An official website of the United States government
Over the years, honeypots emerged as an important security tool to understand attacker intent and deceive attackers to spend time and resources. Recently, honeypots are being deployed for Internet of things (IoT) devices to lure attackers, and learn their behavior. However, most of the existing IoT honeypots, even the high interaction ones, are easily detected by an attacker who can observe honeypot traffic due to lack of real network traffic originating from the honeypot. This implies that, to build better honeypots and enhance cyber deception capabilities, IoT honeypots need to generate realistic network traffic flows. To achieve this goal, we propose a novel deep learning based approach for generating traffic flows that mimic real network traffic due to user and IoT device interactions.A key technical challenge that our approach overcomes is scarcity of device-specific IoT traffic data to effectively train a generator.We address this challenge by leveraging a core generative adversarial learning algorithm for sequences along with domain specific knowledge common to IoT devices.Through an extensive experimental evaluation with 18 IoT devices, we demonstrate that the proposed synthetic IoT traffic generation tool significantly outperforms state of the art sequence and packet generators in remaining indistinguishable from real traffic even to an adaptive attacker.
more »
« less
Deceptive Environments for Cybersecurity Defense on Low-power Devices
The ever-evolving nature of botnets has made constant malware collection an absolute necessity for security researchers in order to analyze and investigate the latest, nefarious means by which bots exploit their targets and operate in concert with each other and their bot master. In that effort of ongoing data collection, honeypots have established themselves as a curious and useful tool for deception-based security. Low-powered devices, such as the Raspberry Pi, have found a natural home with some categories of honeypots and are being embraced by the honeypot community. Due to the low cost of these devices, new techniques are being explored to employ multiple honeypots within a network to act as sensors, collecting activity reports and captured malicious binaries to back-end servers for later analysis and network threat assessments. While these techniques are just beginning to gain their stride within the security community, they are held back due to the minimal amount of deception a traditional honeypot on a low-powered device is capable of delivering. This thesis seeks to make a preliminary investigation into the viability of using Linux containers to greatly expand the deception possible on low-powered devices by providing isolation and containment of full system images with minimal resource overhead. It is argued that employing Linux containers on low-powered device honeypots enables an entire category of honeypots previously unavailable on such hardware platforms. In addition to granting previously unavailable interaction with honeypots on Raspberry Pis, the use of Linux containers grants unique advantages that have not previously been explored by security researchers, such as the ability to defeat many types of virtual environment and monitoring tool detection methods.
more »
« less
- Award ID(s):
- 1565314
- PAR ID:
- 10111171
- Date Published:
- Journal Name:
- Virginia Tech Theses
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Container systems (e.g., Docker) provide a well-defined, lightweight, and versatile foundation to streamline the process of tool deployment, to provide a consistent and repeatable experimental interface, and to leverage data centers in the global cloud infrastructure as measurement vantage points. However, the virtual network devices commonly used to connect containers to the Internet are known to impose latency overheads which distort the values reported by measurement tools running inside containers. In this study, we develop a tool called MACE to measure and remove the latency overhead of virtual network devices as used by Docker containers. A key insight of MACE is the fact that container functions all execute in the same kernel. Based on this insight, MACE is implemented as a Linux kernel module using the trace event subsystem to measure latency along the network stack code path. Using CloudLab, we evaluate MACE by comparing the ping measurements emitted from a slim-ping container to the ones emitted using the same tool running in the bare metal machine under varying traffic loads. Our evaluation shows that the MACE-adjusted RTT measurements are within 20 µs of the bare metal ping RTTs on average while incurring less than 25 µs RTT perturbation. We also compare RTT perturbation incurred by MACE with perturbation incurred by the built-in ftrace kernel tracing system and find that MACE incurs less perturbation.more » « less
-
The importance to our society of emergency network communications cannot be underestimated. The loss of communication and network systems in a state of emergency denies victims of disaster and city emergency response teams critical information about the crisis. It is essential to restore communication systems and service in order to ensure continuous and efficient emergency operations. This paper presents a cloud-based cost-effective emergency network management system to provide dynamic network services. We have developed a network application to enable users to access the Internet during an emergency. The application is ready to immediately restore lost connectivity through economical embedded systems and UAVs. We implement our prototypes based on Resin.io, a framework that utilizes Linux containers on IoT(Internet of Things) devices to deploy applications. We evaluate our systems on Raspberry Pi, a popular embedded system. We demonstrate the feasibility of our proposed system, showing that it is an economical infrastructure that it can successfully be used for an emergency network to replace a demolished network infrastructure.more » « less
-
Smart home electronic devices invisibly collect, process, and exchange information with each other and with remote services, often without a home occupants' knowledge or consent. These devices may be mobile or fixed and may have wireless or wired network connections. Detecting and identifying all devices present in a home is a necessary first step to control the flow of data, but there exists no universal mechanism to detect and identify all electronic devices in a space. In this paper we present ICED (Identification and Classification of Electronic Devices), a system that can (i) identify devices from a known set of devices, and (ii) detect the presence of previously unseen devices. ICED, based on harmonic radar technology, collects measurements at the first harmonic of the radar's transmit frequency. We find that the harmonic response contains enough information to infer the type of device. It works when the device has no wireless network interface, is powered off, or attempts to evade detection. We evaluate performance on a collection of 17 devices and find that by transmitting a range of frequencies we correctly identify known devices with 97.6% accuracy and identify previously unseen devices as ‘unknown’ with 69.0% balanced accuracy.more » « less
-
Recent years have witnessed the rise of Internet-of-Things (IoT) based cyber attacks. These attacks, as expected, are launched from compromised IoT devices by exploiting security flaws already known. Less clear, however, are the fundamental causes of the pervasiveness of IoT device vulnerabilities and their security implications, particularly in how they affect ongoing cybercrimes. To better understand the problems and seek effective means to suppress the wave of IoT-based attacks, we conduct a comprehensive study based on a large number of real-world attack traces collected from our honeypots, attack tools purchased from the underground, and information collected from high-profile IoT attacks. This study sheds new light on the device vulnerabilities of today's IoT systems and their security implications: ongoing cyber attacks heavily rely on these known vulnerabilities and the attack code released through their reports; on the other hand, such a reliance on known vulnerabilities can actually be used against adversaries. The same bug reports that enable the development of an attack at an exceedingly low cost can also be leveraged to extract vulnerability-specific features that help stop the attack. In particular, we leverage Natural Language Processing (NLP) to automatically collect and analyze more than 7,500 security reports (with 12,286 security critical IoT flaws in total) scattered across bug-reporting blogs, forums, and mailing lists on the Internet. We show that signatures can be automatically generated through an NLP-based report analysis, and be used by intrusion detection or firewall systems to effectively mitigate the threats from today's IoT-based attacks.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
