Optically controlled RF switches with a novel non-contact device architecture that achieves high performance in the millimeterwave-to-terahertz (mmW-THz) region are proposed and investigated through simulation. The significant change in conductivity in semiconductors caused by photogenerated carriers is used to develop RF switches having very high performance. By including a thin layer of insulator between the active semiconductor material and the metal contacts, the carrier concentration can be enhanced over that of conventional devices. For a prototype demonstration, G-band coplanar waveguide-based optical switches (using Si and Ge as active materials) with different contact geometries have been modeled and simulated. The proposed switches outperform both conventional solid-state switches and phase-change material-based switches in the switch figure-of-merit, and are promising for developing a novel class of tunable and reconfigurable mmW-THz circuits for advanced sensing, imaging, and communication.
Non-volatile RF and mm-wave Switches Based on Monolayer hBN
Non-volatile radio-frequency (RF) switches based on hexagonal boron nitride (hBN) are realized for the first time with low insertion loss (≤ 0.2 dB) and high isolation (≥ 15 dB) up to 110 GHz. Crystalline hBN enables the thinnest RF switch device with a single monolayer (~0.33 nm) as the memory layer owing to its robust layered structure. It affords ~20 dBm power handling, 10 dB higher compared to MoS 2 switches due to its wider bandgap (~6 eV). Importantly, operating frequencies cover the RF, 5G, and mm-wave bands, making this a promising low-power switch for diverse communication and connectivity front-end systems. Compared to other switch technologies based on MEMS, memristor, and phase-change memory (PCM), hBN switches offer a promising combination of non-volatility, nanosecond switching, power handling, high figure-of-merit cutoff frequency (43 THz), and heater-less ambient integration. Our pioneering work suggests that atomically-thin nanomaterials can be good device candidates for 5G and beyond.
more »
« less
- Award ID(s):
- 1809017
- NSF-PAR ID:
- 10149529
- Date Published:
- Journal Name:
- IEEE IEDM
- Page Range / eLocation ID:
- 9.5.1 to 9.5.4
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
null (Ed.)Wireless communication has become an integral part of our lives, continuously improving the quality of our everyday activities. A multitude of functionalities are offered by recent generations of mobile phones, resulting in a significant adoption of wireless devices and a growth in data traffic, as reported by Ericsson [1] in Figure 1. To accommodate consumers' continuous demands for high data rates, the number of frequency bands allocated for communication by governments across the world has also steadily increased. Furthermore, new technologies, such as carrier aggregation and multiple-input/multiple-output have been developed. Today's mobile devices are capable of supporting numerous wireless technologies (i.e., Wi-Fi, Bluetooth, GPS, 3G, 4G, and others), each having its own designated frequency bands of operation. Bandpass filters, multiplexers, and switchplexers in RF transceivers are essential for the coexistence of different wireless technologies and play a vital role in efficient spectrum usage. Current mobile devices contain many bandpass filters and switches to select the frequency band of interest, based on the desired mode of operation, as shown in Figure 2. This figure presents a schematic of a generic RF front end for a typical mobile device, where a separate module is allocated for the filters. Each generation of mobile devices demands a larger number of RF filters and switches, and, with the transition toward 5G and its corresponding frequency bands, the larger number of required filters will only add to the challenges associated with cell-phone RF front-end design.more » « less
-
null (Ed.)Wireless communication has become an integral part of our lives, continuously improving the quality of our everyday activities. A multitude of functionalities are offered by recent generations of mobile phones, resulting in a significant adoption of wireless devices and a growth in data traffic, as reported by Ericsson [1] in Figure 1. To accommodate consumers' continuous demands for high data rates, the number of frequency bands allocated for communication by governments across the world has also steadily increased. Furthermore, new technologies, such as carrier aggregation and multiple-input/multiple-output have been developed. Today's mobile devices are capable of supporting numerous wireless technologies (i.e., Wi-Fi, Bluetooth, GPS, 3G, 4G, and others), each having its own designated frequency bands of operation. Bandpass filters, multiplexers, and switchplexers in RF transceivers are essential for the coexistence of different wireless technologies and play a vital role in efficient spectrum usage. Current mobile devices contain many bandpass filters and switches to select the frequency band of interest, based on the desired mode of operation, as shown in Figure 2. This figure presents a schematic of a generic RF front end for a typical mobile device, where a separate module is allocated for the filters. Each generation of mobile devices demands a larger number of RF filters and switches, and, with the transition toward 5G and its corresponding frequency bands, the larger number of required filters will only add to the challenges associated with cell-phone RF front-end design.more » « less
-
Abstract--Spin switch (SS) is a promising spintronic device which exhibits compactness, low power, non-volatility, input-output isolation leveraging giant spin Hall effect, spin transfer torque, and dipolar coupling. In this paper, we propose a novel device-to-architecture co-design for an in-memory computing platform using coterminous SS (IMCS2), which could simultaneously work as non-volatile memory and reconfigurable in-memory logic (AND/NAND, OR/NOR, and XOR/XNOR) without add-on logic circuits to memory chip. The computed logic output could be simply read out like a normal magnetic random access memory bit cell using the shared memory peripheral circuits. Such intrinsic in-memory logic could be used to process data within memory to greatly reduce power-hungry and long distance data communication in the conventional von Neumann computing system. The IMCS2-based in-memory bulk bitwise Boolean vector operation shows ~9x energy saving and ~3x speedup compared with that of DRAM-based in-memory computing platform. We further employ in-memory multiplication to evaluate the performance of the proposed in-memory computing platform for vector-vector multiplication with different vector sizes.more » « less
-
Full-duplex (FD) wireless is an emerging wireless communication paradigm where the transmitter and the receiver operate simultaneously at the same frequency. One major challenge in realizing FD wireless is the interference of the TX signal saturating the receiver, commonly referred to self-interference (SI). Traditionally, self-interference cancellation (SIC) is achieved in the antenna, RF/analog, and digital domains. In the antenna domain, SIC can be achieved using a pair of separate TX and RX antennas, or using a single antenna shared by the TX and RX through a magnetic circulator, which is usually bulky, expensive, and not integrable with CMOS. Recent advances, however, have shown the feasibility of realizing high-performance non-reciprocal circulators in CMOS based on spatio-temporal modulation. In this work, we demonstrate a high power handling FD radio using a USRP SDR which employs SIC (i) at the antenna interface using a watt-level power-handling CMOS integrated, magnetic-free circulator, (ii) in the RF domain using a compact RF canceler, and (iii) in the digital domain. Our prototyped FD radio achieves +95 dB overall SIC at +15dBm TX power level. We analyze the effects of the circulator TX-RX non-linearity on the total achievable SICmore » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/IEDM19573.2019.8993470
