An official website of the United States government
Abstract Metal cations are potent environmental pollutants that negatively impact human health and the environment. Despite advancements in sensor design, the simultaneous detection and discrimination of multiple heavy metals at sub‐nanomolar concentrations in complex analytical matrices remain a major technological challenge. Here, the design, synthesis, and analytical performance of three highly emissive conjugated polyelectrolytes (CPEs) functionalized with strong iminodiacetate and iminodipropionate metal chelates that operate in challenging environmental samples such as seawater are demonstrated. When coupled with array‐based sensing methods, these polymeric sensors discriminate among nine divalent metal cations (CuII, CoII, NiII, MnII, FeII, ZnII, CdII, HgII, and PbII). The unusually high and robust luminescence of these CPEs enables unprecedented sensitivity at picomolar concentrations in water. Unlike previous array‐based sensors for heavy metals using CPEs, the incorporation of distinct π‐spacer units within the polymer backbone affords more pronounced differences in each polymer's spectroscopic behavior upon interaction with each metal, ultimately producing better analytical information and improved differentiation. To demonstrate the environmental and biological utility, a simple two‐component sensing array is showcased that can differentiate nine metal cation species down to 500 × 10−12 min aqueous media and to 100 × 10−9 min seawater samples collected from the Gulf of Mexico.
more »
« less
Functionalized Cellulose‐Co(II)‐Bis‐Terpyridine Hybrid Material as Colorimetric Sensor for Micromolar Aqueous Cyanide
Abstract A novel surface modification approach is taken to cyanide‐sensing by using functionalized cellulose surface that is chemically modified by immobilizing cobalt(II)‐bis‐terpyridine complex on it. The cobalt(II)‐bis‐tpy complex can exhibit selective “naked eye” colorimetric detection of micromolar level cyanide in aqueous solution, where the visible red‐orange color of cobalt(II)‐bis‐tpy complex solution (aqueous) disappears in the presence of cyanide ions. In order to make the sensor more proficient and easy to use, these cobalt(II)‐bis‐tpy molecules are chemically grafted on the surface of microcrystalline cellulose and cellulose paper, which turns the color of functionalized cellulose orange‐red. Both of these colored cellulose powder and paper exhibit color loss in 10−6maqueous solution of potassium cyanide. This functionalized hybrid inorganic–organic paper offers an easy “dip and detect” cyanide sensing.
more »
« less
- Award ID(s):
- 1800554
- PAR ID:
- 10078367
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 4
- Issue:
- 1
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Transient absorption data of [Fe II (tpy)(CN) 3 ] − reveals spectroscopic signatures indicative of 3 MLCT with a ∼10 ps kinetic component. These data are supported by DFT and TD-DFT calculations, which show that excited state ordering is responsive to the number of cyanide ligands on the complex.more » « less
-
Abstract Aqueous organic redox flow batteries (AORFBs) are highly attractive for large‐scale energy storage because of their nonflammability, low cost, and sustainability. (2,2,6,6‐Tetramethylpiperidin‐1‐yl)oxyl (TEMPO) derivatives, a class of redox active molecules bearing air‐stable free nitroxyl radicals and high redox potential (>0.8 V vs NHE), has been identified as promising catholytes for AORFBs. However, reported TEMPO based molecules are either permeable through ion exchange membranes or not chemically stable enough for long‐term energy storage. Herein, a new TEMPO derivative functionalized with a dual‐ammonium dicationic group,N1, N1, N1, N3, N3, 2, 2, 6, 6‐nonamethyl‐N3‐(piperidinyloxy)propane‐1,3‐bis(ammonium) dichloride (N2‐TEMPO) as a stable, low permeable catholyte for AORFBs is reported. Ultraviolet–visible (UV–vis) and proton nuclear magnetic resonance (1H‐NMR) spectroscopic studies reveal its exceptional stability and ultra‐low permeability (1.49 × 10−12 cm2 s−1). Coupled with 1,1′‐bis[3‐(trimethylammonio)propyl]‐4,4′‐bipyridinium tetrachloride ((NPr)2V) as an anolyte, a 1.35 VN2‐TEMPO/(NPr)2V AORFB with 0.5 melectrolytes (9.05 Wh L−1) delivers a high power density of 114 mW cm−2and 100% capacity retention for 400 cycles at 60 mA cm−2. At 1.0 melectrolyte concentrations, theN2‐TEMPO/(NPr)2V AORFB achieves an energy density of 18.1 Wh L−1and capacity retention of 90% for 400 cycles at 60 mA cm−2.more » « less
-
The synthesis of previously unknown bis(cyclopentadienyl) complexes of the first transition metal, i.e., Sc(II) scandocene complexes, has been investigated using C5H2(tBu)3 (Cpttt), C5Me5 (Cp*), and C5H3(SiMe3)2 (Cp″) ligands. Cpttt 2ScI, 1, formed from ScI3 and KCpttt, can be reduced with potassium graphite (KC8) in hexanes to generate dark-red crystals of the first crystallographically characterizable bis(cyclopentadienyl) scandium(II) complex, Cpttt 2Sc, 2. Complex 2 has a 170.6° (ring centroid)-Sc-(ring centroid) angle and exhibits an eight-line EPR spectrum characteristic of Sc(II) with Aiso = 82.6 MHz (29.6 G). It sublimes at 200 °C at 10−4 Torr and has a melting point of 268−271 °C. Reductions of Cp*2ScI and Cp″2ScI under analogous conditions in hexanes did not provide new Sc(II) complexes, and reduction of Cp*2ScI in benzene formed the Sc(III) phenyl complex, Cp*2Sc(C6H5), 3, by C−H bond activation. However, in Et2O and toluene, reduction of Cp*2ScI at −78 °C gives a dark-red solution, 4, which displays an eight-line EPR pattern like that of 1, but it did not provide thermally stable crystals. Reduction of Cp″2ScI, in THF or Et2O at −35 °C in the presence of 2.2.2-cryptand, yields the green Sc(II) metallocene iodide complex, [K(crypt)][Cp″2ScI], 5, which was identified by X-ray crystallography and EPR spectroscopy and is thermally unstable. The analogous reaction of Cp*2ScI with KC8 and 18-crown-6 in Et2O gave the ligand redistribution product, [Cp*2Sc(18- crown-6-κ2O,O′)][Cp*2ScI2], 6, as the only crystalline product. Density functional theorymore » « less
