Abstract We investigated the interplay between deformation and pluton emplacement with the goal of providing insights into the role of transpression and arc magmatism in forming and modifying continental arc crust. We present 39 new laser-ablation–split-stream–inductively coupled plasma–mass spectrometry (LASS-ICP-MS) and secondary ion mass spectrometry (SIMS) 206Pb/238U zircon and titanite dates, together with titanite geochemistry and temperatures from the lower and middle crust of the Mesozoic Median Batholith, New Zealand, to (1) constrain the timing of Cretaceous arc magmatism in the Separation Point Suite, (2) document the timing of titanite growth in low- and high-strain deformational fabrics, and (3) link spatial and temporal patterns of lithospheric-scale transpressional shear zone development to the Cretaceous arc flare-up event. Our zircon results reveal that Separation Point Suite plutonism lasted from ca. 129 Ma to ca. 110 Ma in the middle crust of eastern and central Fiordland. Deformation during this time was focused into a 20-km-wide, arc-parallel zone of deformation that includes previously unreported segments of a complex shear zone that we term the Grebe shear zone. Early deformation in the Grebe shear zone involved development of low-strain fabrics with shallowly plunging mineral stretching lineations from ca. 129 to 125 Ma. Titanites in these rocks are euhedral, are generally aligned with weak subsolidus fabrics, and give rock-average temperatures ranging from 675 °C to 700 °C. We interpret them as relict magmatic titanites that grew prior to low-strain fabric development. In contrast, deformation from ca. 125 to 116 Ma involved movement along subvertical, mylonitic shear zones with moderately to steeply plunging mineral stretching lineations. Titanites in these shear zones are anhedral grains/aggregates that are aligned within mylonitic fabrics and have rock-average temperatures ranging from ∼610 °C to 700 °C. These titanites are most consistent with (re)crystallization in response to deformation and/or metamorphic reactions during amphibolite-facies metamorphism. At the orogen scale, spatial and temporal patterns indicate that the Separation Point Suite flare-up commenced during low-strain deformation in the middle crust (ca. 129–125 Ma) and peaked during high-strain, transpressional deformation (ca. 125–116 Ma), during which time the magmatic arc axis widened to 70 km or more. We suggest that transpressional deformation during the arc flare-up event was an important process in linking melt storage regions and controlling the distribution and geometry of plutons at mid-crustal levels.
more »
« less
Competing Influence of Compositional Variability and Metamorphism on Strain Localization in a Lower-Crustal, Transpressional Shear Zone, Fiordland, New Zealand
Over 500 km2 of rock exposure in Fiordland, New Zealand records strain localization processes accompanying the formation of a steep, transpressional shear zone within the root of a Cretaceous continental magmatic arc. Here, we pair field observations with microstructural and petrographic analyses of the George Sound shear zone (GSSZ) to investigate how metamorphism and compositional variability influenced shear zone evolution in the lower continental crust.
The northern portion of the 50 km-long GSSZ deforms a monzodioritic pluton where superposed mineral fabrics record a narrowing of the shear zone width over time. Early stage deformation was accommodated mostly by dynamic recrystallization of pyroxene and plagioclase, forming a steep zone of coarse, gneissic foliations over 10 km wide. Subsequent deformation created a 2 km-thick zone of mylonite containing fine-grained plagioclase, hornblende, biotite, and quartz. The latter three minerals formed during the hydration of older minerals, including igneous pyroxene. The change in mineralogy and grain size also produced thin (< 1 mm), weak layers that localized deformation in shear bands in the highest strain zones. The southern ~35 km of the GSSZ deforms a heterogeneous section of granite, diorite, and metasedimentary rock. In this area, the hydration of igneous assemblages also is pervasive but is not restricted to high-strain zones. Instead, the shear zone branches into four ≤1 km-wide strands that closely follow lithologic contacts. The thinnest branch occurs at the contact of a coarse-grained, dioritic pluton and a fine-grained granitic pluton.
These patterns suggest that the factors that controlled strain localization in the GSSZ vary along its length. In the north, where its host rock is homogeneous, retrograde metamorphism helped localized strain into shear bands at the micro scale, mirroring a narrowing at the km scale. In the south, lithologic contacts created weak zones that appear to have superseded the effects of metamorphism, creating a series of thin, branching high-strain zones. These results suggest that the rheology of lower-crustal shear zones also varies significantly along their length and over time. Both of these factors can be used to generate improved models of continental deformation.
more »
« less
- Award ID(s):
- 1650183
- NSF-PAR ID:
- 10151605
- Date Published:
- Journal Name:
- American Geophysical Union Abstracts with Programs
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Shear localization in the upper mantle, a necessity for plate tectonics, can have a number of causes, including shear heating, the presence of melt, the development of a strong crystal preferred orientation, and the presence of water. The Josephine Peridotite of southwestern Oregon contains shear zones that provide an excellent opportunity to examine the initiation of shear localization. These shear zones are relatively small scale and low strain compared to many shear zones in peridotite massifs, which typically have extreme grain size reduction indicating extensive deformation. We use major, trace, and volatile element analyses of a large suite of harzburgites from the Fresno Bench shear zones to evaluate the mechanisms leading to shear localization. Lithological evidence and geochemical transects across three shear zones show a complex history of melting, melt addition, and melt‐rock interaction. The distribution of aluminum and heavy rare earth elements across the shear zones suggest that melt flow was focused in the centers of the studied shear zones. Water concentrations in orthopyroxene grains of 180–334 ppm H2O indicate a comparatively high degree of hydration for nominally anhydrous minerals. The correlation of water with aluminum and ytterbium in orthopyroxene is consistent with a melt source for this hydration, suggesting that water equilibrated between the melt and peridotite. The presence of melt and hydration of the host rock provide mechanisms for initial weakening that lead to localized deformation.
