An official website of the United States government
Abstract The solar corona is much hotter than lower layers of the solar atmosphere—the photosphere and chromosphere. The coronal temperature is up to 1 MK in quiet Sun areas, while up to several megakelvins in active regions, which implies a key role of the magnetic field in coronal heating. This means that understanding coronal heating requires reliable modeling of the underlying 3D magnetic structure of an active region validated by observations. Here, we employ synergy between 3D modeling, optically thick gyroresonant microwave emission, and optically thin EUV emission to (i) obtain and validate the best magnetothermal model of the active region and (ii) disentangle various components of the EUV emission known as diffuse component, bright loops, open-field regions, and “moss” component produced at the transition region. Surprisingly, the best thermal model corresponds to high-frequency energy release episodes, similar to a steady-state heating. Our analysis did not reveal significant deviations of the elemental abundances from the standard coronal values.
more »
« less
Data-driven model of the solar corona above an active region
Aims . We aim to reproduce the structure of the corona above a solar active region as seen in the extreme ultraviolet (EUV) using a three-dimensional magnetohydrodynamic (3D MHD) model. Methods . The 3D MHD data-driven model solves the induction equation and the mass, momentum, and energy balance. To drive the system, we feed the observed evolution of the magnetic field in the photosphere of the active region AR 12139 into the bottom boundary. This creates a hot corona above the cool photosphere in a self-consistent way. We synthesize the coronal EUV emission from the densities and temperatures in the model and compare this to the actual coronal observations. Results . We are able to reproduce the overall appearance and key features of the corona in this active region on a qualitative level. The model shows long loops, fan loops, compact loops, and diffuse emission forming at the same locations and at similar times as in the observation. Furthermore, the low-intensity contrast of the model loops in EUV matches the observations. Conclusions . In our model the energy input into the corona is similar as in the scenarios of fieldline-braiding or flux-tube tectonics, that is, energy is transported to the corona through the driving of the vertical magnetic field by horizontal photospheric motions. The success of our model shows the central role that this process plays for the structure, dynamics, and heating of the corona.
more »
« less
- Award ID(s):
- 1804048
- PAR ID:
- 10127180
- Date Published:
- Journal Name:
- Astronomy & Astrophysics
- Volume:
- 624
- ISSN:
- 0004-6361
- Page Range / eLocation ID:
- L12
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract In this paper, we report the observed temporal correlation between extreme-ultraviolet (EUV) emission and magneto-acoustic oscillations in an EUV moss region, which is the footpoint region only connected by magnetic loops with million-degree plasma. The result is obtained from a detailed multi-wavelength data analysis of the region with the purpose of resolving fine-scale mass and energy flows that come from the photosphere, pass through the chromosphere and finally heat the solar transition region or the corona. The data set covers three atmospheric levels on the Sun, consisting of high-resolution broad-band imaging at TiO 7057 Å and the line of sight magnetograms for the photosphere, high-resolution narrow-band images at helium i 10830 Å for the chromosphere and EUV images at 171 Å for the corona. The 10830 Å narrow-band images and the TiO 7057 Å broad-band images are from a much earlier observation on 2012 July 22 with the 1.6 meter aperture Goode Solar Telescope (GST) at Big Bear Solar Observatory (BBSO) and the EUV 171 Å images and the magnetograms are from observations made by Atmospheric Imaging Assembly (AIA) or Helioseismic and Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO). We report the following new phenomena: (1) Repeated injections of chromospheric material appearing as 10830 Å absorption are squirted out from inter-granular lanes with a period of ∼ 5 minutes. (2) EUV emissions are found to be periodically modulated with similar periods of ∼ 5 minutes. (3) Around the injection area where 10830 Å absorption is enhanced, both EUV emissions and strength of the magnetic field are remarkably stronger. (4) The peaks on the time profile of the EUV emissions are found to be in sync with oscillatory peaks of the stronger magnetic field in the region. These findings may give a series of strong evidences supporting the scenario that coronal heating is powered by magneto-acoustic waves.more » « less
-
Abstract The solar corona is much hotter than the photosphere and chromosphere, but the physical mechanism responsible for heating the coronal plasma remains unidentified. The thermal microwave emission, which is produced in a strong magnetic field above sunspots, is a promising but barely exploited tool for studying the coronal magnetic field and plasma. We analyzed the microwave observations of eight solar active regions obtained with the Siberian Radioheliograph in the years 2022–2024 in the frequency range of 6–12 GHz. We produced synthetic microwave images based on various coronal heating models, and determined the model parameters that provided the best agreement with the observations. The observations and simulations strongly favor either a steady-state (continuous) plasma heating process or high-frequency heating by small energy release events with a short cadence. The average magnetic field strength in a coronal loop was found to decrease with the loop length, following a scaling law with the most probable index of about −0.55. In the majority of cases, the estimated volumetric heating rate was weakly dependent on the magnetic field strength and decreased with the coronal loop length following a scaling law with an index of about −2.5. Among the known theoretical heating mechanisms, the model based on wave transmission or reflection in coronal loops acting as resonance cavities was found to provide the best agreement with the observations. The obtained results did not demonstrate a significant dependence on the emission frequency in the considered range.more » « less
-
Abstract Mutual conversion of various kinds of magnetohydrodynamic (MHD) waves can have profound impacts on wave propagation, energy transfer, and heating of the solar chromosphere and corona. Mode conversion occurs when an MHD wave travels through a region where the Alfvén and sound speeds are equal (e.g., a 3D magnetic null point). Here we report the direct extreme ultraviolet (EUV) imaging of mode conversion from a fast-mode to a slow-mode MHD wave near a 3D null point using Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) observations. An incident fast EUV wavefront associated with an adjacent eruptive flare propagates laterally through a neighboring pseudostreamer. Shortly after the passage of the fast EUV wave through the null point, a slow-mode wave appears near the null that propagates upward along the open structures and simultaneously downward along the separatrix encompassing the fan loops of the pseudostreamer base. These observations suggest the existence of mode conversion near 3D nulls in the solar corona, as predicted by theory and MHD simulations. Moreover, we observe decaying transverse oscillations in both the open and closed structures of the pseudostreamer, along with quasiperiodic type III radio bursts indicative of repetitive episodes of electron acceleration.more » « less
-
Abstract This work analyzes the Hall magnetohydrodynamics (HMHD) and magnetohydrodynamics (MHD) numerical simulations of a flaring solar active region as a test bed while idealizing the coronal Alfvén speed to be less by two orders of magnitude. HMHD supports faster magnetic reconnection and shows richer complexity in magnetic field line evolution compared to the MHD. The magnetic reconnections triggering the flare are explored by numerical simulations augmented with relevant multiwavelength observations. The initial coronal magnetic field is constructed by non-force-free extrapolation of photospheric vector magnetic field. Magnetic structure involved in the flare is identified to be a flux rope, with its overlying magnetic field lines constituting the quasi-separatrix layers (QSLs) along with a three-dimensional null point and a null line. Compared to the MHD simulation, the HMHD simulation shows a higher and faster ascent of the rope together with the overlying field lines, which further reconnect at the QSL located higher up in the corona. The footpoints of the field lines match better with the observations for the HMHD case, with the central part of the flare ribbon located at the chromosphere. Additionally, field lines are found to rotate in a circular pattern in the HMHD, whereas no such rotation is seen in the MHD results. Interestingly, plasma is also observed to be rotating in a cospatial chromospheric region, which makes the HMHD simulation more credible. Based on the aforementioned agreements, HMHD simulation is found to agree better with observations and thus opens up a novel avenue to explore.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1051/0004-6361/201935385
