An official website of the United States government
Abstract Insect wings are heterogeneous structures, with flexural rigidity varying one to two orders of magnitude over the wing surface. This heterogeneity influences the deformation the flapping wing experiences during flight. However, it is not well understood how this flexural rigidity gradient affects wing performance. Here, we develop a simplified 2D model of a flapping wing as a pitching, plunging airfoil using the assumed mode method and unsteady vortex lattice method to model the structural and fluid dynamics, respectively. We conduct parameter studies to explore how variable flexural rigidity affects mean lift production, power consumption and the forces required to flap the wing. We find that there is an optimal flexural rigidity distribution that maximizes lift production; this distribution generally corresponds to a 3:1 ratio between the wing’s flapping and natural frequencies, though the ratio is sensitive to flapping kinematics. For hovering flight, the optimized flexible wing produces 20% more lift and requires 15% less power compared to a rigid wing but needs 20% higher forces to flap. Even when flapping kinematics deviate from those observed during hover, the flexible wing outperforms the rigid wing in terms of aerodynamic force generation and power across a wide range of flexural rigidity gradients. Peak force requirements and power consumption are inversely proportional with respect to flexural rigidity gradient, which may present a trade-off between insect muscle size and energy storage requirements. The model developed in this work can be used to efficiently investigate other spatially variant morphological or material wing features moving forward.
more »
« less
Proper orthogonal decomposition of straight and level flight kinematics in an insectivorous bat
The kinematics of hipposiderid bats (Hipposideros pratti) in straight and level flight has been deconstructed into a series of modes using proper orthogonal decomposition, to determine the relative importance of each mode in the overall force dynamics. Simplified kinematics have been reconstructed using different combinations of modes, and large eddy simulations were performed to compare the forces generated for each case. The first two modes (0,1) recovered only 62% of the lift, and manifested a drag force instead of thrust, whereas the first three modes (0,1,2) recovered 77% of the thrust and, unexpectedly, even more lift than the native kinematics. This demonstrates that mode 2, which features a combination of streamwise and chordwise cambering and twisting during the upstroke, is critical for the generation of lift, and more so for thrust. Detailed flow analyses reveal that the leading edge vortex and the trailing edge vortex hold the key to understanding this phenomenon. Such reduced order modeling of bat flight could provide guidelines for designing autonomous micro air vehicles which require a detailed understanding of the associated forces for the preservation of structural integrity.
more »
« less
- PAR ID:
- 10084567
- Date Published:
- Journal Name:
- Proceedings of the AIAA Science and Technology Forum and Exposition (SciTech 2018)
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
An analytical model is developed for the lift force produced by unsteady rotating wings; this configuration is a simple representation of a flapping wing. Modelling this is important for the aerodynamic and control-system design for bio-inspired drones. Such efforts have often been limited to being two-dimensional, semi-empirical, sometimes computationally expensive, or quasi-steady. The current model is unsteady and three-dimensional, yet simple to implement, requiring knowledge of only the wing kinematics and geometry. Rotating wings produce a vortex loop consisting of the root vortex, leading-edge vortex, tip vortex and trailing-edge vortex, which grows with time. This is modelled as a tilted planar loop, geometrically specified by the wing size, orientation and motion. By equating the angular impulse of the vortex loop to that of the fluid volume driven by the wing, the circulatory lift force is derived. Potential flow theory gives the fluid-inertial lift. Adding these two contributions yields the total lift formula. The model shows good agreement with a range of experimental and computational cases. Also, a steady-state lift model is developed that compares well with previous work for various angles of attack.more » « less
-
The vortex dynamics and lift force generated by a sinusoidally heaving and pitching airfoil during dynamic stall are experimentally investigated for reduced frequencies of k = fc=U1 = 0:060:16, pitching amplitude of 0 = 75 and heaving amplitude of h0=c = 0:6. The lift force is calculated from the velocity fi elds using the nite-domain impulse theory. The concept of moment arm dilemma associated with the impulse equation is revisited to shed-light on its physical impact on the calculated forces. It is shown that by selecting an objectively de ned origin of the moment-arm, the impulse force equation can be greatly simpli ed to two terms that have a clear physical meaning: (i) the time rate of change of impulse of vortical structures within the control volume and (ii) Lamb vector that indirectly captures the contribution of vortical structures outside of the control