-
more » « less
Abstract Fluids can play an important role in the localization of deformation in the deep crust, yet the specific mechanisms active during the complex interactions between metasomatism, metamorphism and deformation remain elusive. Precambrian metagabbronorite dykes in southwest Montana contain fractures filled with Hbl±Grt and discrete cm‐scale shear zones with well‐preserved strain gradients. This system offers an ideal opportunity to constrain the chemical and mechanical processes that facilitated strain localization. An early M1assemblage of Grt1+Cpx1+Pl1+Qz developed at conditions of 0.51–0.85
GP a and 500–700°C and is preserved largely as a static replacement of relict igneous phases (Opx, Pgt, Pl) in coronitic textures. An M2assemblage characterized by Grt2+Pl2±Cpx2+Hbl+Scp+Qz developed at 0.86–1.00GP a and 660–730°C coincided with fluid flow and deformation associated with shear zone development. Microstructural observations in marginal protomylonite/mylonite and laminated ultramylonite suggest a shear zone evolution that involved (1) nucleation from pre‐existing fractures that were sites for major fluid infiltration, (2) initial widening coincident with grain‐size reduction by microfracturing, dislocation creep, and synkinematic metamorphic reaction by solution transfer, and (3) a switch in the dominant deformation mechanisms active in the ultramylonite from grain‐size insensitive mechanisms to grain‐size sensitive granular flow accommodated by fluid‐assisted diffusion. Throughout this evolution, the effective bulk compositions of the rock volumes responding to metamorphism changed through a combination of mechanical and metasomatic processes. -
We present a new method of linking microstructures, electron backscatter diffraction (EBSD)–derived crystallographic vorticity axis (CVA) analysis, and titanite petrochronology to directly link fabric development to specific deformation events in shear zone rocks with complex histories. This approach is particularly useful where overprinting is incomplete, such that it is unknown which fabric is being dated by the petrochronometer. Here, we compared single-phase CVA patterns of fabric-forming minerals with those of synkinematic petrochronometers (e.g., titanite) to associate the timing of fabric development with deformational events in the middle crust of the George Sound shear zone, Fiordland, New Zealand. The host rocks to the George Sound shear zone include the Carboniferous Large Pluton, where titanite petrochronology demonstrates an unequivocally Cretaceous age of metamorphic titanite growth within mylonitic foliation. However, the host rocks show two distinct CVA patterns: a transtensional deformation event recorded by quartz and plagioclase, and a pure-shear–dominated transpressional deformation event recorded by biotite and titanite. Therefore, the transpressional CVA pattern of the titanite, coupled with its Cretaceous age, shows that it cannot be used to date the quartz and plagioclase fabric developed in response to an older transtensional deformation event. These results demonstrate the necessity of combining EBSD and CVA analysis with petrochronology to demonstrate that synkinematic accessory phase petrochronometers show the same kinematic deformation geometry (i.e., CVA pattern) as the fabric being dated.more » « less
-
The Southern California Batholith is a ~500-km-wide segment of the Mesozoic California arc that lies between the northern Peninsular Ranges and the southern Sierra Nevada mountains. We use structural data and U-Pb zircon analyses from the eastern San Gabriel mountains to examine how the batholith responded to the onset of the Laramide orogeny during the Late Cretaceous. Zircon analyses show that the middle and lower crust of the batholith was hot and records a magmatic flareup from 90-77 Ma. From 90 to 86 Ma, tonalite of the San Sevaine Lookout intruded a thick package of metasedimentary rock that records a history of reverse displacements, crustal imbrication, and granulite metamorphism prior to tonalite intrusion. During the early stages of the magmatic flare-up, granodiorite dikes were emplaced and soon became tightly folded and disaggregated as younger sheets of comagmatic tonalite intruded. Deformation accompanied the magmatism, forming two parallel shear zones several 100 m thick. These two shear zones, which include the Black Belt Mylonite, are composed of thin (≤10 m) high-strain zones spaced several tens of meters apart. Each discrete high-strain zone contains subparallel layers of mylonite, ultramylonite, cataclasite and pseudotachylyte, all recording oblique sinistral-reverse displacements on gently and moderately dipping surfaces. This architecture, whereby individual high-strain zones are widely spaced and parallel the margins of intruding tonalite sheets, reveals the influence of magma emplacement on shear zone structure. U-Pb zircon geochronology on syn-tectonic dikes indicate that these different styles of deformation all formed within the same 89-85 Ma interval, suggesting that they reflect non-steady flow on deep seismogenic faults. Widespread (garnet) granulite-facies metamorphism and partial melting accompanied intrusion of the tonalites and sinistral- reverse displacements. The ages of undeformed dikes indicate that the deformation was over by 77-75 Ma. Together, these data show that arc magmatism and transpression within the Mesozoic California arc occurred from ~90 until ~75 Ma, implying that flat-slab subduction and the migration of the Laramide orogenic front into the North America interior occurred after ~75 Ma.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
