skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Modeling of Soft Sample Deformation in Atomic Force Microscope Imaging: Live Mammalian Cell Example
Abstract A model of the scanning‐caused soft sample deformation during atomic force microscope contact‐mode (CM) imaging is developed. CM imaging has been widely used for topography characterization of live biological samples such as live cells. However, due to the intrinsic softness of these samples, the sample surface deformation caused by the probe–sample interaction leads to significant error in the topography images obtained, and damage to the live biological sample. Although the deformation can be reduced by imaging at a rather slow scan rate (e.g., less than 0.2 Hz), such a low‐speed imaging not only is time consuming, but also inevitably induces large temporal error. In this work, the scanning‐caused surface deformation of soft samples is modeled and quantified, including live biological samples in CM imaging. Effects of both the scanning and the coupling between the vertical and the lateral deformation on the deformation are characterized. The proposed deformation model is validated by implementing it to quantify the topography image difference caused by the scanning‐caused surface deformation of live prostate cancer cells imaged at two different (high and low) speeds, respectively.  more » « less
Award ID(s):
1663055
PAR ID:
10078222
Author(s) / Creator(s):
 ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Theory and Simulations
Volume:
2
Issue:
1
ISSN:
2513-0390
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; (, Nanoscale)
    null (Ed.)
    Scanning ion conductance microscopy (SICM) offers the ability to obtain nanoscale resolution images of the membranes of living cells. Here, we show that a dual-barrel nanopipette probe based potentiometric SICM (P-SICM) can simultaneously map the topography and surface potential of soft, rough and heterogeneously charged surfaces under physiological conditions. This technique was validated and tested by systematic studies on model samples, and the finite element method (FEM) based simulations confirmed its surface potential sensing capability. Using the P-SICM method, we compared both the topography and extracellular potential distributions of the membranes of normal (Mela-A) and cancerous (B16) skin cells. We further monitored the structural and electrical changes of the membranes of both types of cells after exposing them to the elevated potassium ion concentration in extracellular solution, known to depolarize and damage the cell. From surface potential imaging, we revealed the dynamic appearance of heterogeneity of the surface potential of the individual cell membrane. This P-SICM method provides new opportunities to study the structural and electrical properties of cell membrane at the nanoscale. 
    more » « less
  2. ; ; ; ; ; ; ; (, Macromolecular Bioscience)
    Abstract In‐depth understanding of the biophysicochemical interactions at the nano–bio interface is important for basic cell biology and applications in nanomedicine and nanobiosensors. Here, the extracellular surface potential and topography changes of live cell membranes interacting with polymeric nanomaterials using a scanning ion conductance microscopy‐based potential imaging technique are investigated. Two structurally similar amphiphilic conjugated polymer nanoparticles (CPNs) containing different functional groups (i.e., primary amine versus guanidine) are used to study incubation time and functional group‐dependent extracellular surface potential and topographic changes. Transmembrane pores, which induce significant changes in potential, only appear transiently in the live cell membranes during the initial interactions. The cells are able to self‐repair the damaged membrane and become resilient to prolonged CPN exposure. This study provides an important observation on how the cells interact with and respond to extracellular polymeric nanomaterials at the early stage. This study also demonstrates that extracellular surface potential imaging can provide a new insight to help understand the complicated interactions at the nano–bio interface and the following cellular responses. 
    more » « less
  3. ; ; ; ; (, Proceedings of the National Academy of Sciences)
    The biomechanical properties of cells and tissues play an important role in our fundamental understanding of the structures and functions of biological systems at both the cellular and subcellular levels. Recently, Brillouin microscopy, which offers a label-free spectroscopic means of assessing viscoelastic properties in vivo, has emerged as a powerful way to interrogate those properties on a microscopic level in living tissues. However, susceptibility to photodamage and photobleaching, particularly when high-intensity laser beams are used to induce Brillouin scattering, poses a significant challenge. This article introduces a transformative approach designed to mitigate photodamage in biological and biomedical studies, enabling nondestructive, label-free assessments of mechanical properties in live biological samples. By leveraging quantum-light-enhanced stimulated Brillouin scattering (SBS) imaging contrast, the signal-to-noise ratio is significantly elevated, thereby increasing sample viability and extending interrogation times without compromising the integrity of living samples. The tangible impact of this methodology is evidenced by a notable three-fold increase in sample viability observed after subjecting the samples to three hours of continuous squeezed-light illumination, surpassing the traditional coherent light-based approaches. The quantum-enhanced SBS imaging holds promise across diverse fields, such as cancer biology and neuroscience where preserving sample vitality is of paramount significance. By mitigating concerns regarding photodamage and photobleaching associated with high-intensity lasers, this technological breakthrough expands our horizons for exploring the mechanical properties of live biological systems, paving the way for an era of research and clinical applications. 
    more » « less
  4. ; ; ; (, Current Protocols)
    Abstract Cells in living tissues are exposed to substantial mechanical forces and constraints imposed by neighboring cells, the extracellular matrix, and external factors. Mechanical forces and physical confinement can drive various cellular responses, including changes in gene expression, cell growth, differentiation, and migration, all of which have important implications in physiological and pathological processes, such as immune cell migration or cancer metastasis. Previous studies have shown that nuclear deformation induced by 3D confinement promotes cell contractility but can also cause DNA damage and changes in chromatin organization, thereby motivating further studies in nuclear mechanobiology. In this protocol, we present a custom‐developed, easy‐to‐use, robust, and low‐cost approach to induce precisely defined physical confinement on cells using agarose pads with micropillars and externally applied weights. We validated the device by confirming nuclear deformation, changes in nuclear area, and cell viability after confinement. The device is suitable for short‐ and long‐term confinement studies and compatible with imaging of both live and fixed samples, thus presenting a versatile approach to studying the impact of 3D cell confinement and nuclear deformation on cellular function. This article contains detailed protocols for the fabrication and use of the confinement device, including live cell imaging and labeling of fixed cells for subsequent analysis. These protocols can be amended for specific applications. © 2023 Wiley Periodicals LLC. Basic Protocol 1: Design and fabrication of the confinement device wafer Basic Protocol 2: Cell confinement assay Support Protocol 1: Fixation and staining of cells after confinement Support protocol 2: Live/dead staining of cells during confinement 
    more » « less
  5. ; ; ; ; ; ; (, Biomedical Optics Express)
    Live-cell imaging reveals the phenotypes and mechanisms of cellular function and their dysfunction that underscore cell physiology, development, and pathology. Here, we report a 3D super-resolution live-cell microscopy method by integrating radiality analysis and Fourier light-field microscopy (rad-FLFM). We demonstrated the method using various live-cell specimens, including actins in Hela cells, microtubules in mammary organoid cells, and peroxisomes in COS-7 cells. Compared with conventional wide-field microscopy,rad-FLFM realizes scanning-free, volumetric 3D live-cell imaging with sub-diffraction-limited resolution of ∼150 nm (x-y) and 300 nm (z), milliseconds volume acquisition time, six-fold extended depth of focus of ∼6 µm, and low photodamage. The method provides a promising avenue to explore spatiotemporal-challenging subcellular processes in a wide range of cell biological research. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email