skip to main content


Title: Effect of Fabry-Perot Cavities on Concentration Quenching
We show that concentration quenching of emission of dye molecules – an energy transfer to quenching centers – is inhibited in subwavelength Fabry-Perot cavities (or metal-insulator-metal, MIM, waveguides).  more » « less
Award ID(s):
1646789
NSF-PAR ID:
10126210
Author(s) / Creator(s):
Date Published:
Journal Name:
Cleo
ISSN:
1993-5730
Page Range / eLocation ID:
JTh2A.20
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    Carbon dots (CDots) are defined as surface-passivated small carbon nanoparticles, with the effective passivation generally achieved by organic functionalization. Photoexcited CDots are both potent electron donors and acceptors, and their characteristic bright and colorful fluorescence emissions make them excellent fluorescence sensors for organic analytes and metal ions. For the latter extraordinarily low detection limits based on extremely efficient quenching of fluorescence intensities by the targeted metal cations have been observed and reported in the literature. However, all of the dot samples in those reported studies were made from “one-pot” carbonization of organic precursors mostly under rather mild processing conditions, unlikely to be sufficient for the required level of carbonization. Those dot samples should therefore be more appropriately considered as “nano-carbon/organic hybrids”, characterized structurally as being highly porous and spongy, which must be playing a dominating role in the reported sensing results. In this study, we compared the dot samples from carbonization syntheses under similarly mild and also more aggressive processing conditions with the classically defined and structured CDots for the fluorescence sensing of copper( ii ) cations in aqueous solutions. The observed dramatic decoupling between quenching results for fluorescence intensities and lifetimes of the carbonization samples, with the former being extraordinary and the latter within the diffusion controlled limit, suggested that the quenching of fluorescence intensities was greatly affected by the higher local quencher concentrations than the bulk associated with the porous and spongy sample structures, especially for the sample from carbonization under too mild processing conditions. The major differences between the classical CDots and the nano-carbon/organic hybrids are highlighted, and the tradeoffs between sensitivity and accuracy or reproducibility in the use of the latter for fluorescence sensing are discussed. 
    more » « less
  2. Nanoimprinting of gold has the potential to make significant impact in the fabrication of miniaturized devices including optical devices, photonic crystals and biochemical sensors. The deformation behavior and recrystallization of gold structures has profound impact on the accurate replication of the imprinted pattern. An important step in the nanoimprint lithography (NIL) process is the cooling of the mold and resist assembly to room temperatures. The rate of cooling, commonly termed as quenching determines the final shape of the NIL features. Molecular dynamics simulations were implemented to study the nanoimprinting of gold substrates using a silicon mold. Simulations were conducted at room temperature (298 K), gold recrystallization (473K) and melting point (1000K) temperatures. The effect of different cooling rates (quenching) on the deformation behavior and spring back of gold was investigated. These include 0.01ns, 0.05ns, and 0.2ns time steps of quenching at 1fs per time step. The modified embedded atom method (MEAM) potential was used for the system molecules. Fast cooling at 298 K and 473 K whereas, intermediate cooling at 1000 K resulted in good pattern transfer. High fidelity nanoscale features were achieved with a gradient cooling proportional to the initial heating temperatures. The findings of this research provide insight on the effect of quenching in the material deformation and spring back during direct metal nanoimprinting. 
    more » « less
  3. We show that concentration quenching of emission of dye molecules – an energy transfer to quenching centers – is inhibited in subwavelength Fabry-Perot cavities (or metal-insulator-metal, MIM, waveguides). 
    more » « less
  4. We have studied emission kinetics in dye-doped polymeric films (HITC:PMMA), deposited on top of glass and silver and embedded in Fabry–Perot cavities (metal-insulator-metal waveguides). For highly doped films on glass, we observed strong concentration quenching, as evidenced by a dramatic shortening of the emission kinetics, consistent with our previous studies. However, for the same dye-doped films on top of silver, slower emission kinetics were observed despite the high decay rates of individual dye molecules near the metallic surface. The concentration quenching rates in Fabry–Perot cavities were nearly identical to those of HITC:PMMA films deposited on top of silver. These findings are explained within a theoretical model for the inhibition of Förster energy transfer near a metallic surface. Furthermore, the emission kinetics of the dye-doped films on top of silver were approximately single exponential—consistent with the strong coupling of excited molecules with propagating surface plasmons.

     
    more » « less
  5. null (Ed.)
    We have studied emission kinetics of HITC laser dye on top of glass, smooth Au films, and randomly structured porous Au nanofoams. The observed concentration quenching of luminescence of highly concentrated dye on top of glass (energy transfer to acceptors) and the inhibition of the concentration quenching in vicinity of smooth Au films were in accord with our recent findings. Intriguingly, the emission kinetics recorded in different local spots of the Au nanofoam samples had a spread of the decay rates, which was large at low dye concentrations and became narrower with increase of the dye concentration. We infer that in different subvolumes of Au nanofoams, HITC molecules are coupled to the nanofoams weaker or stronger. The inhibition of the concentration quenching in Au nanofoams was stronger than on top of smooth Au films. This was true for all weakly and strongly coupled subvolumes contributing to the spread of the emission kinetics. The experimental observations were explained using theoretical model accounting for change in the Förster radius caused by the strong energy transfer to metal. 
    more » « less