skip to main content


Title: The Caltech Photooxidation Flow Tube reactor: design, fluid dynamics and characterization
Flow tube reactors are widely employed to study gas-phase atmospheric chemistry and secondary organic aerosol (SOA) formation. The development of a new laminar-flow tube reactor, the Caltech Photooxidation Flow Tube (CPOT), intended for the study of gas-phase atmospheric chemistry and SOA formation, is reported here. The present work addresses the reactor design based on fluid dynamical characterization and the fundamental behavior of vapor molecules and particles in the reactor. The design of the inlet to the reactor, based on computational fluid dynamics (CFD) simulations, comprises a static mixer and a conical diffuser to facilitate development of a characteristic laminar flow profile. To assess the extent to which the actual performance adheres to the theoretical CFD model, residence time distribution (RTD) experiments are reported with vapor molecules (O3) and submicrometer ammonium sulfate particles. As confirmed by the CFD prediction, the presence of a slight deviation from strictly isothermal conditions leads to secondary flows in the reactor that produce deviations from the ideal parabolic laminar flow. The characterization experiments, in conjunction with theory, provide a basis for interpretation of atmospheric chemistry and SOA studies to follow. A 1-D photochemical model within an axially dispersed plug flow reactor (AD-PFR) framework is formulated to evaluate the oxidation level in the reactor. The simulation indicates that the OH concentration is uniform along the reactor, and an OH exposure (OHexp) ranging from ∼ 109 to ∼ 1012 molecules cm−3 s can be achieved from photolysis of H2O2. A method to calculate OHexp with a consideration for the axial dispersion in the present photochemical system is developed.  more » « less
Award ID(s):
1523500
NSF-PAR ID:
10057671
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Atmospheric Measurement Techniques
Volume:
10
Issue:
3
ISSN:
1867-8548
Page Range / eLocation ID:
839 to 867
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract. Oxidation flow reactors (OFRs) are a promising complement toenvironmental chambers for investigating atmospheric oxidation processes andsecondary aerosol formation. However, questions have been raised about howrepresentative the chemistry within OFRs is of that in the troposphere. Weinvestigate the fates of organic peroxy radicals (RO2), which playa central role in atmospheric organic chemistry, in OFRs and environmentalchambers by chemical kinetic modeling and compare to a variety of ambientconditions to help define a range of atmospherically relevant OFR operatingconditions. For most types of RO2, their bimolecular fates in OFRsare mainly RO2+HO2 and RO2+NO, similar to chambers andatmospheric studies. For substituted primary RO2 and acylRO2, RO2+RO2 can make a significant contribution tothe fate of RO2 in OFRs, chambers and the atmosphere, butRO2+RO2 in OFRs is in general somewhat less important than inthe atmosphere. At high NO, RO2+NO dominates RO2 fate inOFRs, as in the atmosphere. At a high UV lamp setting in OFRs,RO2+OH can be a major RO2 fate and RO2isomerization can be negligible for common multifunctional RO2,both of which deviate from common atmospheric conditions. In the OFR254operation mode (for which OH is generated only from the photolysis of addedO3), we cannot identify any conditions that can simultaneouslyavoid significant organic photolysis at 254 nm and lead to RO2lifetimes long enough (∼ 10 s) to allow atmospherically relevantRO2 isomerization. In the OFR185 mode (for which OH is generatedfrom reactions initiated by 185 nm photons), high relative humidity, low UVintensity and low precursor concentrations are recommended for theatmospherically relevant gas-phase chemistry of both stable species andRO2. These conditions ensure minor or negligible RO2+OHand a relative importance of RO2 isomerization in RO2fate in OFRs within ×2 of that in the atmosphere. Under theseconditions, the photochemical age within OFR185 systems can reach a fewequivalent days at most, encompassing the typical ages for maximum secondaryorganic aerosol (SOA) production. A small increase in OFR temperature mayallow the relative importance of RO2 isomerization to approach theambient values. To study the heterogeneous oxidation of SOA formed underatmospherically relevant OFR conditions, a different UV source with higherintensity is needed after the SOA formation stage, which can be done withanother reactor in series. Finally, we recommend evaluating the atmosphericrelevance of RO2 chemistry by always reporting measured and/orestimated OH, HO2, NO, NO2 and OH reactivity (or at leastprecursor composition and concentration) in all chamber and flow reactorexperiments. An easy-to-use RO2 fate estimator program is includedwith this paper to facilitate the investigation of this topic in futurestudies.

