An official website of the United States government
Icephobic surfaces have daily critical impact on human lives in cold climates, with uses ranging from aviation systems and infrastructure to energy systems. However, creation of these surfaces for low-temperature applications remains difficult. Non-wetting, liquid-infused and hydrated surfaces have inspired routes for development of icephobic surfaces. However, high ice adhesion strength (∼20–100 kPa) and subsequent ice accretion, low long-term mechanical and environmental durability and high production cost have restricted their applications. Here, we lay the fundamentals of a new physical concept called stress-localization to develop icephobic surfaces with ice adhesion in the order of 1 kPa and exceptional mechanical, chemical and environmental durability.
more »
« less
Stress-localized durable anti-biofouling surfaces
Growing demands for bio-friendly antifouling surfaces have stimulated the development of new and ever-improving material paradigms. Despite notable progress in bio-friendly coatings, the biofouling problem remains a critical challenge. In addition to biofouling characteristics, mechanically stressed surfaces such as ship hulls, piping systems, and heat exchangers require long-term durability in marine environments. Here, we introduce a new generation of anti-biofouling coatings with superior characteristics and high mechanical, chemical and environmental durability. In these surfaces, we have implemented the new physics of stress localization to minimize the adhesion of bio-species on the coatings. This polymeric material contains dispersed organogels in a high shear modulus matrix. Interfacial cavitation induced at the interface of bio-species and organogel particles leads to stress localization and detachment of bio-species from these surfaces with minimal shear stress. In a comprehensive study, the performance of these surfaces is assessed for both soft and hard biofouling including Ulva , bacteria, diatoms, barnacles and mussels, and is compared with that of state-of-the-art surfaces. These surfaces show Ulva accumulation of less than 1%, minimal bacterial biofilm growth, diatom attachment of 2%, barnacle adhesion of 0.02 MPa and mussel adhesion of 7.5 N. These surfaces promise a new physics-based route to address the biofouling problem and avoid adverse effects of biofouling on the environment and relevant technologies.
more »
« less
- Award ID(s):
- 1804204
- PAR ID:
- 10142375
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 15
- Issue:
- 29
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 6014 to 6026
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The ubiquitous nature of microorganisms, especially of biofilm-forming bacteria, makes biofouling a prevalent challenge in many settings, including medical and industrial environments immersed in liquid and subjected to shear forces. Recent studies have shown that zwitterionic groups are effective in suppressing bacteria and protein adhesion as well as biofilm growth. However, the effect of zwitterionic groups on the removal of surface-bound bacteria has not been extensively studied. Here we present a microfluidic approach to evaluate the effectiveness in facilitating bacteria detachment by shear of an antifouling surface treatment using (3-(dimethyl;(3-trimethoxysilyl)propyl)ammonia propane-1-sulfonate), a sulfobetaine silane (SBS). Control studies show that SBS-functionalized surfaces greatly increase protein (bovine serum albumin) removal upon rinsing. On the same surfaces, enhanced bacteria ( Pseudomonas aeruginosa ) removal is observed under shear. To quantify this enhancement a microfluidic shear device is employed to investigate how SBS-functionalized surfaces promote bacteria detachment under shear. By using a microfluidic channel with five shear zones, we compare the removal of bacteria from zwitterionic and glass surfaces under different shear rates. At times of 15 min, 30 min, and 60 min, bacteria adhesion on SBS-functionalized surfaces is reduced relative to the control surface (glass) under quiescent conditions. However, surface-associated bacteria on the SBS-functionalized glass and control show similar percentages of live cells, suggesting minimal intrinsic biocidal effect from the SBS-functionalized surface. Notably, when exposed to shear rates ranging from 10 4 to 10 5 s −1 , significantly fewer bacteria remain on the SBS-functionalized surfaces. These results demonstrate the potential of zwitterionic sulfobetaine as effective antifouling coatings that facilitate the removal of bacteria under shear.more » « less
-
Bacterial adhesion to biotic and abiotic surfaces under fluid shear stress plays a major role in the pathogenesis of infections linked to medical implants and tissues. This study employed an automated BioFlux 200 microfluidic system and video microscopy to conduct real-time adhesion assays, examining the influence of shear stress on adhesion kinetics and spatial distribution of Staphylococcus aureus on glass surfaces. The adhesion rate exhibited a non-linear relationship with shear stress, with notable variations at intermediate levels. Empirical adhesion events were simulated with COMSOL Multiphysics® and Python. Overall, COMSOL accurately predicted the experimental trend of higher rates of bacterial adhesion with decreasing shear stress but poorly characterized the plateauing phenomena observed over time. Python provided a robust mathematical representation of the non-linear relationship between cell concentration, shear stress, and time but its polynomial regression approach was not grounded on theoretical physical concepts. These insights, combined with advancements in AI and machine learning, underscore the potential for synergistic computational techniques to enhance our understanding of bacterial adhesion to surfaces, offering a promising avenue for developing novel therapeutic strategies.more » « less
-
null (Ed.)Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings’ adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.more » « less
-
Bacteria can proliferate orthopedic implants, resulting in infection rates as high as 5%. A consistent problem across implantology is the development of surfaces which successfully promote the adhesion and propagation of healthy fibroblast and osteoblast cells while deterring formation of bacterial biofilms. Selecting surface configurations which favor cell adhesion will lead to decreased infection rates. Progress in identifying appropriate surface configurations is hindered by the lack of quantitative adhesion techniques capable of comparing adhesion of cells and biofilms directly. Recent advancements in adhesion techniques have allowed for quantitatively measured adhesion strengths of both bacterial biofilms and cell monolayers using the laser spallation technique. The quantified stress-based adhesion values allow surface and environmental factors that modulate both bacterial and cell adhesion to implant surfaces to be evaluated. During implantation, blood propagates wound sites completely coating implant surfaces. Quantitatively determining the impact of preconditioning layers that accumulate on the implant surface on cell adhesion is vital to predict implant behavior. Previous work has demonstrated that these preconditioning layers either negatively or neutrally impact bacterial adhesion to titanium implant surfaces. This study focuses on the impact that blood plasma and fibronectin coatings have on the adhesion of osteoblastic (MG 63) cells and fibroblasts to the same titanium surfaces. Adhesion results indicate that preconditioning layers and increased surface roughness positively impact cell adhesion. Incorporating the increased adhesion values for cell adhesion into the Adhesion Index demonstrates that increased surface roughness, coupled with natural wound healing preconditioning of surfaces, yields positive biocompatibility.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/C9SM00790C
