skip to main content

Explore Research Products in the NSF-PAR

Title: Cnoidal Waves for Accessible High Power and Wide-Band Microresonator Frequency Combs
Pumped Kerr microresonators have recently emerged as a promising source of optical frequency combs. The production of octave-spanning spectrum by dispersive waves and consequent demonstration of carrier-envelope phase locking has paved the way toward a wide fi eld of comb applications. Nevertheless, there remain some obstacles before the goal of a simple off-the-shelf comb source is achieved. Current microcomb implementations rely on cavity solitons, and several of the present limitations of microcombs are tied to those of soliton waveforms. Cavity solitons exist only in a small red-detuned region of the pump parameters, where waveforms suffer from thermal instabilities. Furthermore, solitons are always obtained in the multistable regime, and therefore cannot be continuously connected to cw, so that elaborate, often non-deterministic, access protocols are needed to produce them. Another issue is that because solitons are accompanied by a strong pedestal, their comb power efficiency is low.  more » « less
Award ID(s):
1807272
NSF-PAR ID:
10095788
Author(s) / Creator(s):
;
Date Published:
Journal Name:
FRISNO15: FRench-Israel Symposium on Non-Linear & Quantum Optics
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , APL Photonics)

    Quantum cascade lasers (QCLs) have emerged as promising candidates for generating chip-scale frequency combs in mid-infrared and terahertz wavelengths. In this work, we demonstrate frequency comb formation in ring terahertz QCLs using the injection of light from a distributed feedback (DFB) laser. The DFB design frequency is chosen to match the modes of the ring cavity (near 3.3 THz), and light from the DFB is injected into the ring QCL via a bus waveguide. By controlling the power and frequency of the optical injection, we show that combs can be selectively formed and controlled in the ring cavity. Numerical modeling suggests that this comb is primarily frequency-modulated in character, with the injection serving to trigger comb formation. We also show that the ring can be used as a filter to control the output of the DFB QCL, potentially being of interest in terahertz photonic integrated circuits. Our work demonstrates that waveguide couplers are a compelling approach for injecting and extracting radiation from ring terahertz combs and offer exciting possibilities for the generation of new comb states in terahertz, such as frequency-modulated waves, solitons, and more.

     
    more » « less
  2. ; ; ; ( , Photonics Research)

    Radio-frequency (RF) waveform synthesis has broad applications in ultrawide-bandwidth wireless communications, radar systems, and electronic testing. Photonic-based approaches offer key advantages in bandwidth and phase noise thanks to the ultrahigh optical carrier frequency. In this work, we demonstrate Fourier synthesis arbitrary waveform generation (AWG) with integrated optical microresonator solitons. The RF temporal waveform is synthesized through line-by-line amplitude and phase shaping of an optical soliton microcomb, which is down-converted to the RF domain through dual-comb optical coherent sampling. A variety of RF waveforms with tunable repetition cycles are shown in our demonstration. Our approach provides not only the possibility of precise Fourier synthesis at microwave and millimeter-wave frequencies, but also a viable path to fully integrated photonic-based RF AWG on a chip.

     
    more » « less
  3. ; ( , Journal of the Optical Society of America B)

    Kerr resonators generate stable frequency combs and ultrashort pulses with applications in telecommunications, biomedicine, and metrology. Chirped pulse solitons recently observed in normal dispersion Kerr resonators with an intracavity spectral filter can enable new material design freedom, reduced fabrication requirements, and the potential for improved ultrashort pulse peak powers. This study examines the design and formation properties of chirped pulse Kerr solitons essential to enable these advances. First, prior theoretical predictions that chirped pulse solitons are relatively insensitive to cavity loss and the strength of the dispersion map are experimentally validated. The loss insensitivity property is applied to demonstrate high-energy pulses in a cavity with a large output coupling and the map insensitivity property is applied to demonstrate femtosecond pulses, for the first time to the best of our knowledge, from chirped pulse solitons in a dispersion-mapped cavity with small net-normal dispersion. The relationship between chirped pulses and bright pulses enabled by higher order dispersion is examined with respect to pulse formation, cavity design parameters, and performance properties. Finally, guidelines for additional improvements are detailed for chirped pulse soliton-based high-performance pulse generation.

     
    more » « less
  4. ; ; ; ; ; ; ( , Light: Science & Applications)
    Abstract

    Dissipative Kerr solitons in resonant frequency combs offer a promising route for ultrafast mode-locking, precision spectroscopy and time-frequency standards. The dynamics for the dissipative soliton generation, however, are intrinsically intertwined with thermal nonlinearities, limiting the soliton generation parameter map and statistical success probabilities of the solitary state. Here, via use of an auxiliary laser heating approach to suppress thermal dragging dynamics in dissipative soliton comb formation, we demonstrate stable Kerr soliton singlet formation and soliton bursts. First, we access a new soliton existence range with an inverse-sloped Kerr soliton evolution—diminishing soliton energy with increasing pump detuning. Second, we achieve deterministic transitions from Turing-like comb patterns directly into the dissipative Kerr soliton singlet pulse bypassing the chaotic states. This is achieved by avoiding subcomb overlaps at lower pump power, with near-identical singlet soliton comb generation over twenty instances. Third, with the red-detuned pump entrance route enabled, we uncover unique spontaneous soliton bursts in the direct formation of low-noise optical frequency combs from continuum background noise. The burst dynamics are due to the rapid entry and mutual attraction of the pump laser into the cavity mode, aided by the auxiliary laser and matching well with our numerical simulations. Enabled by the auxiliary-assisted frequency comb dynamics, we demonstrate an application of automatic soliton comb recovery and long-term stabilization against strong external perturbations. Our findings hold potential to expand the parameter space for ultrafast nonlinear dynamics and precision optical frequency comb stabilization.

     
    more » « less
  5. ; ; ; ; ; ; ( , Optica)

    A monochromatic wave that circulates in a nonlinear and dispersive optical cavity can become unstable and form a structured waveform. This phenomenon, known as modulation instability, was encountered in fiber lasers, optically pumped Kerr microresonators and, most recently, in monolithic ring quantum cascade lasers (QCLs). In ring QCLs, the instability led to generation of fundamental frequency combs—optical fields that repeat themselves once per cavity round trip. Here we show that the same instability may also result in self-starting harmonic frequency combs—waveforms that repeat themselves multiple times per round trip, akin to perfect soliton crystals in ring Kerr microresonators. We can tailor the intermode spacing of harmonic frequency combs by placing two minute defects with a well-defined separation between them along the ring waveguide. On-demand excitation of frequency comb states with few powerful modes spaced by hundreds of gigahertz may find their use in future sub-terahertz generators.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email