In the eastern San Gabriel Mountains, located north of Los Angeles, California, the late Cenozoic Cucamonga thrust has uplifted and exposed the lower crustal root of the Mesozoic Southern California Batholith. We use structural data and U-Pb zircon analyses from these exposures to document changes in the style of intra-arc deformation in the batholith as the Laramide Orogeny began during the Late Cretaceous (at or after ~90 Ma).
At the base of the uplifted section, a 4 km-thick package of metasedimentary rock records the intrusion of amphibolite, charnokite and other dikes of probable Jurassic to Early Cretaceous age. The oldest gneissic fabrics (S1, S2) in these rocks record Early Cretaceous partial melting, granulite-facies metamorphism, and top-to-the-S and -SE (present day reference frame) reverse motion on surfaces that dip moderately to the N and NW. These structures define a D1/D2 thrust system that formed on the trench side of the arc and was active during the Early Cretaceous. From 89-77 Ma this thrust system was reactivated by oblique-slip shear zones (D3) that record sinistral-reverse displacements on N- and NW-dipping surfaces. The timing of deformation in these latter shear zones is indicated by the age of 90-85 Ma syn-kinematic intrusions of the Tonalite of San Sevaine Lookout. After emplacement of the tonalite, the lower crustal section was deformed by a series of S-vergent, overturned folds. The emplacement of granodioritic dikes into the axial planes of some of these folds suggests that they formed during the latest stages of D3 transpression and tonalite emplacement. Superimposed on all these structures are a series of ductile-to-brittle thrust faults and folds that appear to be related to formation of the late Cenozoic Cucamonga thrust fault at the southern edge of the San Gabriel mountains.
These data show that the Southern California Batholith in the San Gabriel Mountains records a tectonic transition from Early Cretaceous reverse faulting and crustal imbrication on the trench side of the arc to Late Cretaceous transpression and oblique sinistral-reverse deformation during a magmatic flare-up from 89-77 Ma. Another major episode of shortening and crustal imbrication occurred during the late Cenozoic when the Cucamonga thrust uplifted the San Gabriel block.
more »
« less
Timing, Kinematics, and Displacement of the Taltal Fault System, Northern Chile: Implications for the Cretaceous Tectonic Evolution of the Andean Margin
An extensive system of NW striking faults constitutes a major tectonic feature of the Coastal Cordillera in northern Chile, but fundamental questions remain about timing and kinematics of these structures. We present new geologic mapping and geochronology that provide insight into the structural evolution and tectonic significance of the Taltal fault system (TFS). The TFS displaces the Early Cretaceous arc‐parallel Atacama fault system (AFS) with ~10.6 km cumulative offset across a ~15 km wide zone. Brittle fault data demonstrate that the TFS is vertical to steeply NE dipping with an average sinistral slip vector plunging 11° from the NW, compatible with E‐W shortening. Two late Early Cretaceous dikes cut the AFS but are cut by TFS faults, and synkinematic calcite on a TFS strand yielded a U‐Pb calcite date of 114.1 ± 7.0 Ma. These data demonstrate that the AFS was abandoned and deformation (re) initiated on the TFS between ~114–107 Ma, with continued slip after intrusion of the Tropezón (~110 Ma) and Librillo (106–101 Ma) plutonic complexes. Emplacement of a ~146 Ma rhyolite dike along the main Taltal fault and 141 ± 11 Ma calcite mineralization in the fault core suggests that a precursor structure influenced magma emplacement and fluid flow in the Late Jurassic/Early Cretaceous, supporting the hypothesis that the TFS reactivated long‐lived inherited crustal weaknesses. The Early Cretaceous shift from arc‐parallel shear to slip on the TFS and E‐W shortening shortly preceded migration of the magmatic arc and records a change in the Chilean margin subduction dynamics.
