skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Direct conversion of carbon nanofibers and nanotubes into diamond nanofibers and the subsequent growth of large-sized diamonds
Title: Direct conversion of carbon nanofibers and nanotubes into diamond nanofibers and the subsequent growth of large-sized diamonds
We report a pulsed laser annealing method to convert carbon fibers and nanotubes into diamond fibers at ambient temperature and pressure in air. The conversion of carbon nanofibers and nanotubes into diamond nanofibers involves melting in a super undercooled state using nanosecond laser pulses, and quenching rapidly to convert into phase-pure diamond. The conversion process occurs at ambient temperature and pressure, and can be carried out in air. The structure of diamond fibers has been confirmed by selected-area electron diffraction in transmission electron microscopy, electron-back-scatter-diffraction in high-resolution scanning electron microscopy, all showing characteristic diffraction lines for the diamond structure. The bonding characteristics were determined by Raman spectroscopy with a strong peak near 1332 cm −1 , and high-resolution electron-energy-loss spectroscopy in transmission electron microscopy with a characteristic peak at 292 eV for σ* for sp 3 bonding and the absence of π* for sp 2 bonding. The Raman peak at 1332 cm −1 downshifts to 1321 cm −1 for diamond nanofibers due to the phonon confinement in nanodiamonds. These laser-treated carbon fibers with diamond seeds are used to grow larger diamond crystallites further by using standard hot-filament chemical vapor deposition (HFCVD). We compare these results with those obtained without laser treating the carbon fibers. The details of diamond conversion and HFCVD growth are presented in this paper.  more » « less
Award ID(s):
1735695
PAR ID:
10108789
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Nanoscale
Volume:
11
Issue:
5
ISSN:
2040-3364
Page Range / eLocation ID:
2238 to 2248
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Applied Physics Letters)
    Tensile-strained pseudomorphic Ge 1–x–y Sn x C y was grown on GaAs substrates by molecular beam epitaxy using carbon tetrabromide (CBr 4 ) at low temperatures (171–258 °C). High resolution x-ray diffraction reveals good crystallinity in all samples. Atomic force microscopy showed atomically smooth surfaces with a maximum roughness of 1.9 nm. The presence of the 530.5 cm −1 local vibrational mode of carbon in the Raman spectrum verifies substitutional C incorporation in Ge 1–x–y Sn x C y samples. X-ray photoelectron spectroscopy confirms carbon bonding with Sn and Ge without evidence of sp 2 or sp 3 carbon formation. The commonly observed Raman features corresponding to alternative carbon phases were not detected. Furthermore, no Sn droplets were visible in scanning electron microscopy, illustrating the synergy in C and Sn incorporation and the potential of Ge 1–x–y Sn x C y active regions for silicon-based lasers. 
    more » « less
  2. ; ; ; ; (, Journal of Vacuum Science & Technology B)
    Carbon is a common contaminant in oxide thin film semiconductors that can affect important properties such as the work function, surface chemistry, and electrical conductivity. In this work, carbon impurities in sputtered anatase titania (TiO2) and indium tin oxide (ITO) thin films were investigated using Raman and optical transmission spectroscopy. Annealing in a rough vacuum yielded carbon precipitates, which have characteristic disordered and graphitic carbon Raman signatures. Irradiation by a 532 nm laser in the ambient air was effective in removing the carbon precipitates; in the case of ITO, no trace of carbon could be observed in the Raman spectra following irradiation. The combination of vacuum annealing and laser irradiation could provide a practical means for reducing carbon impurities in thin films. 
    more » « less
  3. ; (, Journal of Applied Physics)
    Nucleation is important in processing of good quality diamond crystals and textured thin films by microwave plasma enhanced chemical vapor deposition (MPECVD) for applications in quantum devices and systems. Bias-enhanced nucleation (BEN) is one approach for diamond nucleation in situ during MPECVD. However, the mechanism of diamond nucleation by BEN is not well understood. This paper describes results on the nucleation of diamond within a carbon film upon application of electric field during the BEN-facilitated MPECVD process. The nature of the diamond film and nuclei formed is characterized by SEM (scanning electron microscopy), Raman spectroscopy, and high-resolution transmission electron microscopy (HRTEM). The HRTEM images and associated diffraction patterns of the nucleation layer show that the diamond nuclei are formed within the carbon film close to the Si (100) substrate surface under the influence of microwaves and electric fields that lead to formation of the textured diamond film and crystal upon further growth. These results are expected to develop diamond films of optimum quality containing a nitrogen-vacancy center for application in quantum systems. 
    more » « less
  4. ; (, The Composites and Advanced Materials Expo. CAMX Conference Proceedings)
    Carbon fibers (CFs) are an important engineering material due to their superior mechanical, electrical, and thermal properties. Majority of them are produced from the thermal conversion of polyacrylonitrile (PAN)-based fibers. In order to promote the CF manufacturing speed and offer the possibility to control the microstructure of the fibers, an alternative technology for carbonization of stabilized PAN fiber are explored by laser processing technology. In this work, we investigated the relationship between the laser process and the properties of fibers. Laser irradiation introduces the structural changes in the stabilized PAN fibers. The appearance of D band and G band in Raman spectrum verifies the existence of graphite structures in the laser scanned fibers. The characteristic peaks in FTIR disappear when the high laser energy condition is engaged, which indicates diminishing of non-carbon bonds. Laser treatment also introduces an obvious shrinkage in fiber diameter. The condition of laser irradiation could influence the electrical and mechanical properties of fibers. A new approach to convert stabilized PAN fiber into carbon fiber was demonstrated. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Energy Materials)
    Abstract Lithium/fluorinated graphite (Li/CFx) primary batteries show great promise for applications in a wide range of energy storage systems due to their high energy density (>2100 Wh kg–1) and low self‐discharge rate (<0.5% per year at 25 °C). While the electrochemical performance of the CFxcathode is indeed promising, the discharge reaction mechanism is not thoroughly understood to date. In this article, a multiscale investigation of the CFxdischarge mechanism is performed using a novel cathode structure to minimize the carbon and fluorine additives for precise cathode characterizations. Titration gas chromatography, X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, scanning electron microscopy, cross‐sectional focused ion beam, high‐resolution transmission electron microscopy, and scanning transmission electron microscopy with electron energy loss spectroscopy are utilized to investigate this system. Results show no metallic lithium deposition or intercalation during the discharge reaction. Crystalline lithium fluoride particles uniformly distributed with <10 nm sizes into the CFxlayers, and carbon with lower sp2content similar to the hard‐carbon structure are the products during discharge. This work deepens the understanding of CFxas a high energy density cathode material and highlights the need for future investigations on primary battery materials to advance performance. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email