Heterogeneously catalyzed deoxydehydration (DODH) ordinarily occurs over relatively costly oxide supported ReO x sites and is an effective process for the removal of vicinal OH groups that are common in biomass-derived chemicals. Here, through first-principles calculations, we investigate the DODH of 1,4-anhydroerythritol over anatase TiO 2 (101)-supported ReO x and MoO x . The atomistic structures of ReO x and MoO x under typical reaction conditions were identified with constrained thermodynamics calculations as ReO 2 (2O)/6H–TiO 2 and MoO(2O)/3H–TiO 2 , respectively. The calculated energy profile and developed microkinetic reaction model suggest that both ReO 2 (2O)/6H–TiO 2 and MoO(2O)/3H–TiO 2 exhibit a relatively low DODH activity at 413 K. However, at higher temperatures such as 473 K, MoO(2O)/TiO 2 (101) was found to exhibit a reasonably high catalytic activity similar to ReO 2 (2O)/6H–TiO 2 , consistent with a recent experimental study. Mechanistically, the first O–H bond cleavage of 1,4-anhydroerythritol and the dihydrofuran extrusion were found to be the rate-controlling steps for the reaction over ReO 2 (2O)/6H–TiO 2 and MoO(2O)/3H–TiO 2 , respectively. Thus, this study clarifies the mechanism of the DODH over oxide-supported catalysts and provides meaningful insight into the design of low-cost DODH catalysts.
more »
« less
Mechanistic study of the ceria supported, re-catalyzed deoxydehydration of vicinal OH groups
Deoxydehydration (DODH) is an emerging biomass deoxygenation process whereby vicinal OH groups are removed. Based on DFT calculations and microkinetic modeling, we seek to understand the mechanism of the Re-catalyzed deoxydehydration supported on CeO 2 (111). In addition, we aim at understanding the promotional effect of Pd in a heterogeneous ReO x –Pd/CeO 2 DODH catalyst system. We disentangle the contribution of the oxide support, the oxide-supported single ReO x species, and a co-adsorbed Pd promoter that has no direct interaction with the Re species. In the absence of a nearby Pd cluster, a Re site is able to reduce subsurface Ce-ions of a hydroxylated CeO 2 (111) surface, leading to a catalytically active Re +6 species. The effect of Pd is twofold: (i) Pd catalyzes the hydrogen dissociation and spillover onto CeO 2 , which is an indispensable process for the regeneration of the Re catalyst, and (ii) Pd adsorbed in close proximity to Re on CeO 2 (111) facilitates the oxidation of Re to a +7 oxidation state, which leads to an even more active Re species than the Re +6 site present in the absence of Pd. The latter promotional effect of Pd (and change in oxidation state of Re) disappears with increasing Pd–Re distance and in the presence of oxygen defects on the ceria support. Under these conditions, the ReO x –Pd/CeO 2 catalyst system exhibits appreciable activity consistent with recent experiments. The established mechanism and role of various species in the catalyst system help to better understand the deoxydehydration catalysis. Also, the importance of the Re oxidation state and the identified oxidation state modification mechanisms suggest a new pathway for tuning the properties of metal-oxide supported catalysts.
more »
« less
- Award ID(s):
- 1632824
- PAR ID:
- 10099001
- Date Published:
- Journal Name:
- Catalysis Science & Technology
- Volume:
- 8
- Issue:
- 22
- ISSN:
- 2044-4753
- Page Range / eLocation ID:
- 5750 to 5762
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Deoxydehydration (DODH) is an efficient process for the removal of vicinal OH groups of a diol or polyol. Conventional DODH reactions usually take place at a single-site MOx (M=Re, Mo, V etc.) active center, which proceed through a diol condensation step, an alkene extrusion step and a catalyst regeneration (or reduction) step. Here, we suggest that MoS2-supported transition metal atoms allow for the DODH reaction to occur through an alternative mechanism, whereby the C-H bond of a diol is activated first, which facilitates the C-OH bond cleavage on a neighboring carbon. The removal of the second OH group is also facile over the proposed catalysts. Our kinetic studies suggest that the DODH of ethylene glycol on Ru2/MoS2, Ir2/MoS2 and Ru3/MoS2 are highly active with predicted turnover frequencies of over 1/s. Thus, our study suggests a possible approach for the design of highly active DODH catalysts. Apart from being a DODH catalyst, the proposed MoS2-supported catalysts are also highly active as hydrodeoxygenation catalyst for the removal of alcohol OH groups.more » « less
-
In this study, we present an investigation aimed at characterizing and understanding the synergistic interactions in encapsulated catalytic structures between the metal core ( i.e. , Pd) and oxide shell ( i.e. , TiO 2 , ZrO 2 , and CeO 2 ). Encapsulated catalysts were synthesized using a two-step procedure involving the initial colloidal synthesis of Pd nanoparticles (NPs) capped by various ligands and subsequent sol–gel encapsulation of the NPs with porous MO 2 (M = Ti, Zr, Ce) shells. The encapsulated catalytic systems displayed higher activity than the Pd/MO 2 supported structures due to unique physicochemical properties at the Pd–MO 2 interface. Pd@ZrO 2 exhibited the highest catalytic activity for CO oxidation. Results also suggested that the active sites in Pd encapsulated by an amorphous ZrO 2 shell structure were significantly more active than the crystalline oxide encapsulated structures at low temperatures. Furthermore, CO DRIFTS studies showed that Pd redispersion occurred under CO oxidation reaction conditions and as a function of the oxide shell composition, being observed in Pd@TiO 2 systems only, with potential formation of smaller NPs and oxide-supported Pd clusters after reaction. This investigation demonstrated that metal oxide composition and (in some cases) crystallinity play major roles in catalyst activity for encapsulated catalytic systems.more » « less
-
Cerium oxide (ceria, CeO 2−x ) has been traditionally used as a catalyst support functionalized with metal nanoparticles or synthesized with metal dopants for a variety of applications ranging from catalytic converters to solid oxide fuel cells. In a departure from these typical heterogeneous motifs, we explore the interactions of nano-CeO 2−x systems with organometallic oxidation catalysts in organic solvents. Ceria is used here both as an organically-capped colloid and as an uncapped insoluble nanopowder. Both the colloid and nanopowder act as terminal oxidants by accepting hydrogen atoms from a ruthenium Noyori–Ikariya hydride complex. To our knowledge, this is the first demonstration that CeO 2−x can oxidize an organometallic hydride. Building on this concept, we show the uncapped CeO 2−x powder also acts as the terminal acceptor in catalytic alcohol dehydrogenation reactions, utilizing iridium pyridine sulfonamide catalysts under anaerobic and aerobic conditions. The coupling of homogeneous oxidation catalysts with cerium oxide demonstrates the versatility of CeO 2−x and a bridging of concepts in homogeneous and heterogeneous catalysis.more » « less
-
Deoxydehydration (DODH) is the net reduction of diols and polyols to alkenes or dienes and water. Molybdenum cis -dioxo bis-phenolate ONO complexes were synthesized and have been shown to be active for DODH. Catalysts were screened for activity at 150–190 °C, and appreciable yields of up to 59% were obtained. PPh 3 , Na 2 SO 3 , Zn, C, 3-octanol and 2-propanol were screened as reductants. Additionally, the reactivities of a variety of diols were screened. With ( R , R )-(+)-hydrobenzoin as substrate, DODH occurs via a mechanism where reduction of the Mo catalyst is a result of diol oxidation to form two equivalents of aldehyde. These reactions result in complete conversion and near quantitative yields of trans-stilbene and benzaldehyde.more » « less