volume. The results show that the trend of the lift force is dependent on the formation of the leading edge vortex, as well as its time rate of change of circulation and chord-wise advection relative to the airfoil. Additionally, the trailing edge vortex, which is observed to only form for k 0:10, is shown to have lift-diminishing e ects that intensi es with increasing reduced frequency. Lastly, the concept of optimal vortex formation is investigated. The leading edge vortex is shown to attain the optimal formation number of approximately 4 for k 0:1, when the scaling is based on the leading edge shear velocity. For larger values of k the vortex growth is delayed to later in the cycle and doesn't reach its optimal value. The result is that the peak lift force occurs later in the cycle. This has consequences on power production which relies on correlation of the relative timing of lift force and heaving velocity.more » « less
-
Abstract The spanwise undulated cylinder geometry inspired by seal whiskers has been shown to alter shedding frequency and reduce fluid forces significantly compared to smooth cylindrical geometry. Prior research has parameterized the whisker-inspired geometry and demonstrated the relevance of geometric variations on force reduction properties. Among the geometric parameters, undulation wavelength was identified as a significant contributor to forcing changes. To analyze the effect of undulation wavelength, a thorough investigation isolating changes in wavelength is performed to expand upon previous research that parameterized whisker-inspired geometry and the relevance of geometric variations on the force reduction properties. A set of five whisker-inspired models of varying wavelength are computationally simulated at a Reynolds number of 250 and compared with an equivalent aspect ratio smooth elliptical cylinder. Above a critical non-dimensional value, the undulation wavelength reduces the amplitude and frequency of vortex shedding accompanied by a reduction in oscillating lift force. Frequency shedding is tied to the creation of wavelength-dependent vortex structures which vary across the whisker span. These vortices produce distinct shedding modes in which the frequency and phase of downstream structures interact to decrease the oscillating lift forces on the whisker model with particular effectiveness around the wavelength values typically found in nature. The culmination of these location-based modes produces a complex and spanwise-dependent lift frequency spectra at those wavelengths exhibiting maximum force reduction. Understanding the mechanisms of unsteady force reduction and the relationship between undulation wavelength and frequency spectra is critical for the application of this geometry to vibration tuning and passive flow control for vortex-induced vibration (VIV) reduction.more » « less
-
The hydrodynamics of swimming at the millimeter-to-centimeter scale often present the challenge of having both viscous and inertial effects playing nontrivial roles. Inertial forces arise from the momentum of a moving fluid, while viscous forces come from friction within the flow. The non-dimensional Reynolds number (Re) compares the magnitudes of the inertial and viscous forces within a flow. At low Re (≪ 1), viscous forces dominate; at higher Re (≫ 1), inertial forces are more important. Efforts to understand the hydrodynamics of swimming have mainly focused on the extremes of fully viscous-dominated (Re ≪ 1) or inertia-dominated flow (Re ≫ 1). However, many animals swim in an intermediate regime, where inertia and viscosity are both significant. As an impactful and generalizable case study, we focus on ctenophores (comb jellies), a type of marine zooplankton. Ctenophores swim via the coordinated rowing of numerous highly flexible appendages (ctenes), with Reynolds numbers on the order of 10-100. Their locomotory dynamics present a unique opportunity to study the scaling of rowing (drag-based propulsion) across the low to intermediate Reynolds number range. With a combination of animal experiments, reduced-order analytical modeling, and physical-robotic modeling, we investigate how the kinematic and geometric variables of beating ctenes vary across Re, and how they affect swimming (including force production, speed, and maneuverability). Using animal experiments, we quantify the spatiotemporal asymmetry of beating ctenes across a wide range of animal sizes and Re. With our reduced-order model—the first to incorporate adequate formulations for the viscous-inertial nature of this regime—we explore the maneuverability and agility displayed by ctenophores, and show that by controlling the kinematics of their distributed appendages, ctenophores are capable of nearly omnidirectional swimming. Finally, we use a compliant robotic model that mimics ctenophore rowing kinematics to study rowing performance with direct calculation of thrust and lift forces distributed along the propulsor. These experiments shed new light on the relationship between motion asymmetries and thrust and lift production. This combination of animal experiments, analytical modeling, and physical modeling is the most detailed study of low to intermediate Re rowing to date, and provides a foundation for future applications in bio-inspired design.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.2514/6.2018-2155
