The relative significance of various geodynamic mechanisms that drive supercontinent breakup is unclear. A previous analysis of extensional stress during supercontinent breakup demonstrated the importance of the plume‐push force relative to the dragging force of subduction retreat. Here, we extend the analysis to basal traction (shear stress) and cross‐lithosphere integrations of both extensional and shear stresses, aiming to understand more clearly the relevant importance of these mechanisms in supercontinent breakup. More importantly, we evaluate the effect of preexisting orogens (mobile belts) in the lithosphere on supercontinent breakup process. Our analysis suggests that a homogeneous supercontinent has extensional stress of 20–50 MPa in its interior (<40° from the central point). When orogens are introduced, the extensional stress in the continents focuses on the top 80‐km of the lithosphere with an average magnitude of ~160 MPa, whereas at the margin of the supercontinent the extensional stress is 5–50 MPa. In both homogeneous and orogeny‐embedded cases, the subsupercontinent mantle upwellings act as the controlling factor on the normal stress field in the supercontinent interior. Compared with the extensional stress, shear stress at the bottom of the supercontinent is 1–2 order of magnitude smaller (0–5 MPa). In our two end‐member models, the breakup of a supercontinent with orogens can be achieved after the first extensional stress surge, whereas for a hypothetical supercontinent without orogens it starts with more diffused local thinning of the continental lithospheric before the breakup, suggesting that weak orogens play a critical role in the dispersal of supercontinents.
- Award ID(s):
- 1645245
- NSF-PAR ID:
- 10127684
- Date Published:
- Journal Name:
- Geochemistry geophysics geosystems
- Volume:
- 20
- ISSN:
- 1525-2027
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract The occurrence of plate tectonic processes on Earth during the Paleoproterozoic is supported by ca. 2.2–1.8 Ga subduction‐collision orogens associated with the assembly of the Columbia‐Nuna supercontinent. Subsequent supercontinent breakup is evidence by global ca. 1.8–1.6 Ga large igneous provinces. The North China craton is notable for containing Paleoproterozoic orogens along its margins, herein named the Northern Margin orogen, yet the nature and timing of orogenic and extensional processes of these orogens and their role in the supercontinent cycle remain unclear. In this contribution, we present new field observations, U‐Pb zircon and baddeleyite geochronology dates, and major/trace‐element and isotope geochemical analyses from the northern margin of the North China craton that detail its Paleoproterozoic tectonic and magmatic history. Specifically, we record the occurrence of ca. 2.2–2.0 Ga magmatic arc rocks, ca. 1.9–1.88 Ga tectonic mélange and mylonitic shear zones, and folded lower Paleoproterozoic strata. These rocks were affected by ca. 1.9–1.8 Ga granulite‐facies metamorphism and ca. 1.87–1.78 Ga post‐collisional, extension‐related magmatism along the cratonal northern margin. We interpret that the generation and emplacement of these rocks, and the coupled metamorphic and magmatic processes, were related to oceanic subduction and subsequent continent‐continent collision during the Paleoproterozoic. The occurrence of ca. 1.77–1.73 Ga mafic dykes and ca. 1.75 Ga mylonitic shear zones along the northern margin of the North China craton may have been related to a regional mantle plume event. Our results are consistent with modern style plate tectonics, including oceanic subduction‐related plate convergence and continent‐continent collision, operating in the Paleoproterozoic.
