraluminous granites emplaced at 86 to 70 Ma. Mylonites of the Tumamait shear zone affect all rocks in the area and generally strike NW-SE and dip moderately to the NE and SW. Mineral stretching lineations plunge shallowly to the SE. Mylonitic fabrics are folded into a regional, SE-plunging synform that results in alternating bands of sinistral and dextral shear fabrics. Syn-kinematic titanites from 5 mylonitic samples give a 720-700°C temperature range, and lower-intercept 206Pb/238U dates of 77.0 Ma, 76.8 Ma, 75.1 Ma, 74.2 Ma, and 74.0 Ma. Subsequent folding of the mylonite is linked to N-directed motion on the Sawmill thrust. 40Ar-39Ar thermochronology ages of 67-66 Ma and onlapping Eocene shales indicate Latest Cretaceous activity on the thrust, prior to Eocene arc collapse. Based on the age of the Tumamait shear zone, we speculate that it is related to sinistral deformation observed in the nearby Alamo Mountain-Piru Creek and the Black Belt shear zones. We attribute the younger Sawmill thrust to collision of the Hess oceanic plateau with the Southern California Batholith after 70 Ma.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
