Bicontinuous interfacially jammed emulsion gels (bijels) formed via solvent transfer induced phase separation (STrIPS) are new soft materials with potential applications in separations, healthcare, or catalysis. To facilitate their applications, means to fabricate STrIPS bijels with nanoparticles of various surface chemistries are needed. Here, we investigate the formation of STrIPS bijels with nanoparticles of different wettabilities, ranging from partially hydrophobic to extremely hydrophilic. To this end, the surface wettability of silica nanoparticles is tailored by functionalization with ligands bearing either hydrophobic or hydrophilic terminal groups. We show that partially hydrophobic particles with acrylate groups can impart short-term stability to STrIPS bijels on their own. However, to enable long-term stability, the use of cationic surfactants is needed. Partially hydrophobic particles require short chain surfactants for morphological stability while glycerol-functionalized hydrophilic particles require double chain cationic surfactants. Variation of the surfactant concentration results in various STrIPS bijel morphologies with controllable domain sizes. Last, we show that functional groups on the nanoparticles facilitate interfacial cross-linking for the purposes of reinforcing STrIPS bijels. Our research lays the foundation for the use of a wide variety of solid particles, irrespective of their surface wettabilities, to fabricate bijels with potential applications in Pickering interfacial catalysis and as cross-flow microreactors.
more »
« less
Bicontinuous Interfacially Jammed Emulsion Gels (bijels) as Media for Enabling Enzymatic Reactive Separation of a Highly Water Insoluble Substrate
Although enzymes are efficient catalysts capable of converting various substrates into desired products with high specificity under mild conditions, their effectiveness as catalysts is substantially reduced when substrates are poorly water-soluble. In this study, to expedite the enzymatic conversion of a hydrophobic substrate, we use a bicontinuous interfacially jammed emulsion gel (bijel) which provides large interfacial area between two immiscible liquids: oil and water. Using lipase-catalyzed hydrolysis of tributyrin as a model reaction in a batch mode, we show that bijels can be used as media to enable enzymatic reaction. The bijel system gives a four-fold increase in the initial reaction rate in comparison to a stirred biphasic medium. Our results demonstrate that bijels are powerful biphasic reaction media to accelerate enzymatic reactions with various hydrophobic reagents. This work also demonstrates that bijels can potentially be used as reaction media to enable continuous reactive separations.
more » « less- Award ID(s):
- 1751479
- NSF-PAR ID:
- 10153384
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Scientific Reports
- Volume:
- 9
- Issue:
- 1
- ISSN:
- 2045-2322
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Porous materials possess numerous useful functions because of their high surface area and ability to modulate the transport of heat, mass, fluids, and electromagnetic waves. Unlike highly ordered structures, disordered porous structures offer the advantages of ease of fabrication and high fault tolerance. Bicontinuous interfacially jammed emulsion gels (bijels) are kinetically trapped disordered biphasic materials that can be converted to porous materials with tunable features. Current methods of bijel fabrication result in domains that are micrometers or larger, and non-uniform in size, limiting their surface area, mechanical strength, and interaction with electromagnetic waves. In this work, scalable synthesis of bijels with uniform and sub-micrometer domains is achieved via a two-step solvent removal process. The resulting bijels are characterized quantitatively to verify the uniformity and sub-micrometer scale of the domains. Moreover, these bijels have structures that resemble the microstructure of the scale of the white beetle Cyphochilus. We find that such bijel films with relatively small thicknesses (<150 μm) exhibit strong solar reflectance as well as high brightness and whiteness in the visible range. Considering their scalability in manufacturing, we believe that VIPS-STRIPS bijels have great potential in large-scale applications including passive cooling, solar cells, and light emitting diodes (LEDs).more » « less
-
more » « less
Abstract Among many biomass‐derived intermediate compounds, 5‐hydroxymethylfurfural (HMF) has been regarded as a platform chemical because it can be used to produce numerous valuable products. However, the difficulty of HMF isolation from reaction media coupled with its poor stability have significantly inhibited its large‐scale production and application. In this work, we report a single‐step process for the direct production of HMF from glucose using green chemical methods. Optimized glucose isomerization and dehydration under microwave irradiation achieved a respectable HMF yield (70 %) using a biphasic solvent mixture (water/THF), high glucose concentration (30 % w/v), catalytic amounts of AlCl3(5 mol%) and HCl (15 mol%). The reaction can be completed within minutes at 165 °C. Overall, our microwave‐assisted strategy enables the direct conversion of commercially available glucose to the highly valuable platform chemical HMF without the use of expensive solvents or catalysts, suggesting an economically attractive approach for upgrading carbohydrates.
-
more » « less
Abstract Rope making is a millennia old technique to collectively assemble numerous weak filaments into flexible and high tensile strength bundles. However, delicate soft matter fibers lack the robustness to be twisted into bundles by means of mechanical rope making tools. Here, weak microfibers with tensile strengths of a few kilopascals are combined into ropes via microfluidic twisting. This is demonstrated for recently introduced fibers made of bicontinuous interfacially jammed emulsion gels (bijels). Bijels show promising applications in use as membranes, microreactors, energy and healthcare materials, but their low tensile strength make reinforcement strategies imperative. Hydrodynamic twisting allows to produce continuous bijel fiber bundles of controllable architecture. Modelling the fluid flow field reveals the bundle geometry dependence on a subtle force balance composed of rotational and translational shear stresses. Moreover, combining multiple bijel fibers of different compositions enables the introduction of polymeric support fibers to raise the tensile strength to tens of megapascals, while simultaneously preserving the liquid like properties of the bijel fibers for transport applications. Hydrodynamic twisting shows potentials to enable the combination of a wide range of materials resulting in composites with features greater than the sum of their parts.
-
Bicontinuous particle-stabilized emulsions (bijels) are networks of interpenetrating oil/water channels with applications in catalysis, tissue engineering, and energy storage. Bijels can be generated by arresting solvent transfer induced phase separation (STrIPS) via interfacial jamming of nanoparticles. However, until now, STrIPS bijels have only been formed with silica nanoparticles of low surface charge densities, limiting their potential applications in catalysis and fluid transport. Here, we show how strongly charged silica nanoparticles can stabilize bijels. To this end, we carry out a systematic study employing dynamic light scattering, zeta potential, acid/base titrations, turbidimetry, surface tension, and confocal microscopy. We find that moderating the adsorption of oppositely charged surfactants on the particles is crucial to facilitate particle dispersibility in the bijel casting mixture and bijel stabilization. Our results potentially introduce a general understanding for bijel fabrication with different inorganic nanoparticle materials of variable charge density.more » « less
