More Like this

1. A Dual‐Crosslinking Design for Resilient Lithium‐Ion Conductors

   https://doi.org/10.1002/adma.201804142  

   Lopez, Jeffrey ; Sun, Yongming ; Mackanic, David G. ; Lee, Minah ; Foudeh, Amir M. ; Song, Min‐Sang ; Cui, Yi ; Bao, Zhenan ( September 2018 , Advanced Materials)

   Solid‐state electrolyte materials are attractive options for meeting the safety and performance needs of advanced lithium‐based rechargeable battery technologies because of their improved mechanical and thermal stability compared to liquid electrolytes. However, there is typically a tradeoff between mechanical and electrochemical performance. Here an elastic Li‐ion conductor with dual covalent and dynamic hydrogen bonding crosslinks is described to provide high mechanical resilience without sacrificing the room‐temperature ionic conductivity. A solid‐state lithium‐metal/LiFePO₄cell with this resilient electrolyte can operate at room temperature with a high cathode capacity of 152 mAh g⁻¹for 300 cycles and can maintain operation even after being subjected to intense mechanical impact testing. This new dual crosslinking design provides robust mechanical properties while maintaining ionic conductivity similar to state‐of‐the‐art polymer‐based electrolytes. This approach opens a route toward stable, high‐performance operation of solid‐state batteries even under extreme abuse.

    

   more » « less
2. Highly‐Cyclable Room‐Temperature Phosphorene Polymer Electrolyte Composites for Li Metal Batteries

   https://doi.org/10.1002/adfm.201910749  

   Rojaee, Ramin ; Cavallo, Salvatore ; Mogurampelly, Santosh ; Wheatle, Bill K. ; Yurkiv, Vitaliy ; Deivanayagam, Ramasubramonian ; Foroozan, Tara ; Rasul, Md Golam ; Sharifi‐Asl, Soroosh ; Phakatkar, Abhijit H. ; et al ( June 2020 , Advanced Functional Materials)

   Despite significant interest toward solid‐state electrolytes owing to their superior safety in comparison to liquid‐based electrolytes, sluggish ion diffusion and high interfacial resistance limit their application in durable and high‐power density batteries. Here, a novel quasi‐solid Li⁺ion conductive nanocomposite polymer electrolyte containing black phosphorous (BP) nanosheets is reported. The developed electrolyte is successfully cycled against Li metal (over 550 h cycling) at 1 mA cm⁻²at room temperature. The cycling overpotential is dropped by 75% in comparison to BP‐free polymer composite electrolyte indicating lower interfacial resistance at the electrode/electrolyte interfaces. Molecular dynamics simulations reveal that the coordination number of Li⁺ions around (trifluoromethanesulfonyl)imide (TFSI⁻) pairs and ethylene‐oxide chains decreases at the Li metal/electrolyte interface, which facilitates the Li⁺transport through the polymer host. Density functional theory calculations confirm that the adsorption of the LiTFSI molecules at the BP surface leads to the weakening of N and Li atomic bonding and enhances the dissociation of Li⁺ions. This work offers a new potential mechanism to tune the bulk and interfacial ionic conductivity of solid‐state electrolytes that may lead to a new generation of lithium polymer batteries with high ionic conduction kinetics and stable long‐life cycling.

    

   more » « less
3. Decoupling the Ionic Conductivity and Elastic Modulus of Gel Electrolytes: Fully Zwitterionic Copolymer Scaffolds in Lithium Salt/Ionic Liquid Solutions

   https://doi.org/10.1002/aenm.201801646  

   D'Angelo, Anthony J. ; Panzer, Matthew J. ( July 2018 , Advanced Energy Materials)

