An official website of the United States government
Breastfeeding provides both nutrients and immunities necessary for infant growth. Understanding the biomechanics of breastfeeding requires capturing both positive and negative pressures exerted by infants on the breast. This clinical experimental work utilizes thin, flexible pressure sensors to capture the positive oral pressures of 7 mother-infant dyads during breastfeeding while simultaneously measuring vacuum pressures and imaging of the infants oral cavity movement via ultrasound. Methods for denoising signals and evaluating ultrasound images are discussed. Changes and deformations on the nipple are evaluated. The results reveal that pressure from the infant’s maxilla and mandible are evenly distributed in an oscillatory pattern corresponding to the vacuum pressure patterns. Variations in nipple dimensions are considerably smaller than variations in either pressure but the ultrasound shows positive pressure dominates structural changes during breastfeeding. Clinical implications for infant-led milk expression and data processing are discussed.
more »
« less
Capturing Nipple Deformation and Peripheral Pressure on the Areola During Breastfeeding
The interaction between breast and infant's mouth, during breastfeeding, is a complex dynamic mechanism. It remains unclear which factor plays the key role in removing milk from the breast: the intra-cavity vacuum pressure or the compressive pressure of the tongue. While there are extensive clinical data on collection of vacuum pressure, limited data exist for the positive pressure values on the breast areola exerted by infant's mouth. The goal of this study is to use a methodology to capture these positive pressure values exerted by maxilla and mandible on the breast areola during breastfeeding. In this study, the positive and negative (vacuum) pressure values are obtained simultaneously on seven lactating mothers successfully. Parallel to the pressure data measurements, ultrasound images are captured and processed to reveal the nipple deformations and the displacements of infants' tongues and jaw movements during breastfeeding. At the end, motivated by the significant differences in composition between the tissue of the breast and the nipple-areola complex, the Poisson's ratio values of the lactating nipples are obtained using these deformation measurements.
more »
« less
- Award ID(s):
- 1454334
- PAR ID:
- 10112570
- Date Published:
- Journal Name:
- Journal of Biomechanical Engineering
- ISSN:
- 0148-0731
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract This study presents a 3-D Fluid-Structure Interaction (FSI) simulation of breastfeeding mechanism to provide a better understanding of the milk flow behavior in the ductal system of the human breast as the breast interacts with the infant's oral cavity. The breast geometry consists of one lobe with three-bifurcation levels. The boundary conditions include: (1) The intraoral vacuum pressure, obtained from the clinical measurements, (2) Dynamic motion of the tongue, nipple, and jaw (maxilla and mandible) motion captured by ultrasound images. Simulation is conducted from the instance of latching and continues for two cycles of periodic tongue motion and in various boundary conditions and mouthing positions. The results from the simulation show that milk removal is not only due to the negative pressure applied by the infant sucking, but also the tongue movement and mouthing and squeezing of nipple and breast, i.e. a positive force deforming the nipple is responsible for the expression of milk. The developed model can contribute to a better understanding of breastfeeding complications due to physical infant and/or breast abnormalities and the design of medical devices such as artificial teats and breast pumps.more » « less
-
Background Limited data are available regarding the balance of risks and benefits from human milk and/or breastfeeding during and following maternal infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Objective To investigate whether SARS-CoV-2 can be detected in milk and on the breast after maternal coronavirus disease 2019 (COVID-19) diagnosis; and characterize concentrations of milk immunoglobulin (Ig) A specific to the SARS-CoV-2 spike glycoprotein receptor binding domain (RBD) during the 2 months after onset of symptoms or positive diagnostic test. Methods Using a longitudinal study design, we collected milk and breast skin swabs one to seven times from 64 lactating women with COVID-19 over a 2-month period, beginning as early as the week of diagnosis. Milk and breast swabs were analyzed for SARS-CoV-2 RNA, and milk was tested for anti-RBD IgA. Results SARS-CoV-2 was not detected in any milk sample or on 71% of breast swabs. Twenty-seven out of 29 (93%) breast swabs collected after breast washing tested negative for SARS-CoV-2. Detection of SARS-CoV-2 on the breast was associated with maternal coughing and other household COVID-19. Most (75%; 95% CI, 70-79%; n=316) milk samples contained anti-RBD IgA, and concentrations increased ( P =.02) during the first two weeks following onset of COVID-19 symptoms or positive test. Milk-borne anti-RBD IgA persisted for at least two months in 77% of women. Conclusion Milk produced by women with COVID-19 does not contain SARS-CoV-2 and is likely a lasting source of passive immunity via anti-RBD IgA. These results support recommendations encouraging lactating women to continue breastfeeding during and after COVID-19 illness.more » « less
-
