skip to main content

Explore Research Products in the NSF-PAR

Title: Anatomy of a selectively coassembled β-sheet peptide nanofiber

Peptide self-assembly, wherein molecule A associates with other A molecules to form fibrillar β-sheet structures, is common in nature and widely used to fabricate synthetic biomaterials. Selective coassembly of peptide pairs A and B with complementary partial charges is gaining interest due to its potential for expanding the form and function of biomaterials that can be realized. It has been hypothesized that charge-complementary peptides organize into alternating ABAB-type arrangements within assembled β-sheets, but no direct molecular-level evidence exists to support this interpretation. We report a computational and experimental approach to characterize molecular-level organization of the established peptide pair, CATCH. Discontinuous molecular dynamics simulations predict that CATCH(+) and CATCH(−) peptides coassemble but do not self-assemble. Two-layer β-sheet amyloid structures predominate, but off-pathway β-barrel oligomers are also predicted. At low concentration, transmission electron microscopy and dynamic light scattering identified nonfibrillar ∼20-nm oligomers, while at high concentrations elongated fibers predominated. Thioflavin T fluorimetry estimates rapid and near-stoichiometric coassembly of CATCH(+) and CATCH(−) at concentrations ≥100 μM. Natural abundance13C NMR and isotope-edited Fourier transform infrared spectroscopy indicate that CATCH(+) and CATCH(−) coassemble into two-component nanofibers instead of self-sorting. However,13C–13C dipolar recoupling solid-state NMR measurements also identify nonnegligible AA and BB interactions among a majority of AB pairs. Collectively, these results demonstrate that strictly alternating arrangements of β-strands predominate in coassembled CATCH structures, but deviations from perfect alternation occur. Off-pathway β-barrel oligomers are also suggested to occur in coassembled β-strand peptide systems.

  more » « less
Award ID(s):
1743432
NSF-PAR ID:
10135229
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
Proceedings of the National Academy of Sciences
Date Published:
Journal Name:
Proceedings of the National Academy of Sciences
Volume:
117
Issue:
9
ISSN:
0027-8424
Page Range / eLocation ID:
p. 4710-4717
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ( , Nanoscale)
    null (Ed.)
    Self-assembling peptides have garnered an increasing amount of interest as a functional biomaterial for medical and biotechnological applications. Recently, β-sheet peptide designs utilizing complementary pairs of peptides composed of charged amino acids positioned to impart co-assembly behavior have expanded the portfolio of peptide aggregate structures. Structural characterization of these charge-complementary peptide co-assemblies has been limited. Thus, it is not known how the complementary peptides organize on the molecular level. Through a combination of solid-state NMR measurements and discontinuous molecular dynamics simulations, we investigate the molecular organization of King–Webb peptide nanofibers. KW+ and KW− peptides co-assemble into near stoichiometric two-component β-sheet structures as observed by computational simulations and 13 C– 13 C dipolar couplings. A majority of β-strands are aligned with antiparallel nearest neighbors within the β-sheet as previously suggested by Fourier transform infrared spectroscopy measurements. Surprisingly, however, a significant proportion of β-strand neighbors are parallel. While charge-complementary peptides were previously assumed to organize in an ideal (AB) n pattern, dipolar recoupling measurements on isotopically diluted nanofiber samples reveal a non-negligible amount of self-associated (AA and BB) pairs. Furthermore, computational simulations predict these different structures can coexist within the same nanofiber. Our results highlight structural disorder at the molecular level in a charge-complementary peptide system with implications on co-assembling peptide designs. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al ( , Angewandte Chemie)
    Abstract

    Self‐assembly of proteinaceous biomolecules into functional materials with ordered structures that span length scales is common in nature yet remains a challenge with designer peptides under ambient conditions. This report demonstrates how charged side‐chain chemistry affects the hierarchical co‐assembly of a family of charge‐complementary β‐sheet‐forming peptide pairs known as CATCH(X+/Y−) at physiologic pH and ionic strength in water. In a concentration‐dependent manner, the CATCH(6K+) (Ac‐KQKFKFKFKQK‐Am) and CATCH(6D−) (Ac‐DQDFDFDFDQD‐Am) pair formed either β‐sheet‐rich microspheres or β‐sheet‐rich gels with a micron‐scale plate‐like morphology, which were not observed with other CATCH(X+/Y−) pairs. This hierarchical order was disrupted by replacing D with E, which increased fibril twisting. Replacing K with R, or mutating the N‐ and C‐terminal amino acids in CATCH(6K+) and CATCH(6D−) to Qs, increased observed co‐assembly kinetics, which also disrupted hierarchical order. Due to the ambient assembly conditions, active CATCH(6K+)‐green fluorescent protein fusions could be incorporated into the β‐sheet plates and microspheres formed by the CATCH(6K+/6D−) pair, demonstrating the potential to endow functionality.