   A critical barrier to overcome in the development of solid‐state electrolytes for lithium batteries is the trade‐off between sacrificing ionic conductivity for enhancement of mechanical stiffness. Here, a physically cross‐linked, polymer‐supported gel electrolyte consisting of a lithium salt/ionic liquid solution featuring a fully zwitterionic (ZI) copolymer network is introduced for rechargeable lithium‐based batteries. The ZI scaffold is synthesized using a 3:1 molar ratio of 2‐methacryloyloxyethyl phosphorylcholine and sulfobetaine vinylimidazole, and the total polymer content is varied between 1.1 and 12.5 wt%. Room‐temperature ionic conductivity values comparable to the base liquid electrolyte (≈1 mS cm⁻¹) are achieved in ZI copolymer‐supported gels that display compressive elastic moduli as large as 14.3 MPa due to ZI dipole–dipole cross‐links. Spectroscopic characterization suggests a change in the Li⁺coordination shell upon addition of the zwitterions, indicative of strong Li⁺···ZI group interactions. Li⁺transference number measurements reveal an increase in Li⁺conductivity within a ZI gel electrolyte (nearly doubles). ZI gels display enhanced stability against Li metal, dendrite suppression, and suitable charge–discharge performance in a graphite|lithium nickel cobalt manganese oxide cell. Fully ZI polymer networks in nonvolatile, ionic liquid‐based electrolytes represent a promising approach toward realizing highly conductive, mechanically rigid gels for lithium battery technologies.

    

   more » « less
4. Layered Heterostructure Ionogel Electrolytes for High‐Performance Solid‐State Lithium‐Ion Batteries

   https://doi.org/10.1002/adma.202007864  

   Hyun, Woo Jin ; Thomas, Cory M. ; Luu, Norman S. ; Hersam, Mark C. ( February 2021 , Advanced Materials)

   Ionogel electrolytes based on ionic liquids and gelling matrices offer several advantages for solid‐state lithium‐ion batteries, including nonflammability, wide processing compatibility, and favorable electrochemical and thermal properties. However, the absence of ionic liquids that are concurrently stable at low and high potentials constrains the electrochemical windows of ionogel electrolytes and thus their high‐energy‐density applications. Here, ionogel electrolytes with a layered heterostructure are introduced, combining high‐potential (anodic stability: >5 V vs Li/Li⁺) and low‐potential (cathodic stability: <0 V vs Li/Li⁺) imidazolium ionic liquids in a hexagonal boron nitride nanoplatelet matrix. These layered heterostructure ionogel electrolytes lead to extended electrochemical windows, while preserving high ionic conductivity (>1 mS cm⁻¹at room temperature). Using the layered heterostructure ionogel electrolytes, full‐cell solid‐state lithium‐ion batteries with a nickel manganese cobalt oxide cathode and a graphite anode are demonstrated, exhibiting voltages that are unachievable with either the high‐potential or low‐potential ionic liquid alone. Compared to ionogel electrolytes based on mixed ionic liquids, the layered heterostructure ionogel electrolytes enable higher stability operation of full‐cell lithium‐ion batteries, resulting in significantly enhanced cycling performance.

    

   more » « less
5. High-performance all-solid-state batteries enabled by salt bonding to perovskite in poly(ethylene oxide)

   https://doi.org/10.1073/pnas.1907507116  

   Xu, Henghui ; Chien, Po-Hsiu ; Shi, Jianjian ; Li, Yutao ; Wu, Nan ; Liu, Yuanyue ; Hu, Yan-Yan ; Goodenough, John B. ( September 2019 , Proceedings of the National Academy of Sciences)

   Flexible and low-cost poly(ethylene oxide) (PEO)-based electrolytes are promising for all-solid-state Li-metal batteries because of their compatibility with a metallic lithium anode. However, the low room-temperature Li-ion conductivity of PEO solid electrolytes and severe lithium-dendrite growth limit their application in high-energy Li-metal batteries. Here we prepared a PEO/perovskite Li 3/8 Sr 7/16 Ta 3/4 Zr 1/4 O 3 composite electrolyte with a Li-ion conductivity of 5.4 × 10 −5 and 3.5 × 10 −4 S cm −1 at 25 and 45 °C, respectively; the strong interaction between the F − of TFSI − (bis-trifluoromethanesulfonimide) and the surface Ta 5+ of the perovskite improves the Li-ion transport at the PEO/perovskite interface. A symmetric Li/composite electrolyte/Li cell shows an excellent cyclability at a high current density up to 0.6 mA cm −2 . A solid electrolyte interphase layer formed in situ between the metallic lithium anode and the composite electrolyte suppresses lithium-dendrite formation and growth. All-solid-state Li|LiFePO 4 and high-voltage Li|LiNi 0.8 Mn 0.1 Co 0.1 O 2 batteries with the composite electrolyte have an impressive performance with high Coulombic efficiencies, small overpotentials, and good cycling stability. 

   more » « less