Hybrid graphene and quantum dots (QDs) photodetectors merge the excellent conductivity and ambipolar electric field sensitivity of graphene, with the unique properties of QDs. The photoresponsivity of these devices depends strongly on the charge transfer at the graphene/QDs interface. Here 1‐pyrene butyric acid (PBA)‐coated PbS QDs with single layer graphene (SLG) are used to investigate the effect of pyrene as a π–π mediator to enhance charge transfer at the SLG/QDs junction under illumination. The surface chemistry at the QD–QD and SLG/QD interface is studied with the conventional tetrabutylammonium iodide (TBAI) QD linker. The hybrid SLG/QD photodetectors with PBA as a SLG‐QD linker demonstrate a photoresponse up to 30% higher than that recorded for devices where only TBAI is used, due to the strong electron coupling between SLG and QDs. Transconductance measurements show that PBA provokes electron depletion in SLG ascribed to the tendency to delocalize the QDs holes, favoring their transfer to SLG. This surface ligand is found to improve the interaction between the QDs light absorbers and the SLG charge collector, leading to an increased photodetection response. This demonstrates that ligand engineering can enhance charge dynamics and boost the performance of the hybrid device.
Hybrid graphene (Gr)–quantum dot (QD) photodetectors have shown ultrahigh photoresponsivity combining the strong light absorption of QDs with the high mobility of Gr. QDs absorb light and generate photocarriers that are efficiently transported by Gr. Typically, hybrid PbS–QD/graphene photodetectors operate by transferring photogenerated holes from the QDs to Gr while photoelectrons stay in the QDs inducing a photogating mechanism that achieves a responsivity of 6 × 107A W−1. However, despite such high gain, these systems have poor charge collection with quantum efficiency below 25%. Herein, a ZnO intermediate layer (PbS‐QD/ZnO/Gr) is introduced to improve charge collection by forming an effective p‐n PbS‐ZnO junction driving the electrons to the ZnO layer and then to Gr. This improves the photoresponsivity of the devices by nearly an order of magnitude with respect to devices without ZnO. Charge transfer to Gr is demonstrated by monitoring the change in Fermi level under illumination for conventional PbS‐QD/Gr and for ZnO intermediate PbS‐QD/ZnO/Gr devices. These results improve the capabilities of hybrid QD/Gr configurations for optoelectronic devices.
more » « less- Award ID(s):
- 1710472
- PAR ID:
- 10149464
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Electronic Materials
- Volume:
- 6
- Issue:
- 6
- ISSN:
- 2199-160X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Photodetectors based on colloidal quantum dots (QD)/graphene nanohybrids are quantum sensors due to strong quantum confinement in both QD and graphene. The optoelectronic properties of QD/graphene nanohybrids are affected by the quantum physics that predicts a high photoconductive gain and hence photoresponsivity (
R *) depending on the pixel length (L ) asR *∝L −2. Experimental confirmation of the effect of the pixel geometric parameters on the optoelectronic properties of the QD/graphene photodetector is therefore important to elucidate the underlying quantum physics. Motivated by this, an array of PbS QDs/graphene nanohybrid photodetectors are designed with variable QD/graphene pixel lengthL and width (W ) in the range of 10–150 µm for a study ofR* , noise, and specific detectivity (D *) in a broad spectrum of 400–1500 nm. Intriguingly,R* exhibits a monotonic decreasing trend of 1/L 2while being independent ofW , confirming experimentally the theoretical prediction. Interestingly, this geometric effect on the photoresponsivity seems to be partially compensated by that in noise, leading toD *independent ofL andW at wavelengths in the ultraviolet‐visible‐near infrared range. This result sheds light on the quantum physics underlying the optoelectronic process in QD/graphene nanohybrids, which is important to the design of high‐quality QD/graphene photodetectors and imaging systems. -
Quantum dots (QDs) offer several advantages in optoelectronics such as easy solution processing, strong light absorption and size tunable direct bandgap. However, their major limitation is their poor film mobility and short diffusion length (<250 nm). This has restricted the thickness of QD film to ∼200–300 nm due to the restriction that the diffusion length imposes on film thickness in order to keep efficient charge collection. Such thin films result in a significant decrease in quantum efficiency for λ > 700 nm in QDs photodetector and photovoltaic devices, causing a reduced photoresponsivity and a poor absorption towards the near-infrared part of the sunlight spectrum. Herein, we demonstrate 1 μm thick QDs photodetectors with intercalated graphene charge collectors that avoid the significant drop of quantum efficiency towards λ > 700 nm observed in most QD optoelectronic devices. The 1 μm thick intercalated QD films ensure strong light absorption while keeping efficient charge extraction with a quantum efficiency of 90%–70% from λ = 600 nm to 950 nm using intercalated graphene layers as charge collectors with interspacing distance of 100 nm. We demonstrate that the effect of graphene on light absorption is minimal. We achieve a time-modulation response of <1 s. We demonstrate that this technology can be implemented on flexible PET substrates, showing 70% of the original performance after 1000 times bending test. This system provides a novel approach towards high-performance photodetection and high conversion photovoltaic efficiency with quantum dots and on flexible substrates.more » « less
-
Abstract Semiconductor quantum dots/graphene heterostructure nanohybrids combine the advantages of the enhanced light–matter interaction and spectral tunability of quantum dots (QDs) and high charge mobility in graphene as a charge transport pathway, providing a unique platform for exploration of photodetectors with high performance. In particular, the QDs/graphene nanohybrids allow resolution to the critical issue of charge transport in QDs-only photodetectors stemming from the low charge mobility associated with both QD surface defect states and inter-QD junctions. Furthermore, the achieved capability in industrial-scale fabrication of graphene and colloidal QDs has motivated efforts in research of QDs/graphene nanohybrids focal plane arrays that are expected to be not only high performance and low cost, but also light-weight, flexible and wearable. This paper aims to highlight recent progress made in the research and development of QDs/graphene nanohybrid photodetectors and discuss the challenges remained towards their commercial applications.more » « less
-
Fulop, Gabor F. ; Kimata, Masafumi ; Zheng, Lucy ; Andresen, Bjørn F. ; Miller, John Lester (Ed.)Colloidal semiconductor quantum dots/graphene van der Waals (vdW) heterojunctions take advantages of the enhanced light-matter interaction and spectral tenability of quantum dots (QDs) and superior charge mobility in graphene, providing a promising alternative for uncooled infrared photodetectors with a gain or external quantum efficiency up to 1010. In these QD/graphene vdW heterostructures, the QD/graphene interface plays a critical role in controlling the optoelectronic process including exciton dissociation, charge injection and transport. Specifically, charge traps at the vdW interface can increase the noise, reduce the responsivity and response speed. This paper highlight our recent progress in engineering the vdW heterojunction interface towards more efficient charge transfer for higher photoresponsivity, D* and response speed. These results illustrate that the importance in vdW heterojunction interface engineering in QD/graphene photodetectors which may provide a promising pathway for low-cost, printable and flexible infrared detectors and imaging systems.more » « less