     
    more » « less
  2. Abstract

    We investigated the photosensitizing properties of secondary organic aerosol (SOA) formed during the hydroxyl radical (OH) initiated oxidation of naphthalene. This SOA was injected into an aerosol flow tube and exposed to UV radiation and gaseous volatile organic compounds or sulfur dioxide (SO2). The aerosol particles were observed to grow in size by photosensitized uptake of d‐limonene and β‐pinene. In the presence of SO2, a photosensitized production (0.2–0.3 µg m−3 h−1) of sulfate was observed at all relative humidity (RH) levels. Some sulfate also formed on particles in the dark, probably due to the presence of organic peroxides. The dark and photochemical pathways exhibited different trends with RH, unraveling different contributions from bulk and surface chemistry. As naphthalene and other polycyclic aromatics are important SOA precursors in the urban and suburban areas, these dark and photosensitized reactions are likely to play an important role in sulfate and SOA formation.

     
    more » « less
  3. Abstract. Heterogeneous chemistry of oxidized carbons in aerosol phase is known to significantly contribute to secondary organic aerosol (SOA) burdens. TheUNIfied Partitioning Aerosol phase Reaction (UNIPAR) model was developed to process the multiphase chemistry of various oxygenated organics into SOAmass predictions in the presence of salted aqueous phase. In this study, the UNIPAR model simulated the SOA formation from gasoline fuel, which is amajor contributor to the observed concentration of SOA in urban areas. The oxygenated products, predicted by the explicit mechanism, were lumpedaccording to their volatility and reactivity and linked to stoichiometric coefficients which were dynamically constructed by predetermined mathematical equations at different NOx levels and degrees of gas aging. To improve the model feasibility in regional scales, the UNIPAR model was coupled with the Carbon Bond 6 (CB6r3) mechanism. CB6r3 estimated the hydrocarbon consumption and the concentration of radicals (i.e., RO2 and HO2) to process atmospheric aging of gas products. The organic species concentrations, estimated bystoichiometric coefficient array and the consumption of hydrocarbons, were applied to form gasoline SOA via multiphase partitioning andaerosol-phase reactions. To improve the gasoline SOA potential in ambient air, model parameters were also corrected for gas–wall partitioning(GWP). The simulated gasoline SOA mass was evaluated against observed data obtained in the University of Florida Atmospheric PHotochemical Outdoor Reactor (UF-APHOR) chamber under varying sunlight, NOx levels, aerosol acidity, humidity, temperature, and concentrations of aqueous salts and gasoline vapor. Overall, gasoline SOAwas dominantly produced via aerosol-phase reaction, regardless of the seed conditions owing to heterogeneous reactions of reactive multifunctionalorganic products. Both the measured and simulated gasoline SOA was sensitive to seed conditions showing a significant increase in SOA mass with increasing aerosol acidity and water content. A considerable difference in SOA mass appeared between two inorganic aerosol states (dry aerosol vs. wet aerosol) suggesting a large difference in SOA formation potential between arid (western United States) and humid regions (eastern United States). Additionally, aqueous reactions of organic products increased the sensitivity of gasoline SOA formation to NOx levels as well as temperature. The impact of the chamber wall on SOA formation was generally significant, and it appeared to be higher in the absence of wet salts. Based on the evaluation of UNIPAR against chamber data from 10 aromatic hydrocarbons and gasoline fuel, we conclude that the UNIPAR model with both heterogeneous reactions and the model parameters corrected for GWP can improve the ability to accurately estimate SOA mass in regional scales. 