more » « less- Award ID(s):
- 1822064
- NSF-PAR ID:
- 10373547
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Tectonics
- Volume:
- 39
- Issue:
- 2
- ISSN:
- 0278-7407
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Magmatic arcs may play a major role in the initiation, behavior, and abandonment of intra‐arc strike‐slip systems. Here we present zircon U‐Pb and (U‐Th)/He geochronology/thermochronology with new mapping to relate Coastal Cordillera arc magmatism to sinistral shear along the Atacama fault system (AFS) in northern Chile. New dates from 18 intrusions along the AFS between 24.6°S and 27°S compiled with published data record a minor Early Jurassic magmatic pulse (195–175 Ma), broad latest Jurassic to Early Cretaceous (150–120 Ma) pulse, and a minor younger (120–105 Ma) pulse. Mylonitization occurred only along the margins of Early Cretaceous plutons and surrounding Paleozoic metasedimentary rock, whereas Jurassic plutons and metasedimentary rocks away from Early Cretaceous plutons lack mylonitic fabrics. Early Cretaceous magmatism facilitated AFS deformation by thermally weakening the crust with elevated geothermal gradients that enabled mylonitization to take place at ~5‐ to 7‐km depths and low stresses. Spatial variability of pluton emplacement produced significant rheological heterogeneity, giving rise to a highly segmented fault system that did not originate as a regional‐scale shear zone. Synkinematic dikes (~120–117 Ma) cut mylonitic fabrics, and a postkinematic dike (~110 Ma) records the end stages of slip. The cessation of slip coincided with cooling below ~180 °C at ~116–99 Ma as arc magmatism migrated eastward and geothermal gradients relaxed, coeval with a major reorganization in plate motion and the onset of seafloor spreading in the south Atlantic.
-
The Alaska Range suture zone exposes Cretaceous to Quaternary marine and nonmarine sedimentary and volcanic rocks sandwiched between oceanic rocks of the accreted Wrangellia composite terrane to the south and older continental terranes to the north. New U-Pb zircon ages, 40Ar/39Ar, ZHe, and AFT cooling ages, geochemical compositions, and geological field observations from these rocks provide improved constraints on the timing of Cretaceous to Miocene magmatism, sedimentation, and deformation within the collisional suture zone. Our results bear on the unclear displacement history of the seismically active Denali fault, which bisects the suture zone. Newly identified tuffs north of the Denali fault in sedimentary strata of the Cantwell Formation yield ca. 72 to ca. 68 Ma U-Pb zircon ages. Lavas sampled south of the Denali fault yield ca. 69 Ma 40Ar/39Ar ages and geochemical compositions typical of arc assemblages, ranging from basalt-andesite-trachyte, relatively high-K, and high concentrations of incompatible elements attributed to slab contribution (e.g., high Cs, Ba, and Th). The Late Cretaceous lavas and bentonites, together with regionally extensive coeval calc-alkaline plutons, record arc magmatism during contractional deformation and metamorphism within the suture zone. Latest Cretaceous volcanic and sedimentary strata are locally overlain by Eocene Teklanika Formation volcanic rocks with geochemical compositions transitional between arc and intraplate affinity. New detrital-zircon data from the modern Teklanika River indicate peak Teklanika volcanism at ca. 57 Ma, which is also reflected in zircon Pb loss in Cantwell Formation bentonites. Teklanika Formation volcanism may reflect hypothesized slab break-off and a Paleocene–Eocene period of a transform margin configuration. Mafic dike swarms were emplaced along the Denali fault from ca. 38 to ca. 25 Ma based on new 40Ar/39Ar ages. Diking along the Denali fault may have been localized by strike-slip extension following a change in direction of the subducting oceanic plate beneath southern Alaska from N-NE to NW at ca. 46–40 Ma. Diking represents the last recorded episode of significant magmatism in the central and eastern Alaska Range, including along the Denali fault. Two tectonic models may explain emplacement of more primitive and less extensive Eocene–Oligocene magmas: delamination of the Late Cretaceous–Paleocene arc root and/or thickened suture zone lithosphere, or a slab window created during possible Paleocene slab break-off. Fluvial strata exposed just south of the Denali fault in the central Alaska Range record synorogenic sedimentation coeval with diking and inferred strike-slip displacement. Deposition occurred ca. 29 Ma based on palynomorphs and the youngest detrital zircons. U-Pb detrital-zircon geochronology and clast compositional data indicate the fluvial strata were derived from sedimentary and igneous bedrock presently exposed within the Alaska Range, including Cretaceous sources presently exposed on the opposite (north) side of the fault. The provenance data may indicate ~150 km or more of dextral offset of the ca. 29 Ma strata from inferred sediment sources, but different amounts of slip are feasible. Together, the dike swarms and fluvial strata are interpreted to record Oligocene strike-slip movement along the Denali fault system, coeval with strike-slip basin development along other segments of the fault. Diking and sedimentation occurred just prior to the onset of rapid and persistent exhumation ca. 25 Ma across the Alaska Range. This phase of reactivation of the suture zone is interpreted to reflect the translation along and convergence of southern Alaska across the Denali fault driven by highly coupled flat-slab subduction of the Yakutat microplate, which continues to accrete to the southern margin of Alaska. Furthermore, a change in Pacific plate direction and velocity at ca. 25 Ma created a more convergent regime along the apex of the Denali fault curve, likely contributing to the shutting off of near-fault extension- facilitated arc magmatism along this section of the fault system and increased exhumation rates.more » « less
