An official website of the United States government
Fast mechanical disconnect switches are an integral part of hybrid circuit breakers, which are proposed as protection devices to clear faults in medium voltage distribution systems. Compared to their conventional counterparts, hybrid circuit breakers can have the ability to limit the fault current, which could allow more interconnections between substations with advantages with respect to grid reliability and resiliency. Furthermore, they enable the integration of distributed generation such as small solar power installations without expensive changes to the grid infrastructure. The proposed design of an ultrafast mechanical disconnect switch operates in vacuum, carries continuous current similar to conventional vacuum interrupters, opens at current zero, features minimum moving mass, and has an open contact separation of less than a millimeter. The limited separation distance requires an optimized contact geometry to keep the electric field within safe limits, minimize the moving mass, and reduce contact resistance. This paper proposes different contact geometries and uses finite element analysis to compare the contact geometries with respect to maximum electric field, mass, and contact resistance. Reductions of mass by 50% and reduction of contact resistance of 10% have been achieved.
more »
« less
A Survey on Mechanical Switches for Hybrid Circuit Breakers
Hybrid circuit breakers are a class of protection devices to facilitate fault current limitation and fast interruption in AC and DC power systems. They are one of the key enabling technologies of multi-terminal DC transmission and distribution systems. As the power rating of DC power systems increases, mechanical switches in the normal conduction path are chosen to provide low on-state loss in a hybrid circuit breaker topology. These mechanical switches require fast actuation to achieve sub- millisecond switching capability, for which only a few actuation mechanisms have been reported to be suitable. Besides electromagnetic repulsion methods like the Thomson coil, piezoelectric actuators also appear to be a good candidate. This paper provides a survey on potential mechanical switches for hybrid circuit breakers considering different actuation mechanisms. Performances of mechanical switches reported in the literature have been summarized and compared, such as response time, displacement, and required actuation energy.
more »
« less
- Award ID(s):
- 1700887
- PAR ID:
- 10142472
- Date Published:
- Journal Name:
- 2019 IEEE Power & Energy Society General Meeting (PESGM)
- Page Range / eLocation ID:
- 1 to 5
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Fast mechanical disconnect switches (FMS) are an integral part of hybrid circuit breakers, which are proposed as protection devices to clear faults in medium voltage distribution systems. The proposed FMS is a vacuum switch that is operated by an amplified piezoelectric actuator. Such actuators enable unprecedented speed and contact separation in less than one millisecond. The limitations that come with such designs are the low contact separation of typically less than one millimeter in open position and low contact force in the order of 100 N in closed position. This requires a new design of the contacts to operate under such constraints. The geometry of the contacts must be carefully designed to minimize electrical resistance when closed and minimize electric field enhancement when open. The paper presents finite element analysis and experimental results with the aim of identifying the most suitable contact geometry for FMS. The experiments show that optimized contact geometries have up to 40% less resistance than the initial spherical geometry.more » « less
-
This article identifies and validates the use of ultrafast silicon carbide (SiC) junction field effect transistor (JFET)-based self-powered solid-state circuit breakers (SSCBs) as the enabling protective device for a 340 Vdc residential dc community microgrid. These SSCBs will be incorporated into a radial distribution system in order to enhance fault discrimination through autonomous operation. Because of the nature and characteristics of short-circuit fault inception in dc microgrids, the time-current trip characteristics of protective devices must be several orders of magnitude faster than conventional circuit breakers. The proposed SSCBs detect short-circuit faults by sensing the sudden voltage rise between its two power terminals and draw power from the fault condition itself to turn off SiC JFETs and then, coordinate with no-load contacts that can isolate the fault. Depending upon the location of the SSCBs in the microgrid, either unidirectional or bidirectional implementations are incorporated. Cascaded SSCBs are tuned using a simple resistor change to enable fault discrimination between upstream high-current feeds and downstream lower current branches. Operation of one of the SSCBs and three in cascaded arrangements are validated both in simulation and with a hardware test platform. Thermal impact on the SSCB is discussed as well. The target application is a residential dc microgrid that will be installed as part of a revitalization effort of an inner city Milwaukee neighborhood.more » « less
-
This study presents a modular, electronics‐free, and fully onboard control and actuation approach for shape memory alloy (SMA)‐based soft robots to achieve locomotion tasks. This approach exploits the nonlinear mechanics of compliant curved beams and carefully designed mechanical control circuits to create and synchronize rhythmic deformation cycles, mimicking the central pattern generators prevalent in animal locomotions. More specifically, the study elucidates a new strategy to amplify the actuation performance of the shape memory coil actuator by coupling it to a carefully designed, monostable curve beam with a snap‐through buckling behavior. Such SMA‐curved beam assembly is integrated with an entirely mechanical circuit featuring a slider mechanism. This circuit can automatically cut off and supply current to the SMA according to its deformation status, generating a self‐sustained rhythmic deformation cycle using a simple DC power supply. Finally, this study presents a new strategy to coordinate (synchronize) two rhythmic deformation cycles from two robotic modules to achieve efficient crawling locomotion but still use a single DC power. This work represents a significant step toward fully autonomous, electronics‐free SMA‐based locomotion robots with fully onboard actuation and control.more » « less
-
Abstract Miniature lenses with a tunable focus are essential components for many modern applications involving compact optical systems. While several tunable lenses have been reported with various tuning mechanisms, they often face challenges with respect to power consumption, tuning speed, fabrication cost, or production scalability. In this work, we have adapted the mechanism of an Alvarez lens – a varifocal composite lens in which lateral shifts of two optical elements with cubic phase surfaces give rise to a change in the optical power – to construct a miniature, microelectromechanical system (MEMS)-actuated metasurface Alvarez lens. Implementation based on an electrostatic MEMS generates fast and controllable actuation with low power consumption. The utilization of metasurfaces – ultrathin and subwavelength-patterned diffractive optics – as optical elements greatly reduces the device volume compared to systems using conventional freeform lenses. The entire MEMS Alvarez metalens is fully compatible with modern semiconductor fabrication technologies, granting it the potential to be mass-produced at a low unit cost. In the reported prototype operating at 1550 nm wavelength, a total uniaxial displacement of 6.3 µm was achieved in the Alvarez metalens with a direct-current (DC) voltage application up to 20 V, which modulated the focal position within a total tuning range of 68 µm, producing more than an order of magnitude change in the focal length and a 1460-diopter change in the optical power. The MEMS Alvarez metalens has a robust design that can potentially generate a much larger tuning range without substantially increasing the device volume or energy consumption, making it desirable for a wide range of imaging and display applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/PESGM40551.2019.8973674