    more » « less
  4. Isoprene (C5H8) is the largest non-methane volatile organic compound emitted into the atmosphere. Isoprene reacts rapidly with ambient hydroxyl radicals (OH) and subsequent addition of O2 results in the formation alkyl peroxy (RO2) radicals. The fate of the initially formed RO2 radicals has been the focus of continuing theoretical and experimental research. Under pristine conditions where bimolecular reactions of RO2 are limited, the thermodynamically favored RO2 undergoes an intramolecular H-shift followed by reaction with O2 and elimination of HO2 to yield 4-hydroperoxy aldehyde (4-HPALD, C5H8O3), predicted to account for up to 13% of first-generation isoprene photochemical oxidation products. Mass spectrometric evidence has been reported for 4-HPALD, but lack of an authentic standard has precluded definitive confirmation of both the structure of 4-HPALD and its origin as a first-generation product of OH oxidation of isoprene. We report the synthesis and characterization of 4-HPALD and establish that it is a major product of isoprene oxidation. Synthetic 4-HPALD is isolated as the peroxyhemiacetal. As expected for the 4-hydroperoxy aldehyde, 1H NMR spectra show no evidence for equilibration with the carbonyl form, even in protic solvents, and gas-phase chemical analysis by CIMS also shows only a single form. OH oxidation of isoprene in an oxidation flow reactor coupled to an ion mobility source with an HR-CIMS detector unequivocally demonstrates 4-HPALD (and likely also 1-HPALD) as isoprene oxidation products. Although HPALDs have been discounted as significant contributors to SOA, oxidation of 4-HPALD in a potential aerosol mass (PAM) reactor in the presence of ozone and OH indicates 4-HPALD rapidly undergoes autooxidation reactions forming low-volatility particulate products. We have confirmed highly oxygenated compounds with compositions C5H8O6 and C5H10O6 likely from OH oxidation, and C5H10O7 and C5H10O8 compounds likely products of ozonolysis. The PAM oxidation experiment further demonstrates that the highly oxygenated, low-volatility products efficiently nucleate particles. 
    more » « less
  5. Chemical mechanisms play an important role in simulating the atmospheric chemistry of volatile organic compound oxidation. Comparison of mechanism simulations with laboratory chamber data tests our level of understanding of the prevailing chemistry as well as the dynamic processes occurring in the chamber itself. α-Pinene photooxidation is a well-studied system experimentally, for which detailed chemical mechanisms have been formulated. Here, we present the results of simulating low-NO α-pinene photooxidation experiments conducted in the Caltech chamber with the Generator for Explicit Chemistry and Kinetics of Organics in the Atmosphere (GECKO-A) under varying concentrations of seed particles and OH levels. Unexpectedly, experiments conducted at low and high OH levels yield the same secondary organic aerosol (SOA) growth, whereas GECKO-A predicts greater SOA growth under high OH levels. SOA formation in the chamber is a result of a competition among the rates of gas-phase oxidation to low-volatility products, wall deposition of these products, and condensation into the aerosol phase. Various processes – such as photolysis of condensed-phase products, particle-phase dimerization, and peroxy radical autoxidation – are explored to rationalize the observations. In order to explain the observed similar SOA growth at different OH levels, we conclude that vapor wall loss in the Caltech chamber is likely of order 10−5 s−1, consistent with previous experimental measurements in that chamber. We find that GECKO-A tends to overpredict the contribution to SOA of later-generation oxidation products under high-OH conditions. Moreover, we propose that autoxidation may alternatively resolve some or all of the measurement–model discrepancy, but this hypothesis cannot be confirmed until more explicit mechanisms are established for α-pinene autoxidation. The key role of the interplay among oxidation rate, product volatility, and vapor–wall deposition in chamber experiments is illustrated. 
    more » « less