skip to main content

Attention:

The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 11:00 PM ET on Thursday, October 10 until 2:00 AM ET on Friday, October 11 due to maintenance. We apologize for the inconvenience.


Title: Predicting textural variability effects in the anisotropic plasticity and stability of hexagonal metals: Application to magnesium and its alloys
This work systematically investigates the texture-property linkages in hexagonal close-packed (hexagonal) materials using a three-dimensional computational crystal plasticity approach. Magnesium and its alloys are considered as a model system. We perform full-field, large-strain, micromechanical simulations using a wide range of surrogate textures that also sample several experimental datasets for a range of Mg alloys. The role of textural variability and the associated sensitivity of deformation mechanisms on the evolution of the macroscopic plastic anisotropy and strength asymmetry is mapped under uniaxial tensile and compressive loading along the material principal and off-axes orientations. To assess the role of crystallographic plastic anisotropy, two distinct material datasets are simulated, which represent pure and alloyed magnesium. The results provide insights into experimental observations reported for magnesium alloys over a range of materials textures. We discuss potential implications on the damage tolerance from the aggregate plastic anisotropy arising from intrinsic crystallographic and textural effects.  more » « less
Award ID(s):
1932976
NSF-PAR ID:
10165732
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
International journal of plasticity
ISSN:
0749-6419
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null ; null ; Jordon J.B., Neelameggham N.R. (Ed.)
    The remarkable crystallographic plastic anisotropy of magnesium and its alloys reflects in its polycrystal response via texture. While texture-strength linkages have been studied, the role of textural variability on damage remains elusive. The challenge is to obtain relevant metrics that relate the net plastic anisotropy to macroscopic modes of damage. A possible approach is to adopt mechanistic descriptions of the damage. Motivated by the recent experimental and theoretical works in this direction, here we appeal to the Hill yield function to characterize the net plastic anisotropy of polycrystalline magnesium via the Hill plastic anisotropy tensor h. Metrics based on the components of h offer a way to predict damage as a possible damage predictor. Using the results from our recent extensive three-dimensional crystal plasticity simulations for a wide range of textures, we map the net plastic anisotropy onto the coefficients of h, separately for the tensile and compressive responses. Metrics based on these coefficients serve as indicators for the propensity of textured polycrystals to damage by: (i) porosity evolution, or (ii) shear instability. An attempt is made to understand the potential roles textural variability and crystallographic plastic anisotropy play in damage under different loading conditions. 
    more » « less
  2. Chief-in-Editor: Jacob Fish Senior Advisor: J. Tinsley Oden Associate Editors: Somnath Ghosh, Arif Masud (Ed.)

    Aspects of plastic anisotropy in damage accumulation are considered for a class of hexagonal crystals that deform by combined slip and twinning. Focus is placed on crystallographic aspects that are currently absent from constitutive formulations of ductile damage. To this end, three-dimensional finite-element calculations are carried out using a cubic unit cell containing a single void embedded in a crystal matrix. Plastic flow in the latter is described using crystal plasticity with parameters representative of single crystal pure magnesium. The effect of void oblateness is analyzed in some detail, as voids often form as blunted microcracks in Mg alloys. The analyses reveal two aspects peculiar to twinning-mediated void growth: (1) insensitivity of the effective stress-strain response to void oblateless and (2) a plastic auxetic effect. Both aspects manifest under certain circumstances. Some implications in terms of incorporating the uncovered crystallographic aspects in coupled plasticity-damage formulations of anisotropic materials are discussed.

     
    more » « less
  3. Deformation twinning is a prevalent plastic deformation mode in hexagonal close-packed (HCP) materials, such as magnesium, titanium, and zirconium, and their alloys. Experimental observations indicate that these twins occur heterogeneously across the polycrystalline microstructure during deformation. Morphological and crystallographic distribution of twins in a deformed microstructure, or the so-called twinning microstructure, significantly controls material deformation behavior, ductility, formability, and failure response. Understanding the development of the twinning microstructure at the grain scale can benefit design efforts to optimize microstructures of HCP materials for specific high-performance structural applications. This article reviews recent research efforts that aim to relate the polycrystalline microstructure with the development of its twinning microstructure through knowledge of local stress fields, specifically local stresses produced by twins and at twin/grain–boundary intersections on the formation and thickening of twins, twin transmission across grain boundaries, twin–twin junction formation, and secondary twinning. 
    more » « less
  4. Abstract

    Earth’s inner core exhibits strong seismic anisotropy, often attributed to the alignment of hexagonal close‐packed iron (hcp‐Fe) alloy crystallites with the Earth’s poles. How this alignment developed depends on material properties of the alloy and is important to our understanding of the core’s crystallization history and active geodynamical forcing. Previous studies suggested that hcp‐Fe is weak under deep Earth conditions but did not investigate the effects of the lighter elements known to be part of the inner core alloy. Here, we present results from radial X‐ray diffraction experiments in a diamond anvil cell that constrain the strength and deformation properties of iron‐nickel‐silicon (Fe–Ni–Si) alloys up to 60 GPa. We also show the results of laser heating to 1650 K to evaluate the effect of temperature. Observed alloy textures suggest different relative activities of the various hcp deformation mechanisms compared to pure Fe, but these textures could still account for the theorized polar alignment. Fe–Ni–Si alloys are mechanically stronger than Fe and Fe–Ni; extrapolated to inner core conditions, Si‐bearing alloys may be more than an order of magnitude stronger. This enhanced strength proportionally reduces the effectivity of dislocation creep as a deformation mechanism, which may suggest that texture developed during crystallization rather than as the result of postsolidification plastic flow.

     
    more » « less
  5. Hexagonal close-packed (HCP) magnesium alloys are widely used in automotive and aerospace industries due to their low density and high specific-strength. Their applicability is mainly restricted due to poor formability and pronounced plastic anisotropy. The formability is usually improved by altering the chemistry (adding rare-earth elements like Y) or modulating the microstructure (e.g., grain refinement). However, grain refinement alone cannot yield the desired ductility, and the scarcity of rare-earth elements also limits the extent to which the alloying strategy can be used. To overcome these issues, in this work, it is proposed that the formability of Mg alloys can be improved by combining the grain refinement and alloying approaches. To quantitively explore this possibility, a crystal-plasticity-based constitutive model, which is sensitive to both alloying concentration and grain sizes, is developed. To demonstrate, the model is applied to study the combined effect of Y content and grain size on the mechanical responses of Mg alloy. The calculations are used to build maps of plastic anisotropy measures, such as tension–compression asymmetry ratio and Lankford coefficients, for a wide range of Y content and grain sizes. From these maps, the grain size that would yield the desired performance of Mg alloy for a fixed Y content can be identified. This work provides an accelerated pathway to optimize both the microstructure and chemistry simultaneously to achieve formability and to reduce the dependence on alloying. 
    more » « less