skip to main content


Title: A study of TiO 2 nanocrystal growth and environmental remediation capability of TiO 2 /CNC nanocomposites
Nanocellulose, which can be derived from any cellulosic biomass, has emerged as an appealing nanoscale scaffold to develop inorganic–organic nanocomposites for a wide range of applications. In this study, titanium dioxide (TiO 2 ) nanocrystals were synthesized in the cellulose nanocrystal (CNC) scaffold using a simple approach, i.e. , hydrolysis of a titanium oxysulfate precursor in a CNC suspension at low temperature. The resulting TiO 2 nanoparticles exhibited a narrow size range between 3 and 5 nm, uniformly distributed on and strongly adhered to the CNC surface. The structure of the resulting nanocomposite was evaluated by transmission electron microscopy (TEM) and X-ray diffraction (XRD) methods. The growth mechanism of TiO 2 nanocrystals in the CNC scaffold was also investigated by solution small-angle X-ray scattering (SAXS), where the results suggested the mineralization process could be described by the Lifshitz–Slyozov–Wagner theory for Ostwald ripening. The demonstrated TiO 2 /CNC nanocomposite system exhibited excellent performance in dye degradation and antibacterial activity, suitable for a wide range of environmental remediation applications.  more » « less
Award ID(s):
1808690
NSF-PAR ID:
10154969
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
RSC Advances
Volume:
9
Issue:
69
ISSN:
2046-2069
Page Range / eLocation ID:
40565 to 40576
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2(up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X‐ray diffraction and nitrogen adsorption‐desorption measurements. UV‐Vis diffuse reflectance spectra were recorded and the Kubelka‐Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in theEgvalue. X‐ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2‐based materials with antimicrobial properties that could be used in numerous green technology applications.

     
    more » « less
  2. null (Ed.)
    Cobalt( ii ) ions were adsorbed to the surface of rod-shape anatase TiO 2 nanocrystals and subsequently heated to promote ion diffusion into the nanocrystal. After removal of any remaining surface bound cobalt, a sample consisting of strictly cobalt-doped TiO 2 was obtained and characterized with powder X-ray diffraction, transmission electron microscopy, UV-visible spectroscopy, fluorescence spectroscopy, X-ray photoelectron spectroscopy, SQUID magnetometry, and inductively-coupled plasma atomic emission spectroscopy. The nanocrystal morphology was unchanged in the process and no new crystal phases were detected. The concentration of cobalt in the doped samples linearly correlates with the initial loading of cobalt( ii ) ions on the nanocrystal surface. Thin films of the cobalt doped TiO 2 nanocrystals were prepared on indium-tin oxide coated glass substrate, and the electrical conductivity increased with the concentration of doped cobalt. Magnetic measurements of the cobalt-doped TiO 2 nanocrystals reveal paramagnetic behavior at room temperature, and antiferromagnetic interactions between Co ions at low temperatures. Antiferromagnetism is atypical for cobalt-doped TiO 2 nanocrystals, and is proposed to arise from interstitial doping that may be favored by the diffusional doping mechanism. 
    more » « less
  3. Electrochemical oxidation of water and electrolyte ions is a sustainable method for producing energy carriers and valuable chemicals. Among known materials for catalyzing oxidation reactions, titanium dioxide (TiO 2 ) offers excellent electrochemical stability but is less active than many other metal oxides. Herein, we used density functional theory calculations to predict an increase in catalytic activity by doping anatase TiO 2 with manganese atoms (Mn). We synthesized Mn-doped TiO 2 and then utilized X-ray absorption spectroscopy to study the chemical environment around the Mn site in the TiO 2 crystal structure. Our electrochemical experiments confirmed that TiO 2 , with the optimal amount of Mn, reduces the onset potential by 260 mV in a 2 M KHCO 3 (pH = ∼8) electrolyte and 370 mV in a 0.5 M H 2 SO 4 (pH = ∼0.5) electrolyte. Moreover, in 0.5 M H 2 SO 4 , we observed that the amount of Mn doping greatly impacts the selectivity towards oxygen production versus peroxysulfate formation. In 2 M KHCO 3 , the Mn doping of TiO 2 slightly decreases the selectivity towards oxygen production and increases the hydrogen peroxide formation. The Mn-doped TiO 2 shows good electrochemical stability for over 24 hours in both electrolytes. 
    more » « less
  4. Electrochemical (EC) and photoelectrochemical (PEC) water treatment systems are gaining popularity, necessitating new electrode materials that offer reliable performance across diverse application platforms. For applications specifically targeting dilute chemical pollutants ( i.e. , parts-per-million concentrations or less), beneficial electrode properties include high surface area to overcome kinetic overpotential losses, low electrode areal electrical resistance, and high water permeability with sufficient mechanical strength for use in electroactive membrane-based treatment systems. Here, we used electrospinning to fabricate (photo)electrodes from carbon nanofibers (CNFs) containing titanium dioxide (TiO 2 ) nanoparticles. Optimal CNF/TiO 2 composites were electrochemically and photochemically active with a surface area of ∼50 m 2 g −1 and electrode areal resistance of 2.66 Ω cm 2 , values comparable to commercial carbon-based electrode materials ( e.g. , Kynol Activated Carbon Cloth). Transformation experiments with carbamazepine (CBZ), a recalcitrant organic contaminant, suggest CNF/TiO 2 electrodes function dually as sorbents, first binding CBZ prior to oxidation at positive applied potentials. Complete CBZ transformation was observed in both EC (dark) and PEC (UV light; 280 mW cm −2 ) systems over 90 minutes, with PEC systems exhibiting 1.5-fold higher transformation rates ( k obs ∼ 0.18 min −1 ) at +1.00 V ( vs. Ag/AgCl). Composite electrodes also exhibited stability across repeated use, yielding consistent current densities over five experimental cycles (120 min each) of CBZ transformation (0.25 ± 0.03 mA cm −2 ). Because of their high surface area, electrical conductivity, photoactivity, and electrochemical stability, these electrospun CNF/TiO 2 composites represent promising (photo)electrode alternatives for diverse EC and PEC applications. 
    more » « less
  5. Abstract

    Block copolymers (BCPs) have received significant attention as promising candidates for sequestering nanoparticles and fabrication of aligned nanostructures with optimal optical or electrical properties. We investigate the influence of static and dynamic thermal field on the alignment of polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) BCP morphology with the loading of novel poly(methyl methacrylate‐block‐Polystyrene) (PMMA‐b‐PS)‐grafted‐TiO2nanoparticles (BCP‐g‐TiO2). Observation of characteristics IR peaks for PMMA and PS in BCP‐g‐TiO2nanoparticles and Transmission Electron Microscopy (TEM) results of the outer coating of core nanoparticle, validate the grafting to approach in synthesizing BCP‐g‐TiO2. Here we report that under the sharp dynamic thermal field, at low loading of BCP‐g‐TiO2, there is good dispersion of nanoparticles in unidirectionally aligned BCP matrix in film interior probed by GISAXS, while, at high nanoparticle loading (~10 wt%), there is local frustration in the unidirectional alignment of the BCP matrix due to aggregation of BCP‐g‐TiO2nanoparticles. However, Grazing incidence small angle X‐ray scattering (GISAXS) shows clearly that the BCP films remain largely locally ordered at the domain scale, despite these large perturbations to long‐range ordering even at high loading level, while bringing in new TiO2functionality to the BCP films, such as UVO absorptivity or biofouling prevention, important to potential new applications of such membranes.

     
    more » « less