-
A microstructural and thermochronometric analysis of the Coyote Mountains detachment shear zone provides new insight into the collapse of the southern North American Cordillera. The Coyote Mountains is a metamorphic core complex that makes up the northern end of the Baboquivari Mountains in southern Arizona. The Baboquivari Mountains records several episodes of crustal shortening and thickening, and regional metamorphism, including the Late Cretaceous-early Paleogene Laramide orogeny which is locally expressed by the Baboquivari thrust fault. Thrusting and shortening were accompanied by magmatic activity recorded by intrusion of Paleocene muscovite-biotite-garnet peraluminous granites such as the ~58 Ma Pan Tak Granite, interpreted as anatectic melts representing the culmination of the Laramide orogeny. Following Laramide crustal shortening, the northern end of the Baboquivari Mountains was exhumed along a top-to-the-north detachment shear zone, which resulted in the formation of the Coyote Mountains metamorphic core complex. Structural and microstructural analysis show that the detachment shear zone evolved under a strong component of non-coaxial (simple shear) deformation, at deformation conditions of ~450 ± 50°C, under a differential stress of ~60 MPa, and a strain rate of 1.5 ×10-11 s-1 to 5.0 × 10-13 s-1 at depth of ~11–14 km. Detailed 40Ar/39Ar geochronology of biotite and muscovite, in the context of the deformation conditions determined by quartz microstructures, suggests that the mylonitization associated with the formation of the Coyote Mountains metamorphic core complex started at ~29 Ma (early Oligocene). Apatite fission track ages indicate that the footwall of the Coyote Mountains metamorphic core complex experienced rapid exhumation to the upper crust by ~24 Ma. The fact that mylonitization and rapid extensional exhumation post-dates Laramide thickening by ~30 Myr indicates that crustal thickness alone was insufficient to initiate extensional tectonic and required an additional driving force. The timing of mylonitization and rapid exhumation documented here and in other MCCs are consistent with the hypothesis that slab rollback and the effect of a slab window trailing the Mendocino Triple Junction have been critical in driving the development of the MCCs of the southwest.more » « less
-
Abstract Carbonate sediments play a prominent role on the global geological stage as they store more than $$60\%$$ 60 % of world’s oil and $$40\%$$ 40 % of world’s gas reserves. Prediction of the deformation and failure of porous carbonates is, therefore, essential to minimise reservoir compaction, fault reactivation, or wellbore instability. This relies on our understanding of the mechanisms underlying the observed inelastic response to fluid injection or deviatoric stress perturbations. Understanding the impact of deformation/failure on the hydraulic properties of the rock is also essential as injection/production rates will be affected. In this work, we present new experimental results from triaxial deformation experiments carried out to elucidate the behaviour of a porous limestone reservoir analogue (Savonnières limestone). Drained triaxial and isotropic compression tests were conducted at five different confining pressures in dry and water-saturated conditions. Stress–strain data and X-ray tomography images of the rock indicate two distinct types of deformation and failure regimes: at low confinement (10 MPa) brittle failure in the form of dilatant shear banding was dominant; whereas at higher confinement compaction bands orthogonal to the maximum principal stress formed. In addition to the pore pressure effect, the presence of water in the pore space significantly weakened the rock, thereby shrinking the yield envelope compared to the dry conditions, and shifted the brittle–ductile transition to lower effective confining pressures (from 35 MPa to 29 MPa). Finally, permeability measurements during deformation show a reduction of an order of magnitude in the ductile regime due to the formation of the compaction bands. These results highlight the importance of considering the role of the saturating fluid in the brittle–ductile response of porous rocks and elucidate some of the microstructural processes taking place during this transition.more » « less
-
more » « less
Abstract The breakup of supercontinent Pangea occurred ∼200 Ma forming the Eastern North American Margin (ENAM). Yet, the precise timing and mechanics of breakup and onset of seafloor spreading remain poorly constrained. We investigate the relict lithosphere offshore eastern North America using ambient‐noise Rayleigh‐wave phase velocity (12–32 s) and azimuthal anisotropy (17–32 s) at the ENAM Community Seismic Experiment (CSE). Incorporating previous constraints on crustal structure, we construct a shear velocity model for the crust and upper ∼60 km of the mantle beneath the ENAM‐CSE. A low‐velocity lid (
V S of 4.4–4.55 km/s) is revealed in the upper 15–20 km of the mantle that extends ∼200 km from the margin, terminating at the Blake Spur Magnetic Anomaly (BSMA). East of the BSMA, velocities are fast (>4.6 km/s) and characteristic of typical oceanic mantle lithosphere. We interpret the low‐velocity lid as stretched continental mantle lithosphere embedded with up to ∼15% retained gabbro. This implies that the BSMA marks successful breakup and onset of seafloor spreading ∼170 Ma, consistent with ENAM‐CSE active‐source studies that argue for breakup ∼25 Myr later than previously thought. We observe margin‐parallel Rayleigh‐wave azimuthal anisotropy (2%–4% peak‐to‐peak) in the lithosphere that approximately correlates with absolute plate motion (APM) at the time of spreading. We hypothesize that lithosphere formed during ultra‐slow seafloor spreading records APM‐modified olivine fabric rather than spreading‐parallel fabric typical of higher spreading rates. This work highlights the importance of present‐day passive margins for improving understanding of the fundamental rift‐to‐drift transition.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1029/ 2019GC008538
