An official website of the United States government
The electrochemical behavior of sulfur-based batteries is intrinsically governed by polysulfide species. Here, we compare the substitutions of selenium and tellurium into polysulfide chains and demonstrate their beneficial impact on the chemistry of lithium–sulfur batteries. While selenium-substituted polysulfides enhance cathode utilization by effectively catalyzing the sulfur/Li 2 S conversion reactions due to the preferential formation of radical intermediates, tellurium-substituted polysulfides improve lithium cycling efficiency by reducing into a passivating interfacial layer on the lithium surface with low Li + -ion diffusion barriers. This unconventional strategy based on “molecular engineering” of polysulfides and exploiting the intrinsic polysulfide shuttle effect is validated by a ten-fold improvement in the cycle life of lean-electrolyte “anode-free” pouch cells. Assembled with no free lithium metal at the anode, the anode-free configuration maximizes the energy density, mitigates the challenges of handling thin lithium foils, and eliminates self-discharge upon cell assembly. The insights generated into the differences between selenium and tellurium chemistries can be applied to benefit a broad range of metal–chalcogen batteries as well as chalcogenide solid electrolytes.
more »
« less
Creating Effective Nanoreactors on Carbon Nanotubes with Mechanochemical Treatments for High‐Areal‐Capacity Sulfur Cathodes and Lithium Anodes
Abstract Li‐S batteries can potentially deliver high energy density and power, but polysulfide shuttle and lithium dendrite formations on Li metal anode have been the major hurdle. The polysulfide shuttle becomes severe particularly when the areal loading of the active material (sulfur) is increased to deliver the high energy density and the charge/discharge current density is raised to deliver high power. This study reports a novel mechanochemical method to create trenches on the surface of carbon nanotubes (CNTs) in free‐standing 3D porous CNT sponges. Unique spiral trenches are created by pressures during the chemical treatment process, providing polysulfide‐philic surfaces for cathode and lithiophilic surfaces for anode. The Li‐S cells made from manufacturing‐friendly sulfur‐sandwiched cathodes and lithium‐infused anodes using the mechanochemically treated electrodes exhibit a strikingly high areal capacity as high as 13.3 mAh cm−2, which is only marginally reduced even with a tenfold increase in current density (16 mA cm−2), demonstrating both high “cell‐level” energy density and power. The outstanding performance can be attributed to the significantly improved reaction kinetics and lowered overpotentials coming from the reduced interfacial resistance and charge transfer resistance at both cathodes and anodes. The trench–wall CNT sponge simultaneously tackles the most critical problems on both the cathodes and anodes of Li‐S batteries, and this method can be utilized in designing new electrode materials for energy storage and beyond.
more »
« less
- Award ID(s):
- 1701200
- PAR ID:
- 10060539
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 28
- Issue:
- 32
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In Li–S batteries, the insulating nature of sulfur and Li 2 S causes enormous challenges, such as high polarization and low active material utilization. The nucleation of the solid discharge product, Li 2 S, during the discharge cycle, and the activation of Li 2 S in the subsequent charge cycle, cause a potential challenge that needs to be overcome. Moreover, the shuttling of soluble lithium polysulfide intermediate species results in active material loss and early capacity fade. In this study, we have used thiourea as an electrolyte additive and showed that it serves as both a redox mediator to overcome the Li 2 S activation energy barrier and a shuttle inhibitor to mitigate the notorious polysulfide shuttling via the investigation of thiourea redox activity, shuttle current measurements and study of Li 2 S activation. The steady-state shuttle current of the Li–S battery shows a 6-fold drop when 0.02 M thiourea is added to the standard electrolyte. Moreover, by adding thiourea, the charge plateau for the first cycle of the Li 2 S based cathodes shifts from 3.5 V (standard ether electrolyte) to 2.5 V (with 0.2 M thiourea). Using this additive, the capacity of the Li–S battery stabilizes at ∼839 mA h g −1 after 5 cycles and remains stable over 700 cycles with a low capacity decay rate of 0.025% per cycle, a tremendous improvement compared to the reference battery that retains only ∼350 mA h g −1 after 300 cycles. In the end, to demonstrate the practical and broad applicability of thiourea in overcoming sulfur-battery challenges and in eliminating the need for complex electrode design, we study two additional battery systems – lithium metal-free cells with a graphite anode and Li 2 S cathode, and Li–S cells with simple slurry-based cathodes fabricated via blending commercial carbon black/S and a binder. We believe that this study manifests the advantages of redox active electrolyte additives to overcome several bottlenecks in the Li–S battery field.more » « less
-
Abstract The development of practical lithium–sulfur (Li–S) batteries with prolonged cycle life and high Coulombic efficiency is limited by both parasitic reactions from dissolved polysulfides and mossy lithium deposition. To address these challenges, here lithium trithiocarbonate (Li2CS3)‐coated lithium sulfide (Li2S) is employed as a dual‐function cathode material to improve the cycling performance of Li–S batteries. Interestingly, at the cathode, Li2CS3forms an oligomer‐structured layer on the surface to suppress polysulfide shuttle. The presence of Li2CS3alters the conventional sulfur reaction pathway, which is supported by material characterization and density functional theory calculation. At the anode, a stable in situ solid electrolyte interphase layer with a lower Li‐ion diffusion barrier is formed on the Li‐metal surface to engender enhanced lithium plating/stripping performance upon cycling. Consequently, the obtained anode‐free full cells with Li2CS3exhibit a superior capacity retention of 51% over 125 cycles, whereas conventional Li2S cells retain only 26%. This study demonstrates that Li2CS3inclusion is an efficient strategy for designing high‐energy‐density Li–S batteries with extended cycle life.more » « less
-
Abstract Practical applications of lithium metal batteries are often limited by low cycling efficiencies and uncontrolled lithium dendrite growth caused by unstable and heterogeneous lithium‐electrolyte interfaces. To address this issue, a calix[4]pyrrole‐based wavy covalent organic framework (WCOF) is developed that acts as a protective layer to suppress Li dendrite growth and reduce side reactions on the Li anode. The presentWCOFis porous and contains calix[4]pyrrole units acting as “molecular traps” that allow efficient PF6−anion capture while allowing for uniform Li+diffusion. This provides structurally stable artificial protective layers that permit high Li+transference numbers. The resulting solid electrolyte interphases permit ultralong‐term stable cycling at a current density of 1 mA cm−2and reversible lithium plating/stripping (over 2500 h) at an areal capacity of 2 mAh cm−2. The protected anodes of this study also demonstrated excellent cell stability through 260 cycles when paired with high‐voltage cathodes (NCM811 with high mass loading: 20 mg cm−2).more » « less
-
Lithium‐sulfur (Li‐S) batteries offer high specific capacities but their development is hindered by several issues, most notably polysulfide shuttle. Previously, a new form of titania nanomaterial, 1D lepidocrocite (1DL) nanofilaments was shown to serve as a sulfur (S) host for Li‐S batteries. In this work, porous mesostructured particles are introduced as a new morphology of the titania 1DL to improve its performance as a S host. Furthermore, employing a facile, aqueous, one‐step surface functionalization with dopamine enhances 1DL interactions with S, as confirmed by changes in infrared spectroscopy peaks and an increase in d‐spacing via X‐ray diffraction. This surface functionalization results in a reduction of 1DL band gap energy (Eg) from 3.62 to ≈2.29 eV, resulting in a 2.6‐fold increase in electrical conductivity. Additionally, the surface functionalization renders a more conformal coating of S on the 1DL, leading to increased S utilization and interaction with the 1DL. Electrochemical testing shows a 20% reduction in the polysulfide shuttle current in comparison to base 1DL and 560 mAh g−1at 0.5 C at a S‐loading of 2 mg cm−2. Postmortem X‐ray photoelectron spectroscopy analysis also reveals stronger thiosulfate signals in the dopamine‐functionalized 1DLs, further confirming improved S interactions compared to untreated 1DL.more » « less