     
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al ( , Angewandte Chemie International Edition)
    Abstract

    Self‐assembly of proteinaceous biomolecules into functional materials with ordered structures that span length scales is common in nature yet remains a challenge with designer peptides under ambient conditions. This report demonstrates how charged side‐chain chemistry affects the hierarchical co‐assembly of a family of charge‐complementary β‐sheet‐forming peptide pairs known as CATCH(X+/Y−) at physiologic pH and ionic strength in water. In a concentration‐dependent manner, the CATCH(6K+) (Ac‐KQKFKFKFKQK‐Am) and CATCH(6D−) (Ac‐DQDFDFDFDQD‐Am) pair formed either β‐sheet‐rich microspheres or β‐sheet‐rich gels with a micron‐scale plate‐like morphology, which were not observed with other CATCH(X+/Y−) pairs. This hierarchical order was disrupted by replacing D with E, which increased fibril twisting. Replacing K with R, or mutating the N‐ and C‐terminal amino acids in CATCH(6K+) and CATCH(6D−) to Qs, increased observed co‐assembly kinetics, which also disrupted hierarchical order. Due to the ambient assembly conditions, active CATCH(6K+)‐green fluorescent protein fusions could be incorporated into the β‐sheet plates and microspheres formed by the CATCH(6K+/6D−) pair, demonstrating the potential to endow functionality.

     
    more » « less
  4. ; ; ; ; ; ; ; ( , Communications Chemistry)
    Abstract

    Peptide co-assembly is attractive for creating biomaterials with new forms and functions. Emergence of these properties depends on the peptide content of the final assembled structure, which is difficult to predict in multicomponent systems. Here using experiments and simulations we show that charge governs content by affecting propensity for self- and co-association in binary CATCH(+/−) peptide systems. Equimolar mixtures of CATCH(2+/2−), CATCH(4+/4−), and CATCH(6+/6−) formed two-component β-sheets. Solid-state NMR suggested the cationic peptide predominated in the final assemblies. The cationic-to-anionic peptide ratio decreased with increasing charge. CATCH(2+) formed β-sheets when alone, whereas the other peptides remained unassembled. Fibrillization rate increased with peptide charge. The zwitterionic CATCH parent peptide, “Q11”, assembled slowly and only at decreased simulation temperature. These results demonstrate that increasing charge draws complementary peptides together faster, favoring co-assembly, while like-charged molecules repel. We foresee these insights enabling development of co-assembled peptide biomaterials with defined content and predictable properties.

     
    more » « less
  5. ; ; ; ; ; ( , Journal of Peptide Science)

    Amphipathic peptides with amino acids arranged in alternating patterns of hydrophobic and hydrophilic residues efficiently self‐assemble intoβ‐sheet bilayer nanoribbons. Hydrophobic side chain functionality is effectively buried in the interior of the putative bilayer of these nanoribbons. This study investigates consequences on self‐assembly of increasing the surface area of aromatic side chain groups that reside in the hydrophobic core of nanoribbons derived from Ac‐(XKXE)2‐NH2peptides (X = hydrophobic residue). A series of Ac‐(XKXE)2‐NH2peptides incorporating aromatic amino acids of increasing molecular volume and steric profile (X = phenylalanine [Phe], homophenylalanine [Hph], tryptophan [Trp], 1‐naphthylalanine [1‐Nal], 2‐naphthylalanine [2‐Nal], or biphenylalanine [Bip]) were assessed to determine substitution effects on self‐assembly propensity and on morphology of the resulting nanoribbon structures. Additional studies were conducted to determine the effects of incorporating amino acids of differing steric profile in the hydrophobic core (Ac‐X1KFEFKFE‐NH2and Ac‐(X1,5KFE)‐NH2peptides, X = Trp or Bip). Spectroscopic analysis by circular dichroism (CD) and Fourier transform infrared (FT‐IR) spectroscopy indicatedβ‐sheet formation for all variants. Self‐assembly rate increased with peptide hydrophobicity; increased molecular volume of the hydrophobic side chain groups did not appear to induce kinetic penalties on self‐assembly rates. Transmission electron microscopy (TEM) imaging indicated variation in fibril morphology as a function of amino acid in the X positions. This study confirms that hydrophobicity of amphipathic Ac‐(XKXE)2‐NH2peptides correlates to self‐assembly propensity and that the hydrophobic core of the resulting nanoribbon bilayers has a significant capacity to accommodate sterically demanding functional groups. These findings provide insight that may be used to guide the exploitation of self‐assembled amphipathic peptides as functional biomaterials.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email