More Like this

1. Left Ventricular Geometry, Tissue Composition, and Residual Stress in High Fat Diet Dahl-Salt Sensitive Rats.

   https://doi.org/https://doi.org/10.1007/s11340-020-00664-8  

   Grobbel, M. R.; Lee, L. C.; Watts, S. W.; Fink, G. D.; Roccabianca, S. (January 2021, Experimental mechanics)

   null (Ed.)

   Background Hypertension drives myocardial remodeling, leading to changes in structure, composition and mechanical behavior, including residual stress, which are linked to heart disease progression in a gender-specific manner. Emerging therapies are also targeting constituent-specific pathological features. All previous studies, however, have characterized remodeling in the intact tissue, rather than isolated tissue constituents, and did not include sex as a biological variable. Objective In this study we first identified the contribution of collagen fiber network and myocytes to the myocardial residual stress/strain in Dahl-Salt sensitive rats fed with high fat diet. Then, we quantified the effect of hypertension on the remodeling of the left ventricle (LV), as well as the existence of sex-specific remodeling features. Methods We performed mechanical tests (opening angle, ring-test) and histological analysis on isolated constituents and intact tissue of the LV. Based on the measurements from the tests, we performed a stress analysis to evaluate the residual stress distribution. Statistical analysis was performed to identify the effects of constituent isolation, elevated blood pressure, and sex of the animal on the experimental measurements and modeling results. Results Hypertension leads to reduced residual stress/strain in the intact tissue, isolated collagen fibers, and isolated myocytes in male and female rats. Collagen remains the largest contributor to myocardial residual stress in both normotensive and hypertensive animals. We identified sex-differences in both hypertensive and normotensive animals. Conclusions We observed both constituent- and sex-specific remodeling features in the LV of an animal model of hypertension. 

   more » « less
2. Modeling thermal and mechanical cancellation of residual stress from hybrid additive manufacturing by laser peening

   https://doi.org/10.1016/j.npe.2019.07.001  

   Madireddy, Guru; Li, Chao; Liu, Jingfu; Sealy, Michael_P (July 2019, Nanotechnology and Precision Engineering)

   Additive manufacturing (AM) of metals often results in parts with unfavorable mechanical properties. Laser peening (LP) is a high strain rate mechanical surface treatment that hammers a workpiece and induces favorable mechanical properties. Peening strain hardens a surface and imparts compressive residual stresses improving the mechanical properties of a material. This work investigates the role of LP on layer-by-layer processing of 3D printed metals using finite element analysis. The objective is to understand temporal and spatial residual stress development after thermal and mechanical cancellation caused by cyclically coupling printing and peening. Results indicate layer peening frequency is a critical process parameter affecting residual stress redistribution and highly interdependent on the heat generated by the printing process. Optimum hybrid process conditions were found to exists that favorably enhance mechanical properties. With this study, hybrid-AM has ushered in the next evolutionary step in AM and has the potential to profoundly change the way high value metal goods are manufactured. 

   more » « less
3. Designing a New Dynamic Mechanical Analysis (DMA) System for Testing Viscoelastic Materials at High Frequencies

   https://doi.org/10.1155/2019/7026267  

   Esmaeeli, Roja; Aliniagerdroudbari, Haniph; Hashemi, Seyed Reza; JBR, Chiran; Farhad, Siamak (March 2019, Modelling and Simulation in Engineering)

   The aim of this study is to design a new dynamic mechanical analysis (DMA) measurement system that can operate for shear tests at frequencies as high as 10 kHz with strain amplitudes sufficient for viscoelastic materials operating in high-frequency deformation applications, such as tire rubbers. The available DMA systems in market cannot effectively operate for accurate and direct measurement of viscoelastic material properties for applications dealing with high-frequency deformation of materials. Due to this, the available DMA systems are used for indirect measurements at low frequencies and low temperatures, followed by using time-temperature superposition principle to predict the properties at high frequencies. The goal of this study is to make the range of the test broad enough to eliminate the use of the time-temperature superposition principle in the determination of properties of viscoelastic materials. Direct measurement of viscoelastic material properties and increasing the accuracy of results are the main motivations to design a new DMA system. For this purpose, the state-of-the-art technologies to achieve high frequencies and strain amplitudes as well as instrumentation and control of the system are studied. The design process is presented in this paper. 

   more » « less
4. Non-destructive depth-resolved characterization of residual strain fields in high electron mobility transistors using differential aperture x-ray microscopy

   https://doi.org/10.1063/5.0109606  

   Pagan, Darren C.; Rasel, Md A. J.; Lim, Rachel E.; Sheyfer, Dina; Liu, Wenjun; Haque, Aman (October 2022, Journal of Applied Physics)

   Localized residual stress and elastic strain concentrations in microelectronic devices often affect the electronic performance, resistance to thermomechanical damage, and, likely, radiation tolerance. A primary challenge for the characterization of these concentrations is that they exist over sub-μm length-scales, precluding their characterization by more traditional residual stress measurement techniques. Here, we demonstrate the use of synchrotron x-ray-based differential aperture x-ray microscopy (DAXM) as a viable, non-destructive means to characterize these stress and strain concentrations in a depth-resolved manner. DAXM is used to map two-dimensional strain fields between the source and the drain in a gallium nitride (GaN) layer within high electron mobility transistors (HEMTs) with sub-μm spatial resolution. Strain fields at various positions in both pristine and irradiated HEMT specimens are presented in addition to a preliminary stress analysis to estimate the distribution of various stress components within the GaN layer. γ-irradiation is found to significantly reduce the lattice plane spacing in the GaN along the sample normal direction, which is attributed to radiation damage in transistor components bonded to the GaN during irradiation. 

   more » « less
5. Heat Treatments for Minimization of Residual Stresses and Maximization of Tensile Strengths of Scalmalloy® Processed via Directed Energy Deposition

   https://doi.org/10.3390/ma17061333  

   Boillat-Newport, Rachel; Isanaka, Sriram Praneeth; Kelley, Jonathan; Liou, Frank (March 2024, Materials)

   Scalmalloy® is an Al-Mg-Sc-Zr-based alloy specifically developed for additive manufacturing (AM). This alloy is designed for use with a direct aging treatment, as recommended by the manufacturer, rather than with a multistep treatment, as often seen in conventional manufacturing. Most work with Scalmalloy® is conducted using powder bed rather than powder-fed processes. This investigation seeks to fill this knowledge gap and expand beyond single-step aging to promote an overall balanced AM-fabricated component. For this study, directed energy deposition (DED)-fabricated Scalmalloy® components were subjected to low-temperature treatments to minimize residual stresses inherent in the material due to the layer-by-layer build process. X-ray diffraction (XRD) indicated the possibility of stress minimization while reducing the detriment to mechanical strength through lower temperature treatments. Microstructural analyses consisting of energy dispersion spectroscopy (EDS) and electron backscatter diffraction (EBSD) revealed the presence of grain growth detrimentally affecting the strength and elongation made possible by very small grains inherent to AM and rapid solidification. Tensile testing determined that treatment at 175 °C for 1 h provides the best relief from the existing residual stresses; however, this is accompanied by a diminishment in the yield and tensile strength of 19 and 9.5%, respectively. It is noted that treatment at 175 °C for 2 h did not provide as great of a decrease in residual stresses, theorized to be the result of grain growth and other strengthening mechanisms further stressing the structure; however, the residual stresses are still significantly diminished compared with the as-built condition. Furthermore, a minimal reduction of the tensile strengths indicates the possibility of finding a balance between property diminishment and stress state through the work proposed here. 

   more » « less