-
Cooling ages of tectonic blocks between the Yakutat microplate and the Fairweather transform boundary fault reveal exhumation due to strike-slip faulting and subsequent collision into this tectonic corner. The Yakutat and Boundary faults are splay faults that define tectonic panels with bounding faults that have evidence of both reverse and strike-slip motion, and they are parallel to the northern end of the Fairweather fault. Uplift and exhumation simultaneous with strike-slip motion have been significant since the late Miocene. The blocks are part of an actively deforming tectonic corner, as indicated by the ~14–1.5 m of coseismic uplift from the M 8.1 Yakutat Bay earthquake of 1899 and 4 m of strike-slip motion in the M 7.9 Lituya Bay earthquake in 1958 along the Fairweather fault. New apatite (U-Th-Sm)/He (AHe) and zircon (U-Th)/He (ZHe) data reveal that the Boundary block and the Russell Fiord block have different cooling histories since the Miocene, and thus the Boundary fault that separates them is an important tectonic boundary. Upper Cretaceous to Paleocene flysch of the Russell Fiord block experienced a thermal event at 50 Ma, then a relatively long period of burial until the late Miocene when initial exhumation resulted in ZHe ages between 7 and 3 Ma, and then very rapid exhumation in the last 1–1.5 m.y. Exhumation of the Russell Fiord block was accommodated by reverse faulting along the Yakutat fault and the newly proposed Calahonda fault, which is parallel to the Yakutat fault. The Eocene schist of Nunatak Fiord and 54–53 Ma Mount Stamy and Mount Draper granites in the Boundary block have AHe and ZHe cooling ages that indicate distinct and very rapid cooling between ca. 5 Ma and ca. 2 Ma. Rocks of the Chugach Metamorphic Complex to the northeast of the Fairweather fault and in the fault zone were brought up from 10–12 km at extremely high rates (>5 km/m.y.) since ca. 3 Ma, which implies a significant component of dip-slip motion along the Fairweather fault. The adjacent rocks of the Boundary block were exhumed with similar rates and from similar depths during the early Pliocene, when they may have been located 220–250 km farther south near Baranof Island. The profound and significant exhumation of the three tectonic blocks in the last 5 m.y. has probably been driven by uplift and erosional exhumation due to contraction as rocks collide into this tectonic corner. The documented spatial and temporal pattern of exhumation is in agreement with the southward shift of focused exhumation at the St. Elias syntaxial corner and the southeast propagation of the fold-and thrust belt.more » « less
-
The Tibetan Plateau, the largest highland on Earth, formed due to the collision of India-Asia over the past 50−60 m.y., and the evolution of the Tibetan Plateau impacts our knowledge of continental tectonics. Examination of the northernmost margin of the Tibetan Plateau is key to unravelling the deformation mechanisms acting in northern Tibet. The left-slip Altyn Tagh fault system defines the northwest margin of the Tibetan Plateau, separating the Western and Eastern Kunlun Ranges in the southwest. Both Cenozoic and pre-Cenozoic crustal deformation events at this junction between the Altyn Tagh and Kunlun Ranges were responsible for the construction of northwestern Tibet, yet the relative contribution of each phase remains unconstrained. The western domain of the Eastern Kunlun Range is marked by active NE-trending, left-slip deformation of the Altyn Tagh fault and an E-striking Cenozoic thrust system developed in response India-Asia collision. To better constrain the Paleozoic Altyn Tagh and Kunlun orogens and establish the Cenozoic structural framework, we conducted an integrated investigation involving detailed geologic mapping (∼1:50,000 scale), U-Pb zircon geochronology, and synthesis of existing data sets across northwestern Tibet. Our new zircon analyses from Paleoproterozoic−Cretaceous strata constrain stratigraphic age and sediment provenance and highlight Proterozoic−Paleozoic arc activity. We propose a tectonic model for the Neoproterozoic−Mesozoic evolution of northwestern Tibet wherein restoration of an ∼56-km-long balanced cross section across the western domain of the Eastern Kunlun suggests that Cenozoic minimum shortening strain was ∼30% (∼24 km shortening). Field evidence suggests this shortening commenced after ca. 25−20 Ma, which yields an average long-term shortening rate of 1.2−0.9 mm yr−1 and strain rates of 4.7 × 10−16 s−1 to 2.3 × 10−16 s−1. Geometric considerations demonstrate that this contractional deformation did not significantly contribute to left-slip offset on the Altyn Tagh fault, which has ∼10 mm/yr slip rates.more » « less
