Triplet–triplet annihilation‐based photon upconversion (TTA‐UC) can efficiently generate higher energy photons at low relative fluences. Bulk metal halide perovskites have offered promise in efficiently sensitizing molecular triplet states in the solid state, necessary for the integration of TTA‐UC into device‐based applications. Recent work focused on TTA‐UC from a rubrene triplet annihilator sensitized by perovskite thin films has established relatively efficient charge extraction from the perovskite, forming the triplet exciton in rubrene. Yet, the specifics underpinning charge transfer at the perovskite/rubrene interface are not fully elucidated. To improve device performance and study the properties governing charge transfer at the interface, various organic solvents are explored to treat the perovskite surface. Scanning tunneling microscopy and spectroscopy show a difference in the electronic band structure, where both n‐ and p‐type terminated perovskite surfaces are observed depending on the solvent used. Supported by optical spectroscopy, the impact of the perovskite electronic structure is monitored, indicating that n‐type perovskite sensitizers feature higher TTA‐UC efficiencies due to favorable band bending resulting in efficient hole‐mediated triplet formation. Overall, the tuning of the electronic structure of the perovskite sensitizer through solvent treatment is shown to be a key force in tuning the mechanism of efficient triplet generation.
Thiol–ene click chemistry: a modular approach to solid-state triplet–triplet annihilation upconversion
The advancement of triplet–triplet annihilation based upconversion (TTA-UC) in emerging technologies necessitates the development of solid-state systems that are readily accessible and broadly applicable. Here, we demonstrate that thiol–ene click chemistry can be used as a facile cure-on-demand synthetic route to access elastomeric films capable of TTA-UC. Photopolymerization of multifunctional thiols in the presence of a thiol-functionalized 9,10-diphenylanthracene (DPA) emitter results in covalent DPA integration and homogenous crosslinked polymer networks. The palladium( ii ) octaethylporphyrin (PdOEP) sensitizer is subsequently introduced into the films through solution immersion. Upon excitation at 544 nm, green-to-blue upconversion is observed with compositional tuning resulting in an optimal upconverted emission intensity at 1.0 wt% DPA and 0.02 wt% PdOEP. The effectiveness of thiol–ene networks to function as robust host materials for solid-state TTA-UC is further demonstrated by improved photostability in air.
more »
« less
- Award ID(s):
- 1632825
- NSF-PAR ID:
- 10057183
- Date Published:
- Journal Name:
- Journal of Materials Chemistry C
- Volume:
- 6
- Issue:
- 15
- ISSN:
- 2050-7526
- Page Range / eLocation ID:
- 3876 to 3881
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract High energy photons (λ < 400 nm) are frequently used to initiate free radical polymerizations to form polymer networks, but are only effective for transparent objects. This phenomenon poses a major challenge to additive manufacturing of particle‐reinforced composite networks since deep light penetration of short‐wavelength photons limits the homogeneous modification of physicochemical and mechanical properties. Herein, the unconventional, yet versatile, multiexciton process of triplet–triplet annihilation upconversion (TTA‐UC) is employed for curing opaque hydrogel composites created by direct‐ink‐write (DIW) 3D printing. TTA‐UC converts low energy red light (λmax = 660 nm) for deep penetration into higher‐energy blue light to initiate free radical polymerizations within opaque objects. As proof‐of‐principle, hydrogels containing up to 15 wt.% TiO2filler particles and doped with TTA‐UC chromophores are readily cured with red light, while composites without the chromophores and TiO2loadings as little as 1–2 wt.% remain uncured. Importantly, this method has wide potential to modify the chemical and mechanical properties of complex DIW 3D‐printed composite polymer networks.
-
The development of efficient solid-state photon upconversion (UC) devices remains paramount for practical applications of the technology. In recent years, the incorporation of perovskite thin films as triplet sensitizers for triplet–triplet annihilation (TTA)-based UC has provided a promising solution. In the pursuit of finding an “ideal annihilator” to maximize the apparent anti-Stokes shift, we investigate naphtho[2,3-a]pyrene (NaPy) as an annihilator in both solution-based and perovskite-sensitized TTA-UC systems. Surprisingly, we observe different emission behaviors of NaPy in the solid state based on the excitation wavelength. Under direct excitation, a high-energy transition S1' dominates the emission spectrum, while UC results in increased emission from a lower lying state S1''. We propose that this is the result of aggregation-related lowering of the singlet excited state thus changing the fundamental energetic landscape underlying TTA. Aggregation decreases the singlet energy below the energy level of the triplet pair state 1(TT), yielding energetically favorable emission from the aggregated singlet state S1'' and weak emission from the higher lying singlet state S1' through thermally or entropically driven TTA-UC.more » « less
-
Optical upconversion (UC) of low energy photons into high energy photons enables solar cells to harvest photons with energies below the band gap of the absorber, reducing the transmission loss. UC based on triplet–triplet annihilation (TTA) in organic chromophores can upconvert photons from sunlight, albeit with low conversion efficiency. We utilize three energy-based criteria to assess the UC potential of TTA emitters in terms of the quantum yield (QY) and the anti-Stokes shift. The energy loss in the singlet pathway of an emitter encounter complex, where a high energy photon is emitted, determines whether a chromophore may undergo TTA. The energy loss in the triplet pathway, which is the main competing process, impacts the TTA QY. The energy difference between the lowest singlet and triplet excitation states in TTA emitters sets an upper bound for the anti-Stokes shift of TTA-UC. Using the energetic criteria evaluated by time-dependent density functional theory (TDDFT) calculations, we find that benzo[ a ]tetracene, benzo[ a ]pyrene, and their derivatives are promising TTA emitters. The energetics assessment and computer simulations could be used to efficiently discover and design more candidate high-performance TTA emitters.more » « less
-
Triplet–triplet annihilation upconversion (TTA-UC) is a process that shows promise for applications such as energy-harvesting and light-generation technologies. The irradiance dependent performance of TTA-UC systems is typically gauged using a graphical analysis, rather than a detailed model. Additionally, kinetic models for TTA-UC rarely incorporate mass conservation, which is a phenomenon that can have important consequences under experimentally relevant conditions. We present an analytical, mass-conserving kinetic model for TTA-UC, and demonstrate that the mass-conservation constraint cannot generally be ignored. This model accounts for saturation in TTA-UC data. Saturation complicates the interpretation of the threshold irradiance I th , a popular performance metric. We propose two alternative figures of merit for overall performance. Finally, we show that our model can robustly fit experimental data from a wide variety of sensitized TTA-UC systems, enabling the direct and accurate determination of I th and of our proposed performance metrics. We employ this fitting procedure to benchmark and compare these metrics, using data from the literature.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/C7TC05729F