Abstract ObjectiveTo understand community perspectives on the effects of high ambient temperature on the health and wellbeing of neonates, and impacts on post-partum women and infant care in Kilifi. DesignQualitative study using key informant interviews, in-depth interviews and focus group discussions with pregnant and postpartum women (n = 22), mothers-in-law (n = 19), male spouses (n = 20), community health volunteers (CHVs) (n = 22) and stakeholders from health and government ministries (n = 16). SettingsWe conducted our research in Kilifi County in Kenya’s Coast Province. The area is largely rural and during summer, air temperatures can reach 37˚C and rarely go below 23˚C. Data analysisData were analyzed in NVivo 12, using both inductive and deductive approaches. ResultsHigh ambient temperature is perceived by community members to have direct and indirect health pathways in pregnancy and postpartum periods, including on the neonates. The direct impacts include injuries on the neonate’s skin and in the mouth, leading to discomfort and affecting breastfeeding and sleeping. Participants described babies as “having no peace”. Heat effects were perceived to be amplified by indoor air pollution and heat from indoor cooking fires. Community members believed that exclusive breastfeeding was not practical in conditions of extreme heat because it lowered breast milk production, which was, in turn, linked to a low scarcity of food and time spend by mothers away from their neonates performing household chores. Kangaroo Mother Care (KMC) was also negatively affected. Participants reported that postpartum women took longer to heal in the heat, were exhausted most of the time and tended not to attend postnatal care. ConclusionsHigh ambient temperatures affect postpartum women and their neonates through direct and indirect pathways. Discomfort makes it difficult for the mother to care for the baby. Multi-sectoral policies and programs are required to mitigate the negative impacts of high ambient temperatures on maternal and neonatal health in rural Kilifi and similar settings.more » « less
-
Radiolysis is a complex phenomenon in which molecules subjected to ionizing radiation form new chemical species. Electron-beam irradiation has proven to be a versatile approach for significantly altering materials’ properties and forms the basis for electron-beam lithography using both organic and inorganic resists. Electron-beam exposure is normally carried out under high vacuum conditions to reduce contamination and allow for unhindered interaction between the electrons and the resist material. Exposure under an ambient gas at sub-atmospheric pressures has been found to provide a distinct mechanism which can be exploited to circumvent some of the challenges associated with material processing and significantly alter or enhance material’s properties. This dissertation discusses the modifications in standard electron beam resist characteristics during gas assisted electron beam pattering. We studied the effect of water vapor pressure on positive and negative tone electron-beam patterning of poly methyl methacrylate (PMMA). For both positive and negative-tone patterning, it was found that increasing the water vapor pressure considerably improved the contrast of PMMA. As expected from electron scattering in a gas, the clearing dosage for positive tone patterning gradually increased with vapor pressure. Also, electron scattering in water vapor yielded a substantially larger clear region around the negative-tone patterns. This effect could be useful for increasing the range of the developed region around cross-linked PMMA far beyond the backscattered electron range. As a result, VP-EBL for PMMA offers a new means of tuning clearing/onset dose and contrast while enabling more control over the size of the cleared region around negative-tone patterns. We provide a novel way to simultaneously tune the emission wavelength and enhance the fluorescence intensity of fluorophores formed by irradiating polystyrene with a focused electron beam under various gaseous environments. We studied the effect of electron dose and gas pressure on the emission spectra and photon yield of irradiated polystyrene film on a variety of substrates. Up to 10x enhancement in fluorescence yield was achieved using water vapor and the peak emission wavelength tuned over a wide wavelength range. Thus, localized electron-beam synthesis of fluorophores in polystyrene can be controlled by both dose and by ambient water-vapor pressure. This technique could enable innovative approaches to photonics where fluorophores with tunable emission properties can be locally introduced by electron-beam patterning. We also studied the effect of ambient gases on contrast and resolution of PMMA on conducting and insulating substrates. E-beam exposures were conducted under vacuum conditions and 1 mbar of water vapor, helium, nitrogen and argon to study their effect on contrast and resolution of PMMA on silicon, fused silica and soda lime glass substrates. On silicon, exposure under water vapor yielded contrast values significantly higher than vacuum exposure, consistent with our previous work. However, exposure under helium yielded slightly improved contrast compared to vacuum exposure. On insulating substrates exposure under helium environment yielded contrast values significantly higher compared to vacuum exposure. The clearing dose was found to increase with the gases’ molecular weight and proton number, consistent with the increase in scattering cross-section. The improved contrast and sensitivity (dose to clear) of PMMA under helium motivated us to study the resolution under various gases. Resolution testing indicated that despite the lower clearing dose, helium still exhibited the best resolution with 25-nm half-pitch dense lines and spaces clearly resolved on soda lime glass. Thus, VP-EBL of PMMA under helium yields higher sensitivity and contrast on insulating substrates without sacrificing resolution.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4043665
