An official website of the United States government
We have discovered that 5 keV bursts of 5 × 107 positrons with an initial longitudinal spin polarization of (28.8 ± 0.7)%, when implanted into a thin Ni(100) crystal, are emitted with 20% efficiency at thermal energies from its surface with (30.9 ± 0.5)% polarization. We conclude that the positron spin polarization is preserved while interacting with the Ni, despite the 0.61 T average transverse magnetization of the Ni at room temperature. The resulting polarized beam has been focused to a 0.025-mm mean-diameter spot when accelerated to 5 keV and will be uniquely suited for experiments on a neutral spin aligned e+-e − plasma, spin- and angle-resolved positronium emission spectroscopy, and critical for producing a triplet positronium Bose-Einstein condensate.
more »
« less
Multiple Metamaterial Pattern Integration for Polarization Selective Photodetector Applications
ABSTRACT Interest in active metamaterial (MM) devices has recently increased due to their potential for tunable, switchable, and scalable optical responses. More specifically, a dynamic, on-chip MM polarizer has applications ranging from material characterization to sensing without the need for cumbersome external filters. This work demonstrates efforts to optimize MM devices for dynamic polarization filtering by combining elements from split-ring resonators, wire-pairs, and fishnet patterns. The polarization grid has been designed to operate under an applied voltage with simulated on/off ratios of 75% and dynamic polarization selectivity of 70%. Samples have been fabricated using epitaxial GaAs on sapphire with various n-type doping concentrations to approximate electrical tuning.
more »
« less
- Award ID(s):
- 1806311
- PAR ID:
- 10152809
- Date Published:
- Journal Name:
- MRS Advances
- Volume:
- 3
- Issue:
- 33
- ISSN:
- 2059-8521
- Page Range / eLocation ID:
- 1907 to 1912
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Zmuidzinas, Jonas; Gao, Jian-Rong (Ed.)Front-end polarization modulation enables improved polarization measurement stability by modulating the targeted signal above the low-frequency $1/f$ drifts associated with atmospheric and instrumental instabilities and diminishes the impact of instrumental polarization. In this work, we present the design and characterization of a new 60-cm diameter Reflective Half-Wave Plate (RHWP) polarization modulator for the 90 GHz band telescope of the Cosmology Large Angular Scale Surveyor (CLASS) project. The RHWP consists of an array of parallel wires (diameter 50~µm, 175~µm pitch) positioned 0.88~mm from an aluminum mirror. In lab tests, it was confirmed that the wire resonance frequency ($$f_\mathrm{res}$$) profile is consistent with the target, $139$~Hz$$<154$$~Hz in the optically active region (diameter smaller than 150~mm), preventing the wire vibration during operation and reducing the RHWP deformation under the wire tension. The mirror tilt relative to the rotating axis was controlled to be $<15''$, corresponding to an increase in beam width due to beam smearing of < $0.6''$, %a beam smearing amplitude of $<0.6''$, negligible compared to the beam's full-width half-maximum of $36'$. The median and 16/84th percentile of the wire--mirror separation residual was $$0.048^{+0.013}_{-0.014}$$~mm in the optically active region, achieving a modulation efficiency $$\epsilon=96.2_{+0.5}^{-0.4}\%$$ with an estimated bandpass of 34~GHz. The angular velocity of the RHWP was maintained to an accuracy of within 0.005\% at the nominal rotation frequency (2.5~Hz). The RHWP has been successfully integrated into the CLASS 90 GHz telescope and started taking data in June 2024, replacing the previous modulator that has been in operation since June 2018.more » « less
-
Unpolarized light can be an important tool in optical experiments. Producing it, however, can prove to be a challenge. Natural sources of light that are commonly thought of as unpolarized are, in fact, either weakly polarized or not practical sources of light in a laboratory setting. Standard, commercially available light depolarizers produce unpolarized light only after the polarization state of the light across the diameter of the output beam has been averaged. Locally, such beams are highly polarized. In this work, we report a simple, low cost light depolarizer capable of producing light with a total polarization of less than 1% for a 15-mm diameter output beam. Based upon diffuse scattering, the light transmitted through the depolarizer discussed here produces only small polarizations locally, with the total polarization for a 1.25-mm diameter area being <6%. The effects of the depolarizer on the transmitted beam’s intensity are also reported.more » « less
-
Abstract The field of integrated photonics has advanced rapidly due to wafer-scale fabrication, with integrated-photonics platforms and fabrication processes being demonstrated at both infrared and visible wavelengths. However, these demonstrations have primarily focused on fabrication processes on silicon substrates that result in rigid photonic wafers and chips, which limit the potential application spaces. There are many application areas that would benefit from mechanically-flexible integrated-photonics wafers, such as wearable healthcare monitors and pliable displays. Although there have been demonstrations of mechanically-flexible photonics fabrication, they have been limited to fabrication processes on the individual device or chip scale, which limits scalability. In this paper, we propose, develop, and experimentally characterize the first 300-mm wafer-scale platform and fabrication process that results in mechanically-flexible photonic wafers and chips. First, we develop and describe the 300-mm wafer-scale CMOS-compatible flexible platform and fabrication process. Next, we experimentally demonstrate key optical functionality at visible wavelengths, including chip coupling, waveguide routing, and passive devices. Then, we perform a bend-durability study to characterize the mechanical flexibility of the photonic chips, demonstrating bending a single chip 2000 times down to a bend diameter of 0.5 inch with no degradation in the optical performance. Finally, we experimentally characterize polarization-rotation effects induced by bending the flexible photonic chips. This work will enable the field of integrated photonics to advance into new application areas that require flexible photonic chips.more » « less
-
ABSTRACT Polarization is a unique tool to study the dust grains of protoplanetary discs. Polarization around HL Tau was previously imaged using the Atacama Large Millimeter/submillimeter Array (ALMA) at Bands 3 (3.1 mm), 6 (1.3 mm), and 7 (0.87 mm), showing that the polarization orientation changes across wavelength λ. Polarization at Band 7 is predominantly parallel to the disc minor axis but appears azimuthally oriented at Band 3, with the morphology at Band 6 in between the two. We present new ∼0.2 arcsec (29 au) polarization observations at Q-Band (7.0 mm) using the Karl G. Jansky Very Large Array (VLA) and at Bands 4 (2.1 mm), 5 (1.5 mm), and 7 using ALMA, consolidating HL Tau’s position as the protoplanetary disc with the most complete wavelength coverage in dust polarization. The polarization patterns at Bands 4 and 5 follow the previously identified morphological transition with wavelength. From the azimuthal variation, we decompose the polarization into contributions from scattering (s) and thermal emission (t). s decreases slowly with increasing λ, and t increases more rapidly which are expected from optical depth effects of toroidally aligned scattering prolate grains. The weak λ dependence of s is inconsistent with the simplest case of Rayleigh scattering by small grains in the optically thin limit but can be affected by factors such as optical depth, disc substructure, and dust porosity. The sparse polarization detections from the Q-band image are also consistent with toroidally aligned prolate grains.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1557/adv.2